"replacement of tenant panel at entrance to industrial park, monument sign, wall sign, directional signs for g. E. Aviation"

Metal building addition for unison engine components, new gc taking over permit ref. Original permit 14-03427, rec amendment to add a 12x16 o. H. Door and new 3 x 7 degree exit door

Smiths aerospace components

Building metal building addition for general electric aviation components;sls

Replace acoustic ceiling, replace existing plumbing fixtures with no additional fixtures, tile, toilet stalls, new paint for unison engine components

Unison addition

Building metal building addition for general electric aviation components;sls

03435 requires a fire construction permit for fire alarm & detection

Unison addition

Building metal building addition for general electric aviation components;sls

03435 requires a fire construction permit for sprinkler a system

Replace acoustic ceiling, replace existing plumbing fixtures with no additional fixtures, tile, toilet stalls, new paint for unison engine components

Com: mechanical

Fire prevention

Fire prevention

Com: electrical

Com: electrical

Com: plumbing

Fire alarm

Com: mechanical

Metal building addition for unison engine components, new gc taking over permit ref. Original permit 14-03427, rec amendment to add a 12x16 o. H. Door and new 3 x 7 degree exit door

Building metal building addition for general electric aviation components;sls created grading record to verify if grading permit is required;sls; rec amendment and grading application adn plans revised building sheets appendix b and electrical sheets;lss; plans in cubby; rec. Amendment(via mail) for fire sprinkler; rec letter from gc, releasing permits and fees over to new gc. Adc. See new permit no. 14-10491

Pour a concrete pad only (5x10) for future generator for g. E. Unison corporation

G e aviation/unison

Ge aviation-unison addition

G e aviation/unison

Metal building addition for unison engine components, new gc taking over permit ref. Original permit 14-03427, rec amendment to add a 12x16 o. H. Door and new 3 x 7 degree exit door

Com: mechanical

Fire prevention

Fire prevention

Ge aviation-unison addition

Com: electrical

Metal building addition for unison engine components, new gc taking over permit ref. Original permit 14-03427, rec amendment to add a 12x16 o. H. Door and new 3 x 7 degree exit door

"replacement of tenant panel at entrance to industrial park, monument sign, wall sign, directional signs for g. E. Aviation"

Level 1 submittal for proposed 74 sf open storage shed, cutting existing asphalt pavement for tree islands, new asphalt pavement on existing gravel storage/parking area for ge aviation, ok to process application per chris collins. Adc.; assigned proposed open storage covered structure a 421 sweeten creek industrial park address in gis but not recommending the address change in accela for permit tracking purposes. ; 11/10/14 3: pm - spoke with bob grasso. Amendments to plan are forthcoming. He mentioned a water line, fire hydrant and landscaping changes. Review on hold until amended plans are submitted as disturbed area will likely change.; rec one copy of site improvement plans - ok per chuck; rec amendment changing asphalt portion under shed to concrete

Com: plumbing

74 sf open storage shed, cutting existing asphalt pavement for tree islands, new asphalt pavement on existing gravel storage/parking area for ge aviation; rec amendment, appendix b and foundation sheets as requested by mark matheny. Adc.; no grading step required per ric ledford; rec amendment, additional work to place metal siding on 1 bay of building; rec amendment, change paving layout at buildings. Adc.; rec amendment, additional information to close in one bay of metal building with siding for storage per marni graves review comments. Adc.; rec amendment, revised plans for additional info per plan reveiw for enclosing end bay;

74 sf open storage shed, cutting existing asphalt pavement for tree islands, new asphalt pavement on existing gravel storage/parking area for ge aviation

