Content | Date | Cost | Contractor Rank | Address | Contractor |
---|---|---|---|---|---|
Add new natural gas piping to service future oven in manufacturing facility/ ties into existing piping & existing meter. 1. 5 million btu. Date: March 13, 2013 Value: $30,000 Applicant: Kevin Almon | Permit type: Mechanical plan review | Permit id: Mech-2013-01531 | Parcel: 8802000020 | |||||
Relocating blast booth from bldg 2 to bldg 6. Provide and install duct supports and bracing for existing ducting located on roof. 3 sq ft interior remodel. 1 sq ft exterior alteration. Reinstated permit b110136 Date: June 10, 2013 Value: $42,000 Applicant: Cory Slack | Permit type: Commercial | Permit id: Bldg-2013-05075 | Parcel: 8802000020 | |||||
Replace plasma cutting equipment with new laser cutting machine o2 & air lines. Date: July 8, 2013 Value: $4,500 Applicant: Nathan Isbell | Permit type: Mechanical - otc | Permit id: Mech-2013-06088 | Parcel: 8802000020 | |||||
Reinstatement of mech-2013-01707 - add new natural gas piping to service future oven in manufacturing facility/ ties into existing piping removed from existing meter/ 6 ft total piping. Date: October 10, 2013 Value: $125,000 Applicant: Kevin Almon | Permit type: Mechanical plan review | Permit id: Mech-2013-09573 | Parcel: 8802000020 | |||||
Terex-bldg 6alter existing receptacle circuit/ install 3in conduit sleeve. Customer paid for:(1) new circuit Date: December 26, 2013 Value: $800 Applicant: Randy Dreyer | Permit type: Electrical - otc | Permit id: Elec-2013-12093 | Parcel: 8802000020 | |||||
Genie bldg 6- calt cantiliever rack storage on existing exterior concrete pad Date: March 25, 2014 Value: $14,500 Applicant: Ed Medrano | Permit type: Rack storage | Permit id: Bldg-2014-01452 | Parcel: 8802000020 | |||||
Sopa - genie - add saftey lights at exterior loading area customer paid for:(1) new circuit Date: May 23, 2014 Value: $3,200 Applicant: Kent Vanderweide | Permit type: Electrical - otc | Permit id: Elec-2014-04577 | Parcel: 8802000020 | |||||
Genie industries-bldg 6 - install natural gas piping from east production aisle in the truss space and then cap off. Date: June 9, 2015 Value: $54,551 Applicant: Jacob Leclair | Permit type: Mechanical - otc | Permit id: Mech-2015-04231 | Parcel: 8802000020 | |||||
Genie industries-bldg 6 - install new 1-1/2in reduced pressure backflow preventor Date: June 9, 2015 Value: $7,524 Applicant: Jacob Leclair | Permit type: Plumbing - otc | Permit id: Plum-2015-04234 | Parcel: 8802000020 | |||||
Terex industries-bldg 7 - replacement of existing fire alarm panel/ two power boosters-at the facp room (existing location) and installing new addressable monitoring modules to supervise existing detection devices. Installing a new radio frequency monitoring panel next to the facp. Date: June 17, 2015 Value: $4,500 Applicant: Gabe Orozco | Permit type: Electrical - otc | Permit id: Elec-2015-04457 | Parcel: 8802000010 | |||||
Sopa terex- seq #31129 - provide power to powder coat system customer paid for:(2) feeder/ (2) subpanel Date: June 23, 2015 Value: $162,368 Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2015-04629 | Parcel: 8802000020 | |||||
Terex industries-bldg 7 - replace existing facp with a new mircom fx-20 at the existing location. Replace existing nac panels with new inx-10a nac panels at their existing location. Replace existing smoke detector with new compatible smoke detector at the existing location. Replace existing monitoring modules with new compatible modules to supervise existing detection devices (w/f/ tampers/ pull stations/ duct det.) at their existing location. Replace all existing a/v devices at their existing location with new ones in order to provide synchronization (same brand/ new model) note: no relocation and/or modification to existing notification system. One transmitter/ one control panel/ two sub power supply/ 14 devices Date: July 14, 2015 Applicant: Gabe Orozco | Permit type: Fire alarm | Permit id: Fire-2015-04459 | Parcel: 8802000010 | |||||
