"repair 2"" galvanize water line as per code"

Exterior work: for each of the three antenna sector. Replace (1) (e) 19 with (1) (n) 19 antennab. Replace (1) (e) 19 with (1) (n) 21 antenna c. Mount (1) (n) sector box and (1) (n) remote radio head on existing frame d. Run (1) (n) hybrid cable fr

Original permit description:(com2012-23913)replacing (3) obsolete antennas with new model type. Replacing (3)transceivers located at the base to the backside of new antennas as per plans as per code. If installing suppression system in equipment cabinet t

For each of the three antenna sector: replace (1)(e) 19 with (1)(n) 19 antenna b. Replace (1)(e) 19 with (1)(n) 21 antennac. Mount (1)(n) sector box and (1)(n) remote radio head on existing framed. Run (1)(n) hybrid cable from shelter distributio

Original permit description:(com2012-09546)non-structural alterations/exterior work;remove and replace existing antennas on existing structure; antenna will be located at same rad center as existing; retrofit existing and add equipment cabinet at existing

Replacing (3) obsolete antennas with new model type. Replacing (3)transceivers located at the base to the backside of new antennas as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Non-structural alterations/exterior work;remove and replace existing antennas on existing structure; antenna will be located at same rad center as existing; retrofit existing and add equipment cabinet at existing location as per plans as per code. If inst

Replace heat pump for meeting room - same size and same location - as per code.

Preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated to be array on our building #8 and associated equipment preperation to include refurbishing a portion of roof on building #8 cutting installation hole

Amend permit #com2011-08563 issued on 05/10/11 with plans #2011-571 to add hvac contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated

Amend permit # com2011-08563 issued on 05-10-11 with plans # 2011-571 to add electrical contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar eva

Amend permit com2011-08563 issued on 05/10/11 with plans #2011-571 to add prime contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated

At&t will install 1 equipment cabinet at this existing telecommunications site as per plans & as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Request for time extension on permit #com2008-21792 issued on 09/30/08 with original completion date of 03/30/09 and amend to add prime contractor as listed above. Original permit description:(com2008-21792)install new dish antennas on existing tower as

At&t proposes to install (3) antennas at existing telecommunicatuions site as per plans as per code. If installing suppression system in equipment cabinets then a separate permit is required.

Add three (3) antennas to the existing verizon wireless installation on the rooftop of the existing building as per plans as per code. If installing suppression system in equipment cabinets then a separate permit is required.

"install one transport dish on an existing at&t antenna mount and a 3/8"" dia coax cable from the existing at&t equipment to the transport dish as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is requ"

Install new dish antennas on existing tower as per plans as per code.

Install unmanned cabinet inside second level and (1) panel antenna mounted to existing penthouse facade as per plans and code.

Reinstate permit com2005-19785 for thirty days for final inspectionoriginal permit description:(com2005-19785)maintenance upgrade- replacement of 9 antennas with 6 antennas on a existing rooftop and install one equiment cabinet on an existing rooftop equi

Reinstate permit # com2005-19785 for thirty (30) days for final inspection. Original permit description:(com2005-19785)maintenance upgrade- replacement of 9 antennas with 6 antennas on a existing rooftop and install one equiment cabinet on an existing roof

Amend permit # com2005-23704 issued 8/10/05 to extend permit for 6 month

Amend permit # com2005-19785 issued on 8/2/05 w/ plan # 936 to add low voltage contractor as listed

Amend permit#com2004-128 issued on 7-7-04 w/plans#2004-699 to name prime and electrical contractors as stated above.

Maintenance upgrade- replacement of 9 antennas with 6 antennas on a existing rooftop and install one equiment cabinet on an existing rooftop equipment plat form

Request for time extension on permit# com2004-128 issue date 7/7/04 with completion date of 1/7/05 to extend to 11/5/05.

Amend permit#com2004-095 issued on 5-12-04 w/plans#2004-217 to name prime contractor as stated above

Temporary construction 2 amp service

Construct unmaned equipement bldg. 12 x x 11 install antenna sled mounted on roof of the existing bldg per plans. Per bmza 366-01. An amended permit must be obtain stating name of lic. Contractors before any work can be started.

Amend permit # com2002-00432 issued 6/11/02 with plans # 432 to name electrical contractor

Request for time extension on permit #com2008-21792 issued on 09/30/08 with original completion date of 03/30/09 and amend to add prime contractor as listed above. Original permit description:(com2008-21792)install new dish antennas on existing tower as per plans as per code.

Install one transport dish on an existing at&t antenna mount and a 3/8" dia coax cable from the existing at&t equipment to the transport dish as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required.

For each of the three antenna sector: replace (1)(e) 19 with (1)(n) 19 antenna b. Replace (1)(e) 19 with (1)(n) 21 antennac. Mount (1)(n) sector box and (1)(n) remote radio head on existing framed. Run (1)(n) hybrid cable from shelter distribution box to sector boxe. Modify ice bridge to accommodate new hybrid cable. If installing suppression system in equipment cabinet then a separate permit is required.

Preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated to be array on our building #8 and associated equipment preperation to include refurbishing a portion of roof on building #8 cutting installation holes in roof of building #9 as per plans as per code. Seperate permit will be required for sprinkler system and fire alaram.

Amend permit com2011-08563 issued on 05/10/11 with plans #2011-571 to add prime contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated to be array on our building #8 and associated equipment preperation to include refurbishing a portion of roof on building #8 cutting installation holes in roof of building #9 as per plans as per code. Seperate permit will be required for sprinkler system and fire alaram.

Amend permit # com2011-08563 issued on 05-10-11 with plans # 2011-571 to add electrical contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated to be array on our building #8 and associated equipment preperation to include refurbishing a portion of roof on building #8 cutting installation holes in roof of building #9 as per plans as per code. Seperate permit will be required for sprinkler system and fire alaram.

Amend permit #com2011-08563 issued on 05/10/11 with plans #2011-571 to add hvac contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated to be array on our building #8 and associated equipment preperation to include refurbishing a portion of roof on building #8 cutting installation holes in roof of building #9 as per plans as per code. Seperate permit will be required for sprinkler system and fire alaram.

Non-structural alterations/exterior work;remove and replace existing antennas on existing structure; antenna will be located at same rad center as existing; retrofit existing and add equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Original permit description:(com2012-09546)non-structural alterations/exterior work;remove and replace existing antennas on existing structure; antenna will be located at same rad center as existing; retrofit existing and add equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Original permit description:(com2012-23913)replacing (3) obsolete antennas with new model type. Replacing (3)transceivers located at the base to the backside of new antennas as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Exterior work: for each of the three antenna sector. Replace (1) (e) 19 with (1) (n) 19 antennab. Replace (1) (e) 19 with (1) (n) 21 antenna c. Mount (1) (n) sector box and (1) (n) remote radio head on existing frame d. Run (1) (n) hybrid cable from shelter distribution box e. Modify ice bridge to accomodate new hybrid cable. If installing suppression system in equipment cabinet then a separate permit is required this work was previously approved under plans # 2013-606 permit# com2013-07586 as per code

Repair 2" galvanize water line as per code

Install 6 new antennas on the existing rooftop sled mounted on existing bldg.

Antennas on the roof of an existing multi-story industrial building. Six (6) antennas are to to be sled mounted on the roof of the structure and three(3) antennas are to be pole mounted off of the elvator penthouse. Also construct an unmanned 1- x steel platform which will be used to support 3 modular radio cabinets and others electronic equipment. Approved - bmza code no.: 221-04 may 25 2004 w/conditions.

Reinstate permit # com2005-19785 for thirty (30) days for final inspection. Original permit description:(com2005-19785)maintenance upgrade- replacement of 9 antennas with 6 antennas on a existing rooftop and install one equiment cabinet on an existing rooftop equipment plat form

Reinstate permit com2005-19785 for thirty days for final inspectionoriginal permit description:(com2005-19785)maintenance upgrade- replacement of 9 antennas with 6 antennas on a existing rooftop and install one equiment cabinet on an existing rooftop equipment plat form

Install six 6 new panel antennas two (2) new antenna sleds will also be installed on this existing building rooftop telecom installation as per plans as per code.

Remove and replace 15 antennas and remove and replace 6 remote radio head (rrh) (no ground work) as per plans as per code.

Install six 6 new panel antennas two (2) new antenna sleds will also be installed on this existing building rooftop telecom installation as per plans as per code. Previously approvaed under com2016-18404 (plans #2016-1621) issued 11 07 16

Amend permit # com2002-00432 issued 6 11 02 with plans # 432 to name electrical contractor

Install one transport dish on an existing at&t antenna mount and a 3 8" dia coax cable from the existing at&t equipment to the transport dish as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required.

Request for time extension on permit #com2008-21792 issued on 09 30 08 with original completion date of 03 30 09 and amend to add prime contractor as listed above. Original permit description:(com2008-21792)install new dish antennas on existing tower as per plans as per code.

Request for time extension on permit# com2004-128 issue date 7 7 04 with completion date of 1 7 05 to extend to 11 5 05.

Amend permit#com2004-128 issued on 7-7-04 w plans#2004-699 to name prime and electrical contractors as stated above.

Amend permit # com2005-19785 issued on 8 2 05 w plan # 936 to add low voltage contractor as listed

Amend permit # com2005-23704 issued 8 10 05 to extend permit for 6 month

Amend permit #com2011-08563 issued on 05 10 11 with plans #2011-571 to add hvac contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated to be array on our building #8 and associated equipment preperation to include refurbishing a portion of roof on building #8 cutting installation holes in roof of building #9 as per plans as per code. Seperate permit will be required for sprinkler system and fire alaram.

Non-structural alterations exterior work;remove and replace existing antennas on existing structure; antenna will be located at same rad center as existing; retrofit existing and add equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Original permit description:(com2012-09546)non-structural alterations exterior work;remove and replace existing antennas on existing structure; antenna will be located at same rad center as existing; retrofit existing and add equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Amend permit com2011-08563 issued on 05 10 11 with plans #2011-571 to add prime contractor as listed above. Original permit description:(com2011-08563)preperation for & installation of solar panels on the roof of our building #9 and a solar evacuated to be array on our building #8 and associated equipment preperation to include refurbishing a portion of roof on building #8 cutting installation holes in roof of building #9 as per plans as per code. Seperate permit will be required for sprinkler system and fire alaram.

Antennas on the roof of an existing multi-story industrial building. Six (6) antennas are to to be sled mounted on the roof of the structure and three(3) antennas are to be pole mounted off of the elvator penthouse. Also construct an unmanned 1- x steel platform which will be used to support 3 modular radio cabinets and others electronic equipment. Approved - bmza code no.: 221-04 may 25 2004 w conditions.

Amend permit#com2004-095 issued on 5-12-04 w plans#2004-217 to name prime contractor as stated above