Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Add (3) antennas. Swap (1) amp breaker with (1) amp breaker as per plans as per code Permit id: Com2014-43995 | |||||
Install 1 - new amp circuit and breaker as per code. Permit id: Com2015-02152 | |||||
Replacing (3) obsolete antennas with new model type. Replacing (3) obsolete transceivers located at the base to the backside of the new antennas. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit wi Permit id: Com2012-24386 | |||||
Exterior work - non-structural alterations - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. (1) new equipment cabinet at existing location as per plans as per code. If installing suppres Permit id: Com2012-11366 | |||||
Exterior work - non-structural alterations - upgrade equipment cabinet in shelter. Remove/replace 3 antennas on tower. Remove 3 antennas on tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is requi Permit id: Com2012-10951 | |||||
Non-structural alterations -adding (3) antennas on existing lattice tower and placing an equipment cabinet and power panel on a 4x12 grated platform within the existing fenced compound as per bmz2012-00056 approved on 03/20/12. As per code/plans. If ins Permit id: Com2012-07190 | |||||
1 dish antenna on existing tower with related cables and equipment as per plans and code. If installing suppression system in equipment cabinets then a separate permit is required. Permit id: Com2009-26008 | |||||
Install (3) dish antennas on existing tower as per plans/as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Permit id: Com2009-10741 | |||||
Amend permit#com2008-32113 issued on 12-22-08 with plans#2008-16 to add contractors aslisted above. Original permit description:(com2008-32113)install (4) omni antennas and one microwave antenna on existing tower. Install equipment cabinets inside existi Permit id: Com2009-12703 | |||||
Amend permit com2008-32113 issued on 12/22/08 with plans #2008-16 to add prime contractor as listed above. Original permit description:(com2008-32113)install (4) omni antennas and one microwave antenna on existing tower. Install equipment cabinets insi Permit id: Com2009-03139 | |||||
Install (4) omni antennas and one microwave antenna on existing tower. Install equipment cabinets inside existing building one proposed generator to 5x7 concrete pad. Proposed antenna signal and grounding cables as per code and plans. Per bmza 815-08 ap Permit id: Com2008-32113 | |||||
Install one equipment cabinet on existing concrete pad as per code. Per bmza 440-02 amended 5/13/08per bmza 440-02 amended 5/13/08. Permit id: Com2008-15042 | |||||
Remove & replace 6 pcs antennas add 1 total. Communiction cabinet 2-30a2 volt circuits extend tele communication conduit. Upgrade to existing site as per plans as per code. Permit id: Com2007-36250 | |||||
Amend permit com2006-26955 issued on 10/13/06 with plans #2006-1451 to add contractor(s) as listed above. Original permit description:(com2006-26955)co-location of an unmanned radio telecommunication facility consisting of a existing 507 ft self suport to Permit id: Com2006-35210 | |||||
Co-location of an unmanned radio telecommunication facility consisting of a existing 507 ft self suport tower w/a new nextel prefabricated 12x equipment shelter and a 6x concrete pad for a generator location at the base of the tower as per plan as per Permit id: Com2006-26955 | |||||
Amend permit com2008-32113 issued on 12/22/08 with plans #2008-16 to add prime contractor as listed above. Original permit description:(com2008-32113)install (4) omni antennas and one microwave antenna on existing tower. Install equipment cabinets inside existing building one proposed generator to 5x7 concrete pad. Proposed antenna signal and grounding cables as per code and plans. Per bmza 815-08 approval. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: December 22, 2009 | Permit id: Com2009-03139 | |||||
Amend permit#com2008-32113 issued on 12-22-08 with plans#2008-16 to add contractors aslisted above. Original permit description:(com2008-32113)install (4) omni antennas and one microwave antenna on existing tower. Install equipment cabinets inside existing building one proposed generator to 5x7 concrete pad. Proposed antenna signal and grounding cables as per code and plans. Per bmza 815-08 approval. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: December 22, 2009 | Permit id: Com2009-12703 | |||||
Install (4) omni antennas and one microwave antenna on existing tower. Install equipment cabinets inside existing building one proposed generator to 5x7 concrete pad. Proposed antenna signal and grounding cables as per code and plans. Per bmza 815-08 approval. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: December 22, 2009 | Permit id: Com2008-32113 | |||||
Replacing (3) obsolete antennas with new model type. Replacing (3) obsolete transceivers located at the base to the backside of the new antennas. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit will be required. Expiration date: August 7, 2013 | Permit id: Com2012-24386 | |||||
Non-structural alterations -adding (3) antennas on existing lattice tower and placing an equipment cabinet and power panel on a 4x12 grated platform within the existing fenced compound as per bmz2012-00056 approved on 03/20/12. As per code/plans. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: May 1, 2013 | Permit id: Com2012-07190 | |||||
Exterior work - non-structural alterations - upgrade equipment cabinet in shelter. Remove/replace 3 antennas on tower. Remove 3 antennas on tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Expiration date: June 11, 2013 | Permit id: Com2012-10951 | |||||