Terex genie-bldg 6 column e-7 - tie into existing 6in sanitary sewer clean-out. Install a 4in drain and clean out approximately away. Located near column e7 on the west side of the building Date: July 30, 2015 Value: $4,000 Applicant: J J Setera | Permit type: Plumbing - otc | Permit id: Plum-2015-05761 | Parcel: 8802000020 | |||||
Calt - installation of a powder coat system including overhead conveyor/ blast booth/ wash booths/ ovens (3)/ powder coat booths. Installation of outdoor dust collector to be placed on structural slab - with screening. Total of roof vent penetrations 6 ft. In height. Total area of work 24/560. Date: August 5, 2015 Value: $3,500,000 Applicant: William Strouse | Permit type: Commercial | Permit id: Bldg-2015-03029 | Parcel: 8802000020 | |||||
Genie bldg 7 convection cure oven- install a convection oven on their existing conveyorized powder coating system. Date: August 24, 2015 Applicant: Cory Slack | Permit type: Fire installation | Permit id: Fire-2015-06057 | Parcel: 8802000010 | |||||
Convection oven - genie industries - bldg 7 - 206-367-5115 - installation of new convection oven for existing powder coating line. Roof exhaust shall be painted to match roof. Date: August 25, 2015 Value: $156,000 Applicant: Cory Slack | Permit type: Mechanical plan review | Permit id: Mech-2015-06089 | Parcel: 8802000010 | |||||
Genie - terex - 206-227-3135 - installation of a new gas line to the new powder coating oven. Includes (1) gas piping only. Date: August 25, 2015 Value: $4,000 Applicant: Cory Slack | Permit type: Mechanical - otc | Permit id: Mech-2015-06463 | Parcel: 8802000010 | |||||
Sopa - terex #6 - warehouse - 206-762-14 - tie in the supression system for the dust collector to the facp. Plans available on site. Date: September 3, 2015 Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2015-06733 | Parcel: 8802000020 | |||||
Sopa - terex building 6 - warehouse - 206-762-14 - tie in the suppression system for the dust collector to the facp. Customer paid for:(1) low voltage Date: September 3, 2015 Value: $2,000 Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2015-06734 | Parcel: 8802000020 | |||||
Genie industries-bldg 6 powder coat - installation of three ovens for a powder coat system (dry-off oven/ gel oven/ cure oven; all function in the 4 degree range) moon construction is the contractor/ therma-tron x is the manufacturer. Installation is by contractor / manufacturer / terex. Overall coordination by terex. (technical questions can be directed to trevor schultz 206-284-1181x106) Date: September 25, 2015 Applicant: William Strouse | Permit type: Fire installation | Permit id: Fire-2015-06808 | Parcel: 8802000020 | |||||
Sopa - 206-762-14 - powder coat area - extend the existing sprinkler protection to cover (4) powder coat booths/ area below new cure oven mezzanine/ and access platform. Plans available on site Date: October 12, 2015 Value: $3,500,000 Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2015-07778 | Parcel: 8802000020 | |||||
Genie - building 6 - powder coat system - install 4 manual powder booths for the genie bldg 6 project Date: October 19, 2015 Value: $3,500,000 Applicant: Lindsey Mclain | Permit type: Fire installation | Permit id: Fire-2015-07535 | Parcel: 8802000020 | |||||
Genie building 6 - powder coat system - install outdoor dust collection system for indoor blaster booth system. Scope includes installation of ductwork and (1) outdoor vent fan. Date: October 29, 2015 Value: $167,245 Applicant: William Strouse | Permit type: Mechanical plan review | Permit id: Mech-2015-07534 | Parcel: 8802000020 | |||||
Sopa genie bldg 6 wiring for paint booths customer paid for:(8) subpanel Date: November 19, 2015 Value: $21,400 Applicant: Laurie Baker | Permit type: Electrical - otc | Permit id: Elec-2015-08858 | Parcel: 8802000020 | |||||
Sopa - terex - bldg 7 - warehouse - 206-762-14 - provide sprinkler coverage for new powder coat booth. Plans available on-site. Date: December 10, 2015 Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2015-09276 | Parcel: 8802000010 | |||||
