Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Add (3) antennas. Swap (1) amp breaker with (1) amp breaker as per plans and as per code. If installing suppression system in equipment cabinet then separate permit is required. Permit id: Com2014-17165 | |||||
Interior work 9 sqft: minor drywall repairs due to water damage. Drywall at the ground 1st 2nd & 3rd floor (patch only) as per code Permit id: Com2014-40021 | |||||
Original permit description:(com2012-10486)remove and replace existing antennas on existing structure. Antenna will be locate at same rad center as existing. Remove and replace 1 equipment cabinet at existing location. As per plans and as per code. If ins Permit id: Com2013-07646 | |||||
Remove and replace existing antennas on existing structure. Antenna will be locate at same rad center as existing. Remove and replace 1 equipment cabinet at existing location. As per plans and as per code. If installing suppression system in equipment cab Permit id: Com2012-10486 | |||||
Amend permit com2010-11897 issued on 08/04/ with plans #2010-693 to add prime and electrical contractors as listed above. Original permit description:(com2010-11897)3 antennas on existing rooftop with steel platform to hold cabinets. As per plans as pe Permit id: Com2010-18049 | |||||
3 antennas on existing rooftop with steel platform to hold cabinets. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Per bmza 2010-17 approved 3/16/10 Permit id: Com2010-11897 | |||||
Installation of (2) new and replacement/relocation of (1) antenna to wall of existing bldg as per plans as per code. Per bmza 247-02 approved june 12 2002 amended october 18 2005. Permit id: Com2005-32767 | |||||
Construct (10x15) rooftop platform with equipment cabinets and install antennas on building and on proposed platform per plans. Per bmza-247-02x approved w/ conditions june 11 2002 Permit id: Com2002-03607 | |||||
Amend permit com2010-11897 issued on 08/04/ with plans #2010-693 to add prime and electrical contractors as listed above. Original permit description:(com2010-11897)3 antennas on existing rooftop with steel platform to hold cabinets. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Per bmza 2010-17 approved 3/16/10 Expiration date: February 4, 2011 | Permit id: Com2010-18049 | |||||
Original permit description:(com2012-10486)remove and replace existing antennas on existing structure. Antenna will be locate at same rad center as existing. Remove and replace 1 equipment cabinet at existing location. As per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: June 17, 2013 | Permit id: Com2013-07646 | |||||
Remove and replace existing antennas on existing structure. Antenna will be locate at same rad center as existing. Remove and replace 1 equipment cabinet at existing location. As per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: June 17, 2013 | Permit id: Com2012-10486 | |||||
Per chap: notice to proceed: remove (3) wireless antennas and coaxial cabling as per plans. Remove (1) equipment cabinet and platform. Remove pyc cabinet and associated conduit. Remove equipment grounding system. New replacement equipment tbd in future atp Expiration date: August 23, 2016 | Permit id: Com2015-29565 | |||||
Ammend permit com220-03607 to name electrical contractor; t&b electric. Expiration date: April 29, 2003 | Permit id: Com2002-14545 | |||||
Temp 2 amp service 1 circuit Expiration date: May 18, 2003 | Permit id: Com2002-16025 | |||||
Remove and add 2 antennas and one rru as per plans as per code. Expiration date: October 10, 2017 | Permit id: Com2017-05728 | |||||
Addition of 3 remote radio heads to existing mounts as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required Expiration date: July 18, 2017 | Permit id: Com2016-10707 | |||||
Amend permit: add prime contractor . Extend original permit.(original permit:com2016-10707:addition of 3 remote radio heads to existing mounts as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required)original permit description:(com2016-10707)addition of 3 remote radio heads to existing mounts as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required Expiration date: February 16, 2018 | Permit id: Com2017-14441 | |||||
Extend original permit.(original permit:com2017-05728:remove and add 2 antennas and one rru as per plans as per code.)original permit description:(com2017-05728)remove and add 2 antennas and one rru as per plans as per code. Expiration date: April 23, 2018 | Permit id: Com2017-16685 | |||||
Installation of (2) new and replacement relocation of (1) antenna to wall of existing bldg as per plans as per code. Per bmza 247-02 approved june 12 2002 amended october 18 2005. Expiration date: November 4, 2006 | Permit id: Com2005-32767 | |||||
Construct (10x15) rooftop platform with equipment cabinets and install antennas on building and on proposed platform per plans. Per bmza-247-02x approved w conditions june 11 2002 Expiration date: September 16, 2003 | Permit id: Com2002-03607 | |||||
Amend permit com2010-11897 issued on 08 04 with plans #2010-693 to add prime and electrical contractors as listed above. Original permit description:(com2010-11897)3 antennas on existing rooftop with steel platform to hold cabinets. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Per bmza 2010-17 approved 3 16 10 Expiration date: February 4, 2011 | Permit id: Com2010-18049 | |||||
3 antennas on existing rooftop with steel platform to hold cabinets. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Per bmza 2010-17 approved 3 16 10 Expiration date: February 4, 2011 | Permit id: Com2010-11897 |