Reviews

F1/ suite 300; remove walls, reconfigure for offices, doors, relites, remodel restrooms, ceiling, elec, plbg,

F1/ suite 300; varonis, remove walls, reconfigure for offices, doors, relites, remodel restrooms, ceiling, elec, plbg,

B2/ revision to egress lighting

Plumbing renovation at hamilton building suite 3 for avronis tirelocate sink and urinal, demo wc

Suite 300/add (3) sprinklers to accommodate remodel

Power - suite 300; remove walls, reconfigure for offices, doors, relites, remodel restrooms, ceiling, elec, plbg, lighting

Historic resource review approval of a new, non-illuminated blade sign on the hamilton building in the downtown subdistrict of the central city plan district. The sign is 9. 33 square feet in face area and measures 32 inches tall, 42 inches long, and 2 inches thick, made from an aluminum base painted in black matte paint, with -inch-thick white, matte pvc lettering, per the approved plans, exhibits c. 1 through c. 4, signed and dated may 15, 2015, subject to the following conditions:a. As part of the building permit application submittal, the following development-related condition b must be noted on each of the four required site plans or included as a sheet in the numbered set of plans. The sheet on which this information appears must be labeled zoning compliance page- case file lu 15-129514 hr. All requirements must be graphically represented on the site plan, landscape, or other required plan and must be labeled required. B. All mounting screws and/or bolts will be installed through ex

Voice data, power - suite 300; varonis, remove walls, reconfigure for offices, doors, relites, remodel restrooms, ceiling, elec, plbg,

Suite #300- alteration to the fire alarm as needed for t. I.- 8 devices total 4- strobes4- h/s

F15/ wildwood bespoke - create production and customer consultation rooms

B2/ add new fan coil unit

B2/ suite 300, replace two indoor split system units

Power - wildwood bespoke - create production and customer consultation rooms

Controls - wildwood bespoke - create production and customer consultation rooms

Plumbing renovation at hamilton building suite 1 for wildwood bespokereplace counter top sink with wall hung sink

Hvac stat - suite 300; varonis, remove walls, reconfigure for offices, doors, relites, remodel restrooms, ceiling, elec, plbg,

B1/ suite 1 - malka diamonds & jewelry - remove toilet room and install two sinks

Plumbing renovation at hamilton building for malka ti2 sinks

Pwr - suite 1 - malka diamonds & jewelry - remove toilet room and install two sinks - pwr

New non illuminated projecting sign on the south elevation

New non illuminated projecting sign on the south elevation

New non illuminated projecting sign on the south elevation

New non illuminated projecting sign on the south elevation

New non illuminated projecting sign on the south elevation

F8/ 6th floor; renovate/reconfigure two restrooms to ada requirements, office ceiling, elec, plbg

F8/ 6th floor; structural repairs to 6th floor framing,

B2/ revision to clarify structural detail/adequacy of hanging, folding panel partition wall system between conference rooms 1 & 2

F3/ suite 400; rev-01 4th floor joist repair of existing conditions uncovered during demo work

Construction - hoisting material on & off roof

F15/ 2nd floor quick left existing tenant - add new walls for 3 new offices and a conference room

F15/ 2nd floor quick left - existing tenant - add new walls for 3 new offices and a conference room.

Power - 2nd floor quick left - existing tenant - add new walls for 3 new offices and a conference room.

F12/ suite 3 landlord work for future tenant, remove some walls and ada barrier removal

Remove 48 in cubicle walls, repair carpet, remove approx 12 ft of wall to drop ceiling height in preparation of new cubicles

Remove 48 in cubicle walls, repair carpet, remove approx 12 ft of wall to drop ceiling height in preparation of new cubicles

Power - move overhead door to new location/create two new offices and new storage room/suite 600

Suite #600- relocate (1), delete (1) sprinkler for t. I.

Provide fire alarm and electrical work required for upgrade of the elevator in the building

Installation of comcast coaxfaxed

Plumbing renovation at hamilton building suite 1 for wildwood bespokereplace counter top sink

New non illuminated projecting sign on the south elevation

F27/move overhead door to new location,/create two new offices and new storage room/suite 600

F27/move overhead door to new location/create two new offices and new storage room/suite 600

Remove 48 in cubicle walls, repair carpet, remove approx 12 ft of wall to drop ceiling height in preparation of new cubicles

Remove 48 in cubicle walls, repair carpet, remove approx 12 ft of wall to drop ceiling height in preparation of new cubicles

Power - move overhead door to new location create two new offices and new storage room suite 600

F8 6th floor; renovate reconfigure two restrooms to ada requirements, office ceiling, elec, plbg

F8 6th floor; structural repairs to 6th floor framing,

B2 revision to clarify structural detail adequacy of hanging, folding panel partition wall system between conference rooms 1 & 2

F3 suite 400; rev-01 4th floor joist repair of existing conditions uncovered during demo work

F1 suite 300; varonis, remove walls, reconfigure for offices, doors, relites, remodel restrooms, ceiling, elec, plbg,

Historic resource review approval of a new, non-illuminated blade sign on the hamilton building in the downtown subdistrict of the central city plan district. The sign is 9. 33 square feet in face area and measures 32 inches tall, 42 inches long, and 2 inches thick, made from an aluminum base painted in black matte paint, with -inch-thick white, matte pvc lettering, per the approved plans, exhibits c. 1 through c. 4, signed and dated may 15, 2015, subject to the following conditions:a. As part of the building permit application submittal, the following development-related condition b must be noted on each of the four required site plans or included as a sheet in the numbered set of plans. The sheet on which this information appears must be labeled zoning compliance page- case file lu 15-129514 hr. All requirements must be graphically represented on the site plan, landscape, or other required plan and must be labeled required. B. All mounting screws and or bolts will be installed through ex

F15 wildwood bespoke - create production and customer consultation rooms

B2 add new fan coil unit

B2 suite 300, replace two indoor split system units

B1 suite 1 - malka diamonds & jewelry - remove toilet room and install two sinks

F27 move overhead door to new location, create two new offices and new storage room suite 600

F27 move overhead door to new location create two new offices and new storage room suite 600

Ti fourth floor for new tenant

Ti, new wall

Interior stair addition between third and fourth floors. Add 2 hour door at stair connecting 4th and 5th levels.

3rd floor - add walls to create addition storage area, and office space, relocate the entrances for the mens and womens restroom; 4th floor - add partition wall for decoration