Terex/genie - bldg 7 - powder coating booth - 425-754-3934 - removal of current blue topcoat booth with automatic guns on the conveyorized line and installation of new replacement powder booth with new automatic guns. This new booth will allow for the faster color changes and the ability to reclaim all powder coatings being sprayed. The dust collection system is similar to the booth we installed in blg 3 the end of 21042015/ the main difference is the new booth has a cyclone to sperate the powder from the prior to the dust collector/ so the powder can be reused rather than wasted Date: December 14, 2015 Applicant: J.R. Rogers | Permit type: Fire installation | Permit id: Fire-2015-08620 | Parcel: 8802000010 | |||||
Sopa/terex/chris ward 206-793-4041/seq #37444 - electrical support to install pre-skidded and pre-assembled wiring method to facilitate the new inwheelabratorin machine. Customer paid for:(1) subpanel Date: December 30, 2015 Value: $14,435 Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2015-09754 | Parcel: 8802000020 | |||||
To store and use hazardous materials in accordance with hmis. Date: December 31, 2015 Value: $3,500,000 Applicant: Lindsey Mclain | Permit type: Fire installation | Permit id: Fire-2015-09513 | Parcel: 8802000020 | |||||
Genie building 6 - installation of fixed explosion suppression system for dust collection system. Total 6 devices. Date: December 31, 2015 Value: $3,500,000 Applicant: Lindsey Mclain | Permit type: Fire fixed suppression | Permit id: Fire-2015-07536 | Parcel: 8802000020 | |||||
Genie building 6 - first floor mezzanines - installation of three (3) rooftop units/ ductwork/ and grilles/diffusers. Date: September 27, 2016 Value: $27,939 Applicant: Alex Burkhart | Permit type: Mechanical plan review | Permit id: Mech-2016-07961 | Parcel: 8802000020 | |||||
Cadd - genie building 6 - first floor mezzanines - construction of two (2) new mezzanine structures/ north and south/ totaling 4/643 sf. New square footage is for b occupancy offices. New concrete footings/ steel structure/ concrete deck/ walls and framing/ ceiling/ stairs/ doors/ windows/ and related work. Includes two vertical ada lifts. Area of work 4/643 sf. Date: September 12, 2016 Value: $614,718 Applicant: Carl King | Permit type: Commercial | Permit id: Bldg-2016-04648 | Parcel: 8802000020 | |||||
Genie building 6 - first floor mezzanines - modify the existing sprinkler system to accommodate the new mezzanines/ total 86 heads. Date: August 17, 2016 Value: $614,718 Applicant: Jeff Smith | Permit type: Fire sprinkler - commercial | Permit id: Fire-2016-06519 | Parcel: 8802000020 | |||||
Terex industries/ bldg # 6 Date: January 1, 2016 Permit type: Fire alarm operational | Permit id: Fire-2013-02842 | Parcel: 8802000020 | |||||
Terex industries/ bldg # 7 Date: January 1, 2016 Permit type: Fire alarm operational | Permit id: Fire-2013-02848 | Parcel: 8802000010 | |||||
Sopa - genie/terex building 6 - first floor mezzanines - 206-762-14 -add three (3) horn/strobes and two (2) strobes to the north mezzanine. Add two (2) horn/strobes and two (2) strobes to the south mezzanine. Plans available on site. Date: November 17, 2016 Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-09315 | Parcel: 8802000020 | |||||
Genie - building 7 - installation of new exhaust fan and ductwork. Exhaust fan to be painted to match color of room. Date: July 26, 2016 Value: $6,197 Applicant: Ivy Levangie | Permit type: Mechanical - otc | Permit id: Mech-2016-06343 | Parcel: 8802000010 | |||||
Genie building 6 - first floor mezzanines -installation of three (3) thermostats and one (1) co2 sensor. Date: September 22, 2016 Value: $720 Applicant: Alex Burkhart | Permit type: Electrical - otc | Permit id: Elec-2016-07960 | Parcel: 8802000020 | |||||
Sopa - terex 37554 - bldg 7 - 425-864-2119 - seq# 37554. Install (4) 30a 3-ph 480v circuits. (1) 100a 480v 3-ph feeder. (1) 75kva xfer. (1) 225a panel & (10) 20a 120v branch circuits from this panel to facilitate production line relocation. Customer paid for:(14) new circuit/ (2) feeder Date: September 16, 2016 Value: $25,796 Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-07799 | Parcel: 8802000010 | |||||