Exterior work - non-structural alterations - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. (1) new equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: June 13, 2013 | Permit id: Com2012-11366 | |||||
Construct ( x 20) concrete pad with equipment cabinets and install (9) antennas on existing tower per plans. Bmza 440-02october 15 2002 Expiration date: June 12, 2003 | Permit id: Com2002-13956 | |||||
Amend permit 2002-13956 to name electrical cont Expiration date: June 12, 2003 | Permit id: Com2002-16938 | |||||
A temp const permit shall be valid for 6 months2 amp 1 circuit Expiration date: June 3, 2003 | Permit id: Com2002-16941 | |||||
Amend permit no. Com2002-13956 with new prime contractor as shown above berliner in place of network towers llc. Expiration date: June 10, 2003 | Permit id: Com2002-17384 | |||||
Re-inspection fee Expiration date: November 22, 2003 | Permit id: Com2003-28348 | |||||
Reinstate 2002-13956 for final inspection on electrical permit com2002-16938 Expiration date: July 8, 2004 | Permit id: Com2004-13729 | |||||
Co-location of an unmanned radio telecommunication facility consisting of a existing 507 ft self suport tower w/a new nextel prefabricated 12x equipment shelter and a 6x concrete pad for a generator location at the base of the tower as per plan as per code. Expiration date: April 13, 2007 | Permit id: Com2006-26955 | |||||
Amend permit com2006-26955 issued on 10/13/06 with plans #2006-1451 to add contractor(s) as listed above. Original permit description:(com2006-26955)co-location of an unmanned radio telecommunication facility consisting of a existing 507 ft self suport tower w/a new nextel prefabricated 12x equipment shelter and a 6x concrete pad for a generator location at the base of the tower as per plan as per code. Expiration date: April 13, 2007 | Permit id: Com2006-35210 | |||||
Install (6) new antennas install (3) new antenna mounts and remove (3) existing antennas also upgrade the main ac breaker as per plans as per code. If installing suppression system in equipment cabinet then separate permit will be required. Expiration date: June 19, 2017 | Permit id: Com2016-25831 | |||||
Install (1) # low voltage as per code. Expiration date: October 21, 2017 | Permit id: Com2017-53149 | |||||
Installing (1) proposed antenna and (1) proposed 6x12 hybrid cable to an existing wireless telecommunications facility roof top installation no ground work as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Expiration date: December 7, 2017 | Permit id: Com2017-08315 | |||||
Installing one generator and 1 gallon propane tank in the existing compound as per plans as per code. Expiration date: August 1, 2017 | Permit id: Com2016-27176 | |||||
48 vdc 7. 5 kw lp gas dc generator to be connected to existing t-mobile rbs ssc cabinet as per code. Gas by others Expiration date: August 10, 2017 | Permit id: Com2017-03467 | |||||
Extend original permit.(original permit:com2017-08315:installing (1) proposed antenna and (1) proposed 6x12 hybrid cable to an existing wireless telecommunications facility roof top installation no ground work as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2017-08315)installing (1) proposed antenna and (1) proposed 6x12 hybrid cable to an existing wireless telecommunications facility roof top installation no ground work as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Expiration date: June 7, 2018 | Permit id: Com2017-64047 | |||||
Install one equipment cabinet on existing concrete pad as per code. Per bmza 440-02 amended 5 13 08per bmza 440-02 amended 5 13 08. Expiration date: January 23, 2009 | Permit id: Com2008-15042 | |||||
Amend permit com2008-32113 issued on 12 22 08 with plans #2008-16 to add prime contractor as listed above. Original permit description:(com2008-32113)install (4) omni antennas and one microwave antenna on existing tower. Install equipment cabinets inside existing building one proposed generator to 5x7 concrete pad. Proposed antenna signal and grounding cables as per code and plans. Per bmza 815-08 approval. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: December 22, 2009 | Permit id: Com2009-03139 | |||||
Co-location of an unmanned radio telecommunication facility consisting of a existing 507 ft self suport tower w a new nextel prefabricated 12x equipment shelter and a 6x concrete pad for a generator location at the base of the tower as per plan as per code. Expiration date: April 13, 2007 | Permit id: Com2006-26955 | |||||
Amend permit com2006-26955 issued on 10 13 06 with plans #2006-1451 to add contractor(s) as listed above. Original permit description:(com2006-26955)co-location of an unmanned radio telecommunication facility consisting of a existing 507 ft self suport tower w a new nextel prefabricated 12x equipment shelter and a 6x concrete pad for a generator location at the base of the tower as per plan as per code. Expiration date: April 13, 2007 | Permit id: Com2006-35210 | |||||
Non-structural alterations -adding (3) antennas on existing lattice tower and placing an equipment cabinet and power panel on a 4x12 grated platform within the existing fenced compound as per bmz2012-00056 approved on 03 20 12. As per code plans. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: May 1, 2013 | Permit id: Com2012-07190 | |||||
Exterior work - non-structural alterations - upgrade equipment cabinet in shelter. Remove replace 3 antennas on tower. Remove 3 antennas on tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Expiration date: June 11, 2013 | Permit id: Com2012-10951 | |||||
Install (3) dish antennas on existing tower as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: January 2, 2010 | Permit id: Com2009-10741 |