Install one (1) new panel antenna and remove three (3) existing panel antennas on the existing tower. Replace an existing equipment cabinet with a new equipment cabinet on the existing building rooftop. Install one (1) new vsat dish antenna with gps anten

Amend permit#com2012-19212 10-25-12 w/completion date of 10-25-2013 to extend for 6 months also amend to name contractor. Original permit description:(com2012-19212)replace (6) existing antennas with (6) new antennas; decommission (1) existing cabinet and

Replacing (3) obsolete antennas with new model type. Replacing (3)obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression system in equipment cabinet then a separate

Replace (6) existing antennas with (6) new antennas; decommission (1) existing cabinet and retrofit (1) existing cabinet. All work to be completed as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is r

Add (1) whip antenna to existing tower. Add (1) equipment cabinet in existing compound. Per bmza 2011-527 approved 12/20/2011. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Install 6 panel antennas and 2 microwave dishes to existing tower and add 1 equipment cabinet inside of existing equipment building. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Per b

Install 1 new 100-amp service/meter for cell tower equipment (120/240v) as per code.

Amend permit#com2008-21437 issued on 4/23/09 to add the following additional work: 3 additional antennas to existing permit as per plans & as per code; and request for time extensions on permit#com2009-09304 issued on 4/23/09 with original completion da

Request for time extension on permit com2008-24666 issued on 10/31/08 with original completion date of 5/1/09 original permit description:(com2008-24666)install 5 high antennas on existing 325 high tower new equipment to be installed inside existing sh

Amend permit com2009-07017 issued on 4/20/09 with plans 373 to add contractor as per codeoriginal permit description:(com2009-07017)adding 4 antennas to existing lattice tower and placing equipment on platform within existing fence compound per bmza 09-14

Amend permit#com2008-21437 w/plans#2008-1099 issued on 3-23-09 to extend for 6 monthsoriginal permit description:(com2008-21437)install 5 new dish antennas on existing self support tower no ground work as per plans as per code.

Adding 4 antennas to existing lattice tower and placing equipment on platform within existing fence compound per bmza 09-146 approved 3/31/09. Work done per code and plans. If installing suppression system in equipment cabinet(s) then a separate permit w

Amend permit com2008-24666 issued on 10/31/08 with plans 2008-1271 to add electrical (low voltage) contractor as listed above. Original permit description:(com2008-24666)install 5 high antennas on existing 325 high tower new equipment to be installed i

Install 5 high antennas on existing 325 high tower new equipment to be installed inside existing shelter as per plans as per code.

Install 5 new dish antennas on existing self support tower no ground work as per plans as per code.

Request for time extension on permit#com2006-30354 issued on 10-3-06 with original completion date of 4-3-07. Original permit description:(com2006-30354)o/k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with

Request for time extension on permit #com2006-30354 issued on 10/3/2006 with original completion date of 4/3/07. Original permit description:(com2006-30354)o/k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna wi

O/k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with new jampro (jadp-ifm) single layer 3 sectoin antenna. The antenna is located on the existing tower at 3 ft level. The new antennas weight and wind

"the installation of (2) microwave radio antennas 24"" square flat panel antenna @ app. 325 feet elevation on northeast tower leg; 30"" diameter parabulic antenna @ feet elevation on south facing tower leg as per code and plans. Approved per bmza# 538-06"

Request for time extension on permit com2008-24666 issued on 10/31/08 with original completion date of 5/1/09 original permit description:(com2008-24666)install 5 high antennas on existing 325 high tower new equipment to be installed inside existing shelter as per plans as per code.

Amend permit com2008-24666 issued on 10/31/08 with plans 2008-1271 to add electrical (low voltage) contractor as listed above. Original permit description:(com2008-24666)install 5 high antennas on existing 325 high tower new equipment to be installed inside existing shelter as per plans as per code.

Amend permit com2009-07017 issued on 4/20/09 with plans 373 to add contractor as per codeoriginal permit description:(com2009-07017)adding 4 antennas to existing lattice tower and placing equipment on platform within existing fence compound per bmza 09-146 approved 3/31/09. Work done per code and plans. If installing suppression system in equipment cabinet(s) then a separate permit will be required.