Sopa - genie e-coat demolition - bldg 6 - provide and install fourteen (14) audio/visual devices to provide coverage in former e-coat area. Tie in new devices to existing fire alarm panel and test for functionality. Customer paid for:(14) low voltage Date: October 25, 2016 Value: $2,500 Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-08778 | Parcel: 8802000020 | |||||
Sopa- genie bldg 206. 633. 2811.-ti including demo/ installing lights/ receptacles moto and mechanical connections. Customer paid for:(3) new circuit. Date: October 18, 2016 Value: $55,000 Applicant: Peg Corbett | Permit type: Electrical - otc | Permit id: Elec-2016-08633 | Parcel: 8802000020 | |||||
Sopa - genie/terex building 6 - first floor mezzanines - add three (3) horn/strobes and two (2) strobes to the north mezzanine. Add two (2) horn/strobes and two (2) strobes to the south mezzanine. Customer paid for:(9) fire alarm Date: November 17, 2016 Value: $3,000 Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-09313 | Parcel: 8802000020 | |||||
Sopa - terex warehouse - rt69 assembly line - seq #37609 - facilitate the power relocation of the gs69 assembly line. Customer paid for:(10) new circuit/ (2) feeder Date: November 16, 2016 Value: $31,044 Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-09273 | Parcel: 8802000010 | |||||
Sopa/genie-bldg 6 terex/206-762-1450/provide and install eleven (11) audio/visual devices for columns/ powder coat booths/ and prime booth. Provide and install one (1) pull station for manual activation. Customer paid for:(11) fire alarm customer paid for:(12) fire alarm Date: March 2, 2016 Value: $12,950 Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-01568 | Parcel: 8802000020 | |||||
Cofo - comm ext alt - genie e-coat demolition - bldg 6 - change of occupancy from h-7 to f-1 in area of work. Demolition of existing e-coat paint system and supporting structure/ and demolition of rooftop mechanical equipment. Associated repairs of concrete slab on grade/ walls/ and roof. Includes the infill of (1) existing door and the replacement of (1) existing door. Total area of work = 38/0 sq ft. Date: June 7, 2016 Value: $200,000 Applicant: Lindsey Mclain | Permit type: Change of occupancy | Permit id: Bldg-2016-01158 | Parcel: 8802000020 | |||||
Sopa - terex - 206-639-8832 - install (4) 30a 3-ph 480v circuits (1) 100a 480v 3-ph feeder (1) 75kva transformer (1) 225a panel and (10) 20a 120v branch circuits from this panel to facilitate production line relocation. Customer paid for:(14) new circuit/ (2) feeder Date: August 29, 2016 Value: $25,796 Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-07271 | Parcel: 8802000020 | |||||
Sopa/terex-bldg 7 mezzanine/206-762-1450/retrofit the existing fire sprinkler system to provide coverage underneath the mezzanine. Date: February 9, 2016 Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2016-00946 | Parcel: 8802000010 | |||||
Sopa/genie-bldg 6 terex/206-762-1450/provde/install eleven (11) audio/visual devices in powder coat booths and prime booth area. Provide/install one (1) pull station for manual activation at colymn between blast booth and powder booth. Date: March 2, 2016 Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-01571 | Parcel: 8802000020 | |||||
SCORE 88 Relocating blast booth from bldg 2 to bldg 6. Provide and install duct supports and bracing for existing ducting located on roof. 3 sq ft interior remodel. 1 sq ft exterior alteration. Reinstated permit b110136 Applicant: Cory Slack | Permit type: Commercial | Permit id: Bldg-2013-05075 | Parcel: 8802000020 | |||||
SCORE 99 Terex-bldg 6alter existing receptacle circuit install 3in conduit sleeve. Customer paid for:(1) new circuit Applicant: Randy Dreyer | Permit type: Electrical - otc | Permit id: Elec-2013-12093 | Parcel: 8802000020 | |||||