January 22, 2007 4:12:29 pm bdavis smiths aerospace fire alarm; question of battery standby calculations; new fire alarm upgrades fire marshal? S office plan review comments read attached fire prevention comment sheet the approved plans with the attached plan review comments are required to be on the job site at all times. Call for all fire inspections at 828-redacted phone number between the hours of 8: and 9: for a same day inspection. All calls received past 9: am will be scheduled for the next business day. Fire prevention plan review questions may also be directed to this phone number.: the contractor and any affected subcontractor(s) are expected to read and comply with the fire code, all the plan review comments, and are subject to any needed correction orders per ncgs 160a-417 thru 425. Your permit must be posted at the job site at all times or a 100. Stop order fine will be assessed. There may be other technical issues that are identified during the construction process. Issua

September 18, 2008 1:12:47 pm ssalyer. Install new device and connect to existing system;add fire proetction system for unison;sls; fire marshals office plan review comments read attached fire prevention comment sheet the approved plans with the attached plan review comments are required to be on the job site at all times. Call for all fire inspections at 828-redacted phone number between the hours of 8: and 9: for a same day inspection. All calls received past 9: am will be scheduled for the next business day. Fire prevention plan review questions may also be directed to this phone number. The contractor and any affected subcontractor(s) are expected to read and comply with the fire code, all the plan review comments, and are subject to any needed correction orders per ncgs 160a-417 thru 425. Your permit must be posted at the job site at all times or a 100. Stop order fine will be assessed. There may be other technical issues that are identified during the construction process. Iss

September 1, 20 10:36:02 am ssalyer. Commercial reroof;spring elastic coating over exisitng roofing for unison engine/ge;ref 10-4107 for open interior remodel permit;sls; building safety comments see the review comments sheet for additional information and requirements. Building code inspection requests must be received before 7: a. M.: phone: redacted phone number. Internet: go to www. Ashevillenc. Gov; select online services; select permit tracking help; select development & building permit tracking tool and enter permit # the building code inspectors assigned to this project can be reached on their cell: building - gary stamey redacted phone number electrical - larry davis redacted phone number plumbing / mechanical / gas piping - alec arthur redacted phone number use of open flame roofing torches= required 2 minimum 20bc rated fire extinguishers within feet of hot work. Lp gas on the roof shall be limited to 20lb cylinders with a maximum tota

Fire alarm

September 24, 20 10:18:25 am kneel. Ge employee health fair - 10/6/20 rfom 5:30am to 5: pm, (1) 30x45 tent.; building safety comments see the review comments sheet for additional information and requirements. Building code inspection requests must be received before 7: a. M.: phone: redacted phone number. Internet: go to www. Ashevillenc. Gov; select online services; select permit tracking help; select development & building permit tracking tool and enter permit # the building code inspectors assigned to this project can be reached on their cell: building - gary stamey redacted phone number electrical - larry davis redacted phone number plumbing / mechanical / gas piping - alec arthur redacted phone number ; fire marshals office plan review comments read attached fire prevention comment sheet the approved plans with the attached plan review comments are required to be on the job site at all times. Call for all fire inspections at 828-redacted pho

Ge aviation-unison addition to add mechanical room to east side of building; har; rec. Amendment(via mail) for fire sprinkler; rec. Amendment for fire alarm work

Metal building addition for unison engine components, new gc taking over permit ref. Original permit 14-03427, rec amendment to add a 12x16 o. H. Door and new 3 x 7 degree exit door; architect pete knowland was hired by the owner after original gc was removed from permit. Knowland identified several deviations and code violations in the field. He has since provided code review and analysis to support the progression of the project. His letter is attached and approved.; the scope of work for this contractor was limited to the metal building addition on the end of the building. The original contractor (all mechanical) was calling for inspections under two numbers 13-07973 (mechanical room addition) and 14-03427 (mtl bldg addition). G. E. M. Is not taking responsiblilty for any of the work on the mechanical room addition. All work inspected.

Metal building addition for unison engine components, new gc taking over permit ref. Original permit 14-03427, rec amendment to add a 12x16 o. H. Door and new 3 x 7 degree exit door

Ge aviation-unison addition