Amend permit#com2008-21437 issued on 4/23/09 to add the following additional work: 3 additional antennas to existing permit as per plans & as per code; and request for time extensions on permit#com2009-09304 issued on 4/23/09 with original completion date of 10/23/09.

Adding 4 antennas to existing lattice tower and placing equipment on platform within existing fence compound per bmza 09-146 approved 3/31/09. Work done per code and plans. If installing suppression system in equipment cabinet(s) then a separate permit will be required.

Install 6 panel antennas and 2 microwave dishes to existing tower and add 1 equipment cabinet inside of existing equipment building. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Per bmza 2011-34 approved on 3-11-11.

Replace (6) existing antennas with (6) new antennas; decommission (1) existing cabinet and retrofit (1) existing cabinet. All work to be completed as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Replacing (3) obsolete antennas with new model type. Replacing (3)obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Request for time extension on permit #com2006-30354 issued on 10/3/2006 with original completion date of 4/3/07. Original permit description:(com2006-30354)o/k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with new jampro (jadp-ifm) single layer 3 sectoin antenna. The antenna is located on the existing tower at 3 ft level. The new antennas weight and wind loading is less than the antenna being replaced. The removal and installation will be handled by a professional tower crew as per code.

Request for time extension on permit#com2006-30354 issued on 10-3-06 with original completion date of 4-3-07. Original permit description:(com2006-30354)o/k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with new jampro (jadp-ifm) single layer 3 sectoin antenna. The antenna is located on the existing tower at 3 ft level. The new antennas weight and wind loading is less than the antenna being replaced. The removal and installation will be handled by a professional tower crew as per code.

Amend permit#com2012-19212 10-25-12 w/completion date of 10-25-2013 to extend for 6 months also amend to name contractor. Original permit description:(com2012-19212)replace (6) existing antennas with (6) new antennas; decommission (1) existing cabinet and retrofit (1) existing cabinet. All work to be completed as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Install one (1) new panel antenna and remove three (3) existing panel antennas on the existing tower. Replace an existing equipment cabinet with a new equipment cabinet on the existing building rooftop. Install one (1) new vsat dish antenna with gps antenna on the existing building rooftop. (one (1) existing rx dish antenna to remain). If installing suppression system in equipment cabinet then separate permit is required. As per plans and as per code.

Remove three antennas and install six antennas and six rrus to existing wireless telecommunications facility upgrade service conductor size from meter to disconnect and from disconnect to t-mobile ac panel and replacing main breaker to 100amp as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Original permit description:(com2014-10136)install one (1) new panel antenna and remove three (3) existing panel antennas on the existing tower. Replace an existing equipment cabinet with a new equipment cabinet on the existing building rooftop. Install one (1) new vsat dish antenna with gps antenna on the existing building rooftop. (one (1) existing rx dish antenna to remain). If installing suppression system in equipment cabinet then separate permit is required. As per plans and as per code.

Install one new panel antenna and remove three existing antennas on the existing tower replace an existing equipment cabinet with a new equipment cabinet on the existing building rooftop. Install one new v-sat dish antenna with gps antenna on the existing rooftop. As per code.

Relocate the antenna platform from 2 agl to 1 agl on existing tower as per plan per bmza 268-95x. An amended permit must be obtain stating name of contractor before any work can be started.

The installation of (2) microwave radio antennas 24" square flat panel antenna @ app. 325 feet elevation on northeast tower leg; 30" diameter parabulic antenna @ feet elevation on south facing tower leg as per code and plans. Approved per bmza# 538-06 on 6/28/06.

O/k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with new jampro (jadp-ifm) single layer 3 sectoin antenna. The antenna is located on the existing tower at 3 ft level. The new antennas weight and wind loading is less than the antenna being replaced. The removal and installation will be handled by a professional tower crew as per code.

Structural modifications to existing tower as per plans as per code.

Install (1) 80kw diesel generator on a new 8 x concrete pad inside existing fenced compound as per plans as per code.

Amend permit: add contractor.(original permit:com2017-09092:install (1) 80kw diesel generator on a new 8 x concrete pad inside existing fenced compound as per plans as per code.)original permit description:(com2017-09092)install (1) 80kw diesel generator on a new 8 x concrete pad inside existing fenced compound as per plans as per code.

Amend permit: add electrical contractor .(original permit:com2017-09092:install (1) 80kw diesel generator on a new 8 x concrete pad inside existing fenced compound as per plans as per code.)original permit description:(com2017-09092)install (1) 80kw diesel generator on a new 8 x concrete pad inside existing fenced compound as per plans as per code.

Request for time extension on permit #com2006-30354 issued on 10 3 2006 with original completion date of 4 3 07. Original permit description:(com2006-30354)o k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with new jampro (jadp-ifm) single layer 3 sectoin antenna. The antenna is located on the existing tower at 3 ft level. The new antennas weight and wind loading is less than the antenna being replaced. The removal and installation will be handled by a professional tower crew as per code.

Request for time extension on permit#com2006-30354 issued on 10-3-06 with original completion date of 4-3-07. Original permit description:(com2006-30354)o k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with new jampro (jadp-ifm) single layer 3 sectoin antenna. The antenna is located on the existing tower at 3 ft level. The new antennas weight and wind loading is less than the antenna being replaced. The removal and installation will be handled by a professional tower crew as per code.

Adding 4 antennas to existing lattice tower and placing equipment on platform within existing fence compound per bmza 09-146 approved 3 31 09. Work done per code and plans. If installing suppression system in equipment cabinet(s) then a separate permit will be required.

Amend permit com2008-24666 issued on 10 31 08 with plans 2008-1271 to add electrical (low voltage) contractor as listed above. Original permit description:(com2008-24666)install 5 high antennas on existing 325 high tower new equipment to be installed inside existing shelter as per plans as per code.

Amend permit#com2008-21437 w plans#2008-1099 issued on 3-23-09 to extend for 6 monthsoriginal permit description:(com2008-21437)install 5 new dish antennas on existing self support tower no ground work as per plans as per code.

The installation of (2) microwave radio antennas 24" square flat panel antenna @ app. 325 feet elevation on northeast tower leg; 30" diameter parabulic antenna @ feet elevation on south facing tower leg as per code and plans. Approved per bmza# 538-06 on 6 28 06.

O k per bmza 538-06- replacing current damaged jampro (jsdp-1-fm) single layer 3 section antenna with new jampro (jadp-ifm) single layer 3 sectoin antenna. The antenna is located on the existing tower at 3 ft level. The new antennas weight and wind loading is less than the antenna being replaced. The removal and installation will be handled by a professional tower crew as per code.

Amend permit com2009-07017 issued on 4 20 09 with plans 373 to add contractor as per codeoriginal permit description:(com2009-07017)adding 4 antennas to existing lattice tower and placing equipment on platform within existing fence compound per bmza 09-146 approved 3 31 09. Work done per code and plans. If installing suppression system in equipment cabinet(s) then a separate permit will be required.

Request for time extension on permit com2008-24666 issued on 10 31 08 with original completion date of 5 1 09 original permit description:(com2008-24666)install 5 high antennas on existing 325 high tower new equipment to be installed inside existing shelter as per plans as per code.

Add (1) whip antenna to existing tower. Add (1) equipment cabinet in existing compound. Per bmza 2011-527 approved 12 20 2011. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Install 1 new 100-amp service meter for cell tower equipment (120 240v) as per code.

Amend permit#com2008-21437 issued on 4 23 09 to add the following additional work: 3 additional antennas to existing permit as per plans & as per code; and request for time extensions on permit#com2009-09304 issued on 4 23 09 with original completion date of 10 23 09.

Amend permit#com2012-19212 10-25-12 w completion date of 10-25-2013 to extend for 6 months also amend to name contractor. Original permit description:(com2012-19212)replace (6) existing antennas with (6) new antennas; decommission (1) existing cabinet and retrofit (1) existing cabinet. All work to be completed as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.