SCORE 86 Genie bldg 6- calt cantiliever rack storage on existing exterior concrete pad Applicant: Ed Medrano | Permit type: Rack storage | Permit id: Bldg-2014-01452 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - genie - add saftey lights at exterior loading area customer paid for:(1) new circuit Applicant: Kent Vanderweide | Permit type: Electrical - otc | Permit id: Elec-2014-04577 | Parcel: 8802000020 | |||||
SCORE 100 Terex industries-bldg 7 - replacement of existing fire alarm panel two power boosters-at the facp room (existing location) and installing new addressable monitoring modules to supervise existing detection devices. Installing a new radio frequency monitoring panel next to the facp. Applicant: Gabe Orozco | Permit type: Electrical - otc | Permit id: Elec-2015-04457 | Parcel: 8802000010 | |||||
SCORE 100 Sopa terex- seq #31129 - provide power to powder coat system customer paid for:(2) feeder (2) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2015-04629 | Parcel: 8802000020 | |||||
SCORE 80 Calt - installation of a powder coat system including overhead conveyor blast booth wash booths ovens (3) powder coat booths. Installation of outdoor dust collector to be placed on structural slab - with screening. Total of roof vent penetrations 6 ft. In height. Total area of work 24 560. Applicant: William Strouse | Permit type: Commercial | Permit id: Bldg-2015-03029 | Parcel: 8802000020 | |||||
SCORE 100 Sopa genie bldg 6 wiring for paint booths customer paid for:(8) subpanel Applicant: Laurie Baker | Permit type: Electrical - otc | Permit id: Elec-2015-08858 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - terex building 6 - warehouse - 206-762-14 - tie in the suppression system for the dust collector to the facp. Customer paid for:(1) low voltage Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2015-06734 | Parcel: 8802000020 | |||||
SCORE 100 Sopa terex chris ward 206-793-4041 seq #37444 - electrical support to install pre-skidded and pre-assembled wiring method to facilitate the new inwheelabratorin machine. Customer paid for:(1) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2015-09754 | Parcel: 8802000020 | |||||
SCORE 89 Sopa genie-bldg 6 terex 206-762-1450 provide and install eleven (11) audio visual devices for columns powder coat booths and prime booth. Provide and install one (1) pull station for manual activation. Customer paid for:(11) fire alarm customer paid for:(12) fire alarm Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-01568 | Parcel: 8802000020 | |||||
SCORE 67 Cofo - comm ext alt - genie e-coat demolition - bldg 6 - change of occupancy from h-7 to f-1 in area of work. Demolition of existing e-coat paint system and supporting structure and demolition of rooftop mechanical equipment. Associated repairs of concrete slab on grade walls and roof. Includes the infill of (1) existing door and the replacement of (1) existing door. Total area of work = 38 0 sq ft. Applicant: Lindsey Mclain | Permit type: Change of occupancy | Permit id: Bldg-2016-01158 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - terex - 206-639-8832 - install (4) 30a 3-ph 480v circuits (1) 100a 480v 3-ph feeder (1) 75kva transformer (1) 225a panel and (10) 20a 120v branch circuits from this panel to facilitate production line relocation. Customer paid for:(14) new circuit (2) feeder Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-07271 | Parcel: 8802000020 | |||||
SCORE 95 Genie building 6 - first floor mezzanines -installation of three (3) thermostats and one (1) co2 sensor. Applicant: Alex Burkhart | Permit type: Electrical - otc | Permit id: Elec-2016-07960 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - terex 37554 - bldg 7 - 425-864-2119 - seq# 37554. Install (4) 30a 3-ph 480v circuits. (1) 100a 480v 3-ph feeder. (1) 75kva xfer. (1) 225a panel & (10) 20a 120v branch circuits from this panel to facilitate production line relocation. Customer paid for:(14) new circuit (2) feeder Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-07799 | Parcel: 8802000010 | |||||
