Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Installation of fire alarm system (for an elevator upgrade) as per plans as per code. Permit id: Com2015-16005 | |||||
Add 3 antennas swap 1 amp breaker for 1 amp breaker as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Permit id: Com2014-17144 | |||||
Installing new 6 gas line from new bge regulator station to inside building welded main underground as per code Permit id: Com2013-27348 | |||||
Original permit description:(com2013-01646)replacing (3) obsolete antennas with new model type. Replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression Permit id: Com2013-22859 | |||||
Replacing (3) obsolete antennas with new model type. Replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression system in equipment cabinet then a separate Permit id: Com2013-01646 | |||||
Replace (1) existing cabinet with (1) new cabinet. Decommission (2) existing cabinets. Ground work only. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Permit id: Com2012-17500 | |||||
Remove and replace (3) panel antennas at this existing self-supported tower. As per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Permit id: Com2012-13348 | |||||
Request for time extension on permit#com2008-11864 issued on 6/11/09 with original completion date of 12/11/09original permit description:(com2009-11864)(5) backhaul dish antennas on existing tower with cables as per plans as per code. If installing supp Permit id: Com2010-00119 | |||||
(5) backhaul dish antennas on existing tower with cables as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Permit id: Com2009-11864 | |||||
Amend permit #com2007-13295 issued on 05/16/07 with plans # 2007-598 to add electrical contractor and change prime contractor as listed above. Original permit description:(com2007-13295)install (9) panel antennas at 181 on existing tower with 31 equipmen Permit id: Com2007-36488 | |||||
Amend permit#com2007-13295 issued on 5-16-07 w/completion date of 11-16-07 to extend for 6 monthsoriginal permit description:(com2007-13295)install (9) panel antennas at 181 on existing tower with 31 equipment cabinets for the furture on the ground insid Permit id: Com2007-28035 | |||||
Install (9) panel antennas at 181 on existing tower with 31 equipment cabinets for the furture on the ground inside existing fence compound at the base of tower. As per plans as per code. Per bmza 133-07 approved 2/20/07 Permit id: Com2007-13295 | |||||
Telecommunication wiriing Permit id: Com2005-33609 | |||||
Replace water line with 2 copper in ceiling of building. Permit id: Com2004-31972 | |||||
Request for time extension on permit#com2008-11864 issued on 6/11/09 with original completion date of 12/11/09original permit description:(com2009-11864)(5) backhaul dish antennas on existing tower with cables as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: July 5, 2010 | Permit id: Com2010-00119 | |||||
Replacing (3) obsolete antennas with new model type. Replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: November 14, 2013 | Permit id: Com2013-01646 | |||||
Amend permit#com2007-13295 issued on 5-16-07 w/completion date of 11-16-07 to extend for 6 monthsoriginal permit description:(com2007-13295)install (9) panel antennas at 181 on existing tower with 31 equipment cabinets for the furture on the ground inside existing fence compound at the base of tower. As per plans as per code. Per bmza 133-07 approved 2/20/07 Expiration date: May 16, 2008 | Permit id: Com2007-28035 | |||||
Amend permit #com2007-13295 issued on 05/16/07 with plans # 2007-598 to add electrical contractor and change prime contractor as listed above. Original permit description:(com2007-13295)install (9) panel antennas at 181 on existing tower with 31 equipment cabinets for the furture on the ground inside existing fence compound at the base of tower. As per plans as per code. Per bmza 133-07 approved 2/20/07 Expiration date: May 29, 2008 | Permit id: Com2007-36488 | |||||
Original permit description:(com2013-01646)replacing (3) obsolete antennas with new model type. Replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: May 14, 2014 | Permit id: Com2013-22859 | |||||
Remove and replace (3) panel antennas at existing self supported tower. If installing suppression system in equipment cabinet then a separate permit com2102-13348 issued on 8/30/12 Expiration date: September 17, 2016 | Permit id: Com2016-06555 | |||||
Install foundation and kw generatorinstall 4 amp automatic transfer switchinstall 2- amp circuits. One for heater jacket and one for battery charger. Expiration date: February 24, 2005 | Permit id: Com2004-19174 | |||||
Remove and replace (3) panel antennas at existing self supported tower. If installing suppression system in equipment cabinet then a separate permit com2102-13348 issued on 8 30 12 Expiration date: September 17, 2016 | Permit id: Com2016-06555 | |||||
Remove three antennas and add one new antenna to the existing tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Expiration date: November 30, 2017 | Permit id: Com2017-07516 | |||||
Install (9) panel antennas at 181 on existing tower with 31 equipment cabinets for the furture on the ground inside existing fence compound at the base of tower. As per plans as per code. Per bmza 133-07 approved 2 20 07 Expiration date: November 16, 2007 | Permit id: Com2007-13295 | |||||
Amend permit#com2007-13295 issued on 5-16-07 w completion date of 11-16-07 to extend for 6 monthsoriginal permit description:(com2007-13295)install (9) panel antennas at 181 on existing tower with 31 equipment cabinets for the furture on the ground inside existing fence compound at the base of tower. As per plans as per code. Per bmza 133-07 approved 2 20 07 Expiration date: May 16, 2008 | Permit id: Com2007-28035 | |||||
Amend permit #com2007-13295 issued on 05 16 07 with plans # 2007-598 to add electrical contractor and change prime contractor as listed above. Original permit description:(com2007-13295)install (9) panel antennas at 181 on existing tower with 31 equipment cabinets for the furture on the ground inside existing fence compound at the base of tower. As per plans as per code. Per bmza 133-07 approved 2 20 07 Expiration date: May 29, 2008 | Permit id: Com2007-36488 | |||||
Request for time extension on permit#com2008-11864 issued on 6 11 09 with original completion date of 12 11 09original permit description:(com2009-11864)(5) backhaul dish antennas on existing tower with cables as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: July 5, 2010 | Permit id: Com2010-00119 |