Replace 3 radio antennas with new panel radio antennas. Work done to code. Per planning (awc

Remove 3 existing antennas and install 3 new lte antennas in thier positions installing related ancillary equipment as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Exterior work; run 1 pvc 1-1/2 underground; mount controller on small concrete pad as per plans as per code.

Amend permit#com2010-26674 issued on 12-8- w/plans#2010-1588 to add the electrical contractor as stated aboveoriginal permit description:(com2010-26674)electrical service upgrade installation of automatic transfer switch as per plans as per code.

Add 3 antennas to existing tower - install equipment cabinet on existing concrete pad as per plans as per code.

Electrical service upgrade installation of automatic transfer switch as per plans as per code.

Exterior work/new construction/structural alterations - installation of new vapor recovery unit (vru) for motiva enterprises baltimore east terminal 24 petrolia ave. Baltimore md 21226 (this is a replacement for an existing unit) as per plans as per

Request for time extension on permit#com2009-00331 issued on 2-27-09 with original completion date of 8-27-09. Original permit description:(com2009-00331)upgrade existing electrical rack to outdoor motor control center/mcc to be mounted on steel platform.

Request for time extension on permit #com2008-31544 issued on 12-3-08 with original completion dateof 6-3-09. Original permit description:(com2008-31544)take out old disconnects panels and starter boxes and replace with new allen bradly switch gear in it

Request for time extension on permit#com2008-14004 issued on 12-18-08 with original completion date of 3-4-09amend permit#com2008-14004 issued on 9-4-08 with plans #2008-715 to add contractor aslisted above. Original permit description:(com2008-32212)amend

Upgrade existing electrical rack to outdoor motor control center/mcc to be mounted on steel platform. Platform to be set on foundation as per plans as per code

Amend permit com2008-14004 issued on 09/04/08 with plans #2008-715 to add the following additional work: change size and location of tank as per plans as per code. Original permit description:(com2008-14004)install an 84 0 gal butane tank with shed con

Take out old disconnects panels and starter boxes and replace with new allen bradly switch gear in its place. Changing 800amp main with new 8 amp main. All equipment is outdoors in industrial facility. In the same place.

Install an 84 0 gal butane tank with shed containing process equipment to blend butane into the on-site gasoline with detailed drawings is to be constructed. As per code and plans. 008-7151) tank shall comply with ifc 2006. Set back shall be 100. Submi

Attach three panel antennas to an existing tower (under construction)and place an equipment cabinet on concrete slab at the base of the tower as per plans. An amended permit must be obtain stating name of contractors before any work can be started.

Exterior work/new construction/structural alterations - installation of new vapor recovery unit (vru) for motiva enterprises baltimore east terminal 24 petrolia ave. Baltimore md 21226 (this is a replacement for an existing unit) as per plans as per code.

Amend permit com2008-14004 issued on 09/04/08 with plans #2008-715 to add the following additional work: change size and location of tank as per plans as per code. Original permit description:(com2008-14004)install an 84 0 gal butane tank with shed containing process equipment to blend butane into the on-site gasoline with detailed drawings is to be constructed. As per code and plans. 008-7151) tank shall comply with ifc 2006. Set back shall be 100. Submit new plot plan. 2) separate permit required from fire marshal office as to install tank and for commodity stored.

Install an 84 0 gal butane tank with shed containing process equipment to blend butane into the on-site gasoline with detailed drawings is to be constructed. As per code and plans. 008-7151) tank shall comply with ifc 2006. Set back shall be 100. Submit new plot plan. 2) separate permit required from fire marshal office as to install tank and for commodity stored.

Request for time extension on permit #com2008-31544 issued on 12-3-08 with original completion dateof 6-3-09. Original permit description:(com2008-31544)take out old disconnects panels and starter boxes and replace with new allen bradly switch gear in its place. Changing 800amp main with new 8 amp main. All equipment is outdoors in industrial facility. In the same place.

Request for time extension on permit#com2008-14004 issued on 12-18-08 with original completion date of 3-4-09amend permit#com2008-14004 issued on 9-4-08 with plans #2008-715 to add contractor aslisted above. Original permit description:(com2008-32212)amend permit com2008-14004 issued on 09/04/08 with plans #2008-715 to add the following additional work: change size and location of tank as per plans as per code. Original permit description:(com2008-14004)install an 84 0 gal butane tank with shed containing process equipment to blend butane into the on-site gasoline with detailed drawings is to be constructed. As per code and plans. 008-7151) tank shall comply with ifc 2006. Set back shall be 100. Submit new plot plan. 2) separate permit required from fire marshal office as to install tank and for commodity stored.

Request for time extension on permit#com2009-00331 issued on 2-27-09 with original completion date of 8-27-09. Original permit description:(com2009-00331)upgrade existing electrical rack to outdoor motor control center/mcc to be mounted on steel platform. Platform to be set on foundation as per plans as per code

Amend permit #171221 plans #200l-865 issued 1/3/02 to redesign tower per attached plans.

Amend permit no. Com2002-09207 to name contractor as c. And l. Contractors and license to complete the work.

Install a 6 month temporary elect for 6 amps and 1 ckt

Install 2 amp panel from eist 2 amp disconnect switch install 2 ckts

Install 7 x 17 x 6 concrete slab with mesh reinforcing

Upgrade existing electrical rack to outdoor motor control center mcc to be mounted on steel platform. Platform to be set on foundation as per plans as per code

Amend permit#com2010-26674 issued on 12-8- w plans#2010-1588 to add the electrical contractor as stated aboveoriginal permit description:(com2010-26674)electrical service upgrade installation of automatic transfer switch as per plans as per code.

Request for time extension on permit#com2008-14004 issued on 12-18-08 with original completion date of 3-4-09amend permit#com2008-14004 issued on 9-4-08 with plans #2008-715 to add contractor aslisted above. Original permit description:(com2008-32212)amend permit com2008-14004 issued on 09 04 08 with plans #2008-715 to add the following additional work: change size and location of tank as per plans as per code. Original permit description:(com2008-14004)install an 84 0 gal butane tank with shed containing process equipment to blend butane into the on-site gasoline with detailed drawings is to be constructed. As per code and plans. 008-7151) tank shall comply with ifc 2006. Set back shall be 100. Submit new plot plan. 2) separate permit required from fire marshal office as to install tank and for commodity stored.

Amend permit com2008-14004 issued on 09 04 08 with plans #2008-715 to add the following additional work: change size and location of tank as per plans as per code. Original permit description:(com2008-14004)install an 84 0 gal butane tank with shed containing process equipment to blend butane into the on-site gasoline with detailed drawings is to be constructed. As per code and plans. 008-7151) tank shall comply with ifc 2006. Set back shall be 100. Submit new plot plan. 2) separate permit required from fire marshal office as to install tank and for commodity stored.

Request for time extension on permit#com2009-00331 issued on 2-27-09 with original completion date of 8-27-09. Original permit description:(com2009-00331)upgrade existing electrical rack to outdoor motor control center mcc to be mounted on steel platform. Platform to be set on foundation as per plans as per code

Exterior work; run 1 pvc 1-1 2 underground; mount controller on small concrete pad as per plans as per code.

Exterior work new construction structural alterations - installation of new vapor recovery unit (vru) for motiva enterprises baltimore east terminal 24 petrolia ave. Baltimore md 21226 (this is a replacement for an existing unit) as per plans as per code.

Amend permit #171221 plans #200l-865 issued 1 3 02 to redesign tower per attached plans.