SCORE 100 Cadd - genie building 6 - first floor mezzanines - construction of two (2) new mezzanine structures north and south totaling 4 643 sf. New square footage is for b occupancy offices. New concrete footings steel structure concrete deck walls and framing ceiling stairs doors windows and related work. Includes two vertical ada lifts. Area of work 4 643 sf. Applicant: Carl King | Permit type: Commercial | Permit id: Bldg-2016-04648 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - genie e-coat demolition - bldg 6 - provide and install fourteen (14) audio visual devices to provide coverage in former e-coat area. Tie in new devices to existing fire alarm panel and test for functionality. Customer paid for:(14) low voltage Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-08778 | Parcel: 8802000020 | |||||
SCORE 98 Sopa- genie bldg 206. 633. 2811.-ti including demo installing lights receptacles moto and mechanical connections. Customer paid for:(3) new circuit. Applicant: Peg Corbett | Permit type: Electrical - otc | Permit id: Elec-2016-08633 | Parcel: 8802000020 | |||||
SCORE 89 Sopa - genie terex building 6 - first floor mezzanines - add three (3) horn strobes and two (2) strobes to the north mezzanine. Add two (2) horn strobes and two (2) strobes to the south mezzanine. Customer paid for:(9) fire alarm Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-09313 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - terex warehouse - rt69 assembly line - seq #37609 - facilitate the power relocation of the gs69 assembly line. Customer paid for:(10) new circuit (2) feeder Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-09273 | Parcel: 8802000010 | |||||
SCORE 56 Comm ti- genie bldg 6- column e repair- replace column damaged during demolition. Erect shoring towers per shoring tower plans. Remove damaged column (e10) and replace per structural plans. Applicant: Carl King | Permit type: Commercial | Permit id: Bldg-2016-09601 | Parcel: 8802000020 | |||||
SCORE 100 Terex industries-bldg 7 - replace existing facp with a new mircom fx-20 at the existing location. Replace existing nac panels with new inx-10a nac panels at their existing location. Replace existing smoke detector with new compatible smoke detector at the existing location. Replace existing monitoring modules with new compatible modules to supervise existing detection devices (w f tampers pull stations duct det.) at their existing location. Replace all existing a v devices at their existing location with new ones in order to provide synchronization (same brand new model) note: no relocation and or modification to existing notification system. One transmitter one control panel two sub power supply 14 devices Date: July 14, 2015 Contractor: The Safety Team Applicant: Gabe Orozco | Permit type: Fire alarm | Permit id: Fire-2015-04459 | Parcel: 8802000010 | |||||
SCORE 88 Genie bldg 7 convection cure oven- install a convection oven on their existing conveyorized powder coating system. Date: August 24, 2015 Contractor: Industrial Air Systems Inc Applicant: Cory Slack | Permit type: Fire installation | Permit id: Fire-2015-06057 | Parcel: 8802000010 | |||||
SCORE 100 Sopa - 206-762-14 - powder coat area - extend the existing sprinkler protection to cover (4) powder coat booths area below new cure oven mezzanine and access platform. Plans available on site Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2015-07778 | Parcel: 8802000020 | |||||
SCORE 88 Genie - building 6 - powder coat system - install 4 manual powder booths for the genie bldg 6 project Applicant: Lindsey Mclain | Permit type: Fire installation | Permit id: Fire-2015-07535 | Parcel: 8802000020 | |||||
SCORE 80 Genie industries-bldg 6 powder coat - installation of three ovens for a powder coat system (dry-off oven gel oven cure oven; all function in the 4 degree range) moon construction is the contractor therma-tron x is the manufacturer. Installation is by contractor manufacturer terex. Overall coordination by terex. (technical questions can be directed to trevor schultz 206-284-1181x106) Date: September 25, 2015 Contractor: Moon Construction Company Applicant: William Strouse | Permit type: Fire installation | Permit id: Fire-2015-06808 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - terex #6 - warehouse - 206-762-14 - tie in the supression system for the dust collector to the facp. Plans available on site. Date: September 3, 2015 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2015-06733 | Parcel: 8802000020 | |||||
SCORE 80 To store and use hazardous materials in accordance with hmis. Applicant: Lindsey Mclain | Permit type: Fire installation | Permit id: Fire-2015-09513 | Parcel: 8802000020 | |||||
SCORE 89 Sopa - terex - bldg 7 - warehouse - 206-762-14 - provide sprinkler coverage for new powder coat booth. Plans available on-site. Date: December 10, 2015 Contractor: Safety Team Inc The Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2015-09276 | Parcel: 8802000010 | |||||
SCORE 64 Genie building 6 - installation of fixed explosion suppression system for dust collection system. Total 6 devices. Applicant: Lindsey Mclain | Permit type: Fire fixed suppression | Permit id: Fire-2015-07536 | Parcel: 8802000020 | |||||
SCORE 88 Terex genie - bldg 7 - powder coating booth - 425-754-3934 - removal of current blue topcoat booth with automatic guns on the conveyorized line and installation of new replacement powder booth with new automatic guns. This new booth will allow for the faster color changes and the ability to reclaim all powder coatings being sprayed. The dust collection system is similar to the booth we installed in blg 3 the end of 21042015 the main difference is the new booth has a cyclone to sperate the powder from the prior to the dust collector so the powder can be reused rather than wasted Date: December 14, 2015 Contractor: Industrial Air Systems Inc Applicant: J.R. Rogers | Permit type: Fire installation | Permit id: Fire-2015-08620 | Parcel: 8802000010 | |||||
Terex industries bldg # 7 Date: January 1, 2016 Permit type: Fire alarm operational | Permit id: Fire-2013-02848 | Parcel: 8802000010 | |||||
Terex industries bldg # 6 Date: January 1, 2016 Permit type: Fire alarm operational | Permit id: Fire-2013-02842 | Parcel: 8802000020 | |||||
SCORE 100 Sopa terex-bldg 7 mezzanine 206-762-1450 retrofit the existing fire sprinkler system to provide coverage underneath the mezzanine. Date: February 9, 2016 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2016-00946 | Parcel: 8802000010 | |||||
SCORE 100 Sopa genie-bldg 6 terex 206-762-1450 provde install eleven (11) audio visual devices in powder coat booths and prime booth area. Provide install one (1) pull station for manual activation at colymn between blast booth and powder booth. Date: March 2, 2016 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-01571 | Parcel: 8802000020 | |||||
SCORE 100 Genie building 6 - first floor mezzanines - modify the existing sprinkler system to accommodate the new mezzanines total 86 heads. Applicant: Jeff Smith | Permit type: Fire sprinkler - commercial | Permit id: Fire-2016-06519 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - genie terex building 6 - first floor mezzanines - 206-762-14 -add three (3) horn strobes and two (2) strobes to the north mezzanine. Add two (2) horn strobes and two (2) strobes to the south mezzanine. Plans available on site. Date: November 17, 2016 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-09315 | Parcel: 8802000020 | |||||
SCORE 99 Replace plasma cutting equipment with new laser cutting machine o2 & air lines. Applicant: Nathan Isbell | Permit type: Mechanical - otc | Permit id: Mech-2013-06088 | Parcel: 8802000020 | |||||
SCORE 99 Reinstatement of mech-2013-01707 - add new natural gas piping to service future oven in manufacturing facility ties into existing piping removed from existing meter 6 ft total piping. Applicant: Kevin Almon | Permit type: Mechanical plan review | Permit id: Mech-2013-09573 | Parcel: 8802000020 | |||||
SCORE 99 Add new natural gas piping to service future oven in manufacturing facility ties into existing piping & existing meter. 1. 5 million btu. Applicant: Kevin Almon | Permit type: Mechanical plan review | Permit id: Mech-2013-01531 | Parcel: 8802000020 | |||||
SCORE 99 Genