Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Original permit description:(com2014-32024)renovation of existing 12-story apartment building includes replacement of interior finishes plumbing fixtures lighting fixtures exterior windows and doors common areas will be renovated with new non-load be Permit id: Com2015-26632 | |||||
Remove (3) existing antennas/radios and replace with (3) new antennas/radios of a new model type on existing roofto . Re-run new low voltage coax cables as per plans as per code. Permit id: Com2015-06751 | |||||
Renovation of existing 12-story apartment building includes replacement of interior finishes plumbing fixtures lighting fixtures exterior windows and doors common areas will be renovated with new non-load bearing walls exterior facade to receive new Permit id: Com2014-32024 | |||||
Replacing (3) obsolete antennas with new model type replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas as per plans and as per code. If installing suppression system in equipment cabinet then a separate Permit id: Com2013-01636 | |||||
Original permit description:(com2013-01982)adding one new microwave dish (vhlp1-23) to be mounted to existing sled mount as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required Permit id: Com2013-09102 | |||||
Adding one new microwave dish (vhlp1-23) to be mounted to existing sled mount as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required Permit id: Com2013-01982 | |||||
Replace (6) existing antennas with (6) new antennas. Decommission (1) existing cabinet. Retrofit (1) existing cabinet. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Permit id: Com2012-13729 | |||||
"run 2"" conduit for fiber cable to rooftop p. H. Fiber control box from basement. As per plan & as per code. If installing suppression system in equipment cabinet then a separate permit is required." Permit id: Com2012-10118 | |||||
Remove/replace 2 unmanned equipement cabinets on rooftop. Remove 1 unmanned equipment cabinet on rooftop. Remove/replace 6 antennas on rooftop as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is requir Permit id: Com2011-26228 | |||||
Addition of (2) microwave dish antennas to existing rooftop telecom site as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Permit id: Com2009-19309 | |||||
Request for time extension on permit # com2008-258 issued on 09-29-08 with original completion date of 03-29-09. Original permit description:(com2008-25850)balcony waterproofing. Exterior concrete wall patching & caulking as per code as per plans. Permit id: Com2009-21052 | |||||
Amend permit com2008-32903 issued on 03/18/2009 with plans 2008-1697 to add electrical contractor as listed above. Original permit description:(com2008-32903)add (3) antennas and equipment on a grated steel platform to the existing rooftop per bmza 784- Permit id: Com2009-08227 | |||||
Add (3) antennas and equipment on a grated steel platform to the existing rooftop per bmza 784-08 approved 11-18-08. If installing suppression system in equipment cabinet(s) then a seperate permit is required. Permit id: Com2008-32903 | |||||
Install new dish antennas on existing rooftop as per plans and as per code. Permit id: Com2008-23379 | |||||
Sprint will replace (3) existing cdma antennas and install (6) iden antennas cables and telecommunications equipment on roof Permit id: Com2008-04904 | |||||
Balcony waterproofing. Exterior concrete wall patching & caulking as per code as per plans. Permit id: Com2008-25850 | |||||
Install 1 dish antenna mounted to existing penthouse facade with 1 equipment cabinet on existing roof as per plan and as per code. Permit id: Com2008-11840 | |||||
Remove and replace existing sidewalk on housing development premises. Grind mis-aligned concrete joints on all concrete sidewalk as identified as per code Permit id: Com2008-04098 | |||||
Construct room divder partition wall. Install wire mold electrical outlet extension to code. Permit id: Com2008-06300 | |||||
Install (12) cctv cameras (1) dvr (1) power supply (1) video monitor as per code. Permit id: Com2008-05955 | |||||
Interior work to replace kitchens bathroom and doors. Same size and location. Replace gfis and light fixtures reconstruct water and waste line. Replace toilet sink tub install grab bars. All work per code. Permit id: Com2007-08986 | |||||
Electrical work related to the upgrade of two passenger elevators. Permit id: Com2005-34264 | |||||
Amend permit# com2004-32131 issue date 1/27/05 with electrical sub contractor as listed above job# ssm05-532 Permit id: Com2005-19115 | |||||
Install 1-6 backflow preventor Permit id: Com2005-12814 | |||||
Relocation of light switches plug receptacles for handicap access total of 22 outlets Permit id: Com2005-07768 | |||||
Replacement of old elevator equipment with new equipment. Installation of new elevator equipment to consist of: brake / rope gripper governor hoist cables guide shoes controller travel calbe hall wtations and signal fixctures control operatin pane Permit id: Com2005-02568 | |||||
Install new fire alarm system per plans. Replacement of fire pump. Separate permit is required for electrical for wiring of electrical fire pump. Permit id: Com2004-32131 | |||||
Replacement of existing fire pump with new pump and addition of sprinklers in units to provide coverage in bathrooms and closets. Permit id: Com2004-29642 | |||||
Amend permit 185515 to add electrical contractor. Permit id: Com2002-08251 | |||||
Install 2 amp service for communications equipment 4 ckt 1 devece Permit id: Com2002-03992 | |||||
Replace dumpster pad 14 x 23 concrete replace sq. Ft. Sidewalk over lay parking lot. 26 sq ft yds. Permit id: Com2002-03278 | |||||
Construct rooftop platform (10x15) with equipment cabinets and install antennas on the exist building as per plans. Per bmza 181-02 Permit id: Com2002-01451 | |||||
Amend permit com2008-32903 issued on 03/18/2009 with plans 2008-1697 to add electrical contractor as listed above. Original permit description:(com2008-32903)add (3) antennas and equipment on a grated steel platform to the existing rooftop per bmza 784-08 approved 11-18-08. If installing suppression system in equipment cabinet(s) then a seperate permit is required. Expiration date: September 18, 2009 | Permit id: Com2009-08227 | |||||
Replacing (3) obsolete antennas with new model type replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: October 28, 2014 | Permit id: Com2013-01636 | |||||
Remove/replace 2 unmanned equipement cabinets on rooftop. Remove 1 unmanned equipment cabinet on rooftop. Remove/replace 6 antennas on rooftop as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: December 16, 2012 | Permit id: Com2011-26228 | |||||
Run 2" conduit for fiber cable to rooftop p. H. Fiber control box from basement. As per plan & as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: May 18, 2013 | Permit id: Com2012-10118 | |||||
Renovation of existing 12-story apartment building includes replacement of interior finishes plumbing fixtures lighting fixtures exterior windows and doors common areas will be renovated with new non-load bearing walls exterior facade to receive new waterproofing coating as per plans and as per code. Expiration date: April 14, 2017 | Permit id: Com2014-32024 | |||||
Original permit description:(com2014-32024)renovation of existing 12-story apartment building includes replacement of interior finishes plumbing fixtures lighting fixtures exterior windows and doors common areas will be renovated with new non-load bearing walls exterior facade to receive new waterproofing coating as per plans and as per code. Expiration date: April 14, 2017 | Permit id: Com2015-26377 | |||||
Repair or install fire alarm devices in apartment building. As per plans as per code. Expiration date: February 17, 2017 | Permit id: Com2015-27668 | |||||
Install fold up grab bar in (31) bathroomsinstall (1) 24 grab bar and (1) 36 grab bar in one bathroom lower kitchen cabinets wall in ine apartment and paint (3) bathrooms and (1) kitchen. Expiration date: August 3, 2003 | Permit id: Com2003-20733 | |||||
Install radio cabinet on existing rooftop platform bmza 181-02 as per plan an amended permit must be obtain stating name of lic. Contractors before any work can be started. Expiration date: May 30, 2004 | Permit id: Com2003-24355 | |||||
Amend permit #com2003-24355 issued 5/23/03 to name electrical contractor as stated above Expiration date: January 22, 2004 | Permit id: Com2003-32953 | |||||
Remove and dispose of 1-15 0 gal underground storage tank Expiration date: December 24, 2004 | Permit id: Com2004-15410 | |||||
Replacement of old elevator equipment with new equipment. Installation of new elevator equipment to consist of: brake / rope gripper governor hoist cables guide shoes controller travel calbe hall wtations and signal fixctures control operatin panel door panels cab encolsure. Expiration date: March 7, 2006 | Permit id: Com2005-02568 | |||||
Non-structural alterations. Exterior work. Removing cricket wireless antennas only. No structural work required. As per code Expiration date: November 9, 2016 | Permit id: Com2016-11916 | |||||
Remove (3) existing antennas radios and replace with (3) new antennas radios of a new model type on existing roofto . Re-run new low voltage coax cables as per plans as per code. Expiration date: November 14, 2015 | Permit id: Com2015-06751 | |||||
Replace two antennas with two new antennas and add one rru as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Expiration date: October 21, 2017 | Permit id: Com2017-05579 | |||||
Install (3) new rrus as per plans as per code. Expiration date: July 10, 2017 | Permit id: Com2016-27450 | |||||
Install (6) # branch circuits feeders (14) # fixtures devices as per code. Expiration date: February 18, 2018 | Permit id: Com2017-59846 | |||||
Amend permit com2008-32903 issued on 03 18 2009 with plans 2008-1697 to add electrical contractor as listed above. Original permit description:(com2008-32903)add (3) antennas and equipment on a grated steel platform to the existing rooftop per bmza 784-08 approved 11-18-08. If installing suppression system in equipment cabinet(s) then a seperate permit is required. Expiration date: September 18, 2009 | Permit id: Com2009-08227 | |||||
Replacement of old elevator equipment with new equipment. Installation of new elevator equipment to consist of: brake rope gripper governor hoist cables guide shoes controller travel calbe hall wtations and signal fixctures control operatin panel door panels cab encolsure. Expiration date: March 7, 2006 | Permit id: Com2005-02568 | |||||
Amend permit# com2004-32131 issue date 1 27 05 with electrical sub contractor as listed above job# ssm05-532 Expiration date: January 27, 2006 | Permit id: Com2005-19115 | |||||
Remove replace 2 unmanned equipement cabinets on rooftop. Remove 1 unmanned equipment cabinet on rooftop. Remove replace 6 antennas on rooftop as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: December 16, 2012 | Permit id: Com2011-26228 | |||||
Amend permit #com2003-24355 issued 5 23 03 to name electrical contractor as stated above Expiration date: January 22, 2004 | Permit id: Com2003-32953 |