Original permit description:(com2014-30862)install panel antennas and related equipment on rooftop per bmza2014-297 approved 12 september 2014 w/conditions as per plans and as per code. If installing suppression system in equipment cabinet then separat

Use portion of premises 3 f as a recording studio

Add (3) antennas. Swap (1) amp breaker with (1) amp breaker as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Use as a apparel manufacturing

Install panel antennas and related equipment on rooftop per bmza2014-297 approved 12 september 2014 w/conditions as per plans and as per code. If installing suppression system in equipment cabinet then separate permit is required.

Replacing existing 2 amp service. Installing sub panel for 2nd floor north for 1 circuit as per code.

2nd floor north

O/k per bmza 2012-78 approved 4/17/2012exterior work/new construction - attach three (3) antennas as pipe mounts on building penthouse. Also construct a 8 x 12 platform to place one (1) base radio cabinet as per plans as per code. If installing suppres

Remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Keep equipement cabinet at existing location. As per plans as per code. If installing suppression system in equipment cabinet then a separa

Non-structural alterations; exterior work; install 3 new antennas remove 4 antennas and install 1 new equipment cabinet on rooftop as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Amend permit #com2010-04225 issued on 03/30/ without plans to add the following additional work: 4 amp service as per code. Original permit description:(com2010-04225)upgrade existing 2 amp service to 4 amp & 2 ckts & 1 kva transformer as per c

Upgrade existing 2 amp service to 4 amp & 2 ckts & 1 kva transformer as per code

Install (2) microwave dish antennas on existing rooftop cell site as per plans and as per code. If installing suppression system in equipment cabinets then a separate permit will be required.

8 points of protection; low voltage security as per code.

(use) portion of premises for admonistrative office for event planning and wedding decorations. Per bmza 593-08 approved 8/19/08.

Use portion of premises for production and storage of visual art

Use portion of premises suite 4c on the 4th floor as offices per bmza 593-08 approved 8/19/08

Use portion of premises for manufacturing of toner cartridge repairing laser sprinklers whole sale sale sales of office equipment and supplies

(use) the premises as production and storage of visual art

Replacing one gas furnace back to existing ductwork and installing or replacing one 5 ton out door condensing unit need new gas meter as per code. Electric provided by others

Install (6) panel antennas pipe mounted to existing penthouse and replace.

Amend permit# com2004-20791 date 9/3/04 with electrical contractor as listed above.

Installation of (9) telecommunication antennas with (4) related equipment cabinets on roof of existing building per bmza 04-350.

To amend permit # 186713 to name elec. Con. Issued on 5-23-2002

Install 2 amp service 1 phone line

Amend permit #com2010-04225 issued on 03/30/ without plans to add the following additional work: 4 amp service as per code. Original permit description:(com2010-04225)upgrade existing 2 amp service to 4 amp & 2 ckts & 1 kva transformer as per code

Remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Keep equipement cabinet at existing location. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit required.

O/k per bmza 2012-78 approved 4/17/2012exterior work/new construction - attach three (3) antennas as pipe mounts on building penthouse. Also construct a 8 x 12 platform to place one (1) base radio cabinet as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Original permit description:(com2014-30862)install panel antennas and related equipment on rooftop per bmza2014-297 approved 12 september 2014 w/conditions as per plans and as per code. If installing suppression system in equipment cabinet then separate permit is required.

Remove and replace 16 antennas on existing building plus necessary radio equipment replacement. As per plans/as per code. If installing suppression system in equipment cabinet then separate permit is required.

Add a 3 compartment sink with a grease interceptor add 1 hand sink. As per code.

(use) use portion of premises unit 4e (box 13) for the manufacturing of ice cream and processing of fermented fruit (wine).

Amend permit: add contractor .(original permit:com2016-07332:remove and replace 16 antennas on existing building plus necessary radio equipment replacement. As per plans/as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2016-07332)remove and replace 16 antennas on existing building plus necessary radio equipment replacement. As per plans/as per code. If installing suppression system in equipment cabinet then separate permit is required.

Install panel antennas and related equipment on rooftop per bmza2014-297 approved 12 september 2014 w conditions as per plans and as per code. If installing suppression system in equipment cabinet then separate permit is required.

Original permit description:(com2014-30862)install panel antennas and related equipment on rooftop per bmza2014-297 approved 12 september 2014 w conditions as per plans and as per code. If installing suppression system in equipment cabinet then separate permit is required.

Remove and replace 16 antennas on existing building plus necessary radio equipment replacement. As per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Addition of 3 remote radio heads to existing mounts as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Amend permit: add contractor .(original permit:com2016-07332:remove and replace 16 antennas on existing building plus necessary radio equipment replacement. As per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2016-07332)remove and replace 16 antennas on existing building plus necessary radio equipment replacement. As per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Amend permit: add prime contractor . Extend original permit.(original permit:com2016-10709:addition of 3 remote radio heads to existing mounts as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.)original permit description:(com2016-10709)addition of 3 remote radio heads to existing mounts as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Amend permit# com2004-20791 date 9 3 04 with electrical contractor as listed above.

Use portion of premises suite 4c on the 4th floor as offices per bmza 593-08 approved 8 19 08

(use) portion of premises for admonistrative office for event planning and wedding decorations. Per bmza 593-08 approved 8 19 08.

Amend permit #com2010-04225 issued on 03 30 without plans to add the following additional work: 4 amp service as per code. Original permit description:(com2010-04225)upgrade existing 2 amp service to 4 amp & 2 ckts & 1 kva transformer as per code

O k per bmza 2012-78 approved 4 17 2012exterior work new construction - attach three (3) antennas as pipe mounts on building penthouse. Also construct a 8 x 12 platform to place one (1) base radio cabinet as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.