Use as a single family dwelling

Install a complete hvac system with the following equipment excludes electric and gas piping. Ml193uh070xp36b- lennox 0 btu gas furnace. 13acx030-230-lennox 2. 5 ton a/c unitc33-25b-2f- lennox coil asper code..

Wire new townhouse and 25 ckts with 3 phone and 3 cable - 2 amp service as per code.

Exterior work: remove formstone / clean and repoint existing brick as per code separate permit required for dgs

Drains vents and water piping. Gas piping per code. Dual check valve. Install 14 plumbing fixtures as per code. Gas fixtures btus furnace 91k stove 47k. Hvac by others. All work done as per code.

Interior demolition category 1/structural alterations/interior work 1 213 sq. Ft. - non-structural alterations/demo and removal of plaster drywall windows doors non-bearing walls roofing and floor material and removal of debris and equipment. New in

Interior demolition category ii/structure alterations/interior work 293 sq. Ft. - underpinning of foundation walls as per attached engineers plans and certification. The engineer certification is required at completion of work and with a report of the ex

Interior demolition category 1/structural alterations/interior work 1 213 sq. Ft. - non-structural alterations/demo and removal of plaster drywall windows doors non-bearing walls roofing and floor material and removal of debris and equipment. New interior framing and drywall (2 x 4 studs @ 16" o. C.) for first second floor and basement. New 3 wide interior stairs (7. 75" max risers and 10" min. Treads) and hangers. New floor finishing new interior doors (13). New insulation (r-21 for walls and r-49 for roof)replace 4" concrete slab (12-0" x 28-2") in basement at current grade. Exterior work - first floor addition (22-0" x 3-0") second floor addition (12-0" x 22-0") rooftop deck (12-0" x 16-0"). New exterior doors (3) new windows (7) new sidings and new rubber roof over existing roof. Existing windows and doors same sizes and locations as per drawing as per code.

Interior demolition category ii/structure alterations/interior work 293 sq. Ft. - underpinning of foundation walls as per attached engineers plans and certification. The engineer certification is required at completion of work and with a report of the exact dates of periodic inspections during the construction existing basement height 6 new height 8 new 4" concrete slab 3 gravel in basement as per code as per sketch. Excavation and placement of concrete must be done under the direction of a structural engineer as indicated on the cerfication of the work filed with the approved plans. Engineers certification containing inspection dates and approvals must be filed with the building official with days of the completion of this work as per sketch as per code.

Interior demolition category 1 structural alterations interior work 1 213 sq. Ft. - non-structural alterations demo and removal of plaster drywall windows doors non-bearing walls roofing and floor material and removal of debris and equipment. New interior framing and drywall (2 x 4 studs @ 16" o. C.) for first second floor and basement. New 3 wide interior stairs (7. 75" max risers and 10" min. Treads) and hangers. New floor finishing new interior doors (13). New insulation (r-21 for walls and r-49 for roof)replace 4" concrete slab (12-0" x 28-2") in basement at current grade. Exterior work - first floor addition (22-0" x 3-0") second floor addition (12-0" x 22-0") rooftop deck (12-0" x 16-0"). New exterior doors (3) new windows (7) new sidings and new rubber roof over existing roof. Existing windows and doors same sizes and locations as per drawing as per code.

Interior demolition category ii structure alterations interior work 293 sq. Ft. - underpinning of foundation walls as per attached engineers plans and certification. The engineer certification is required at completion of work and with a report of the exact dates of periodic inspections during the construction existing basement height 6 new height 8 new 4" concrete slab 3 gravel in basement as per code as per sketch. Excavation and placement of concrete must be done under the direction of a structural engineer as indicated on the cerfication of the work filed with the approved plans. Engineers certification containing inspection dates and approvals must be filed with the building official with days of the completion of this work as per sketch as per code.

Exterior work: remove formstone clean and repoint existing brick as per code separate permit required for dgs

Install a complete hvac system with the following equipment excludes electric and gas piping. Ml193uh070xp36b- lennox 0 btu gas furnace. 13acx030-230-lennox 2. 5 ton a c unitc33-25b-2f- lennox coil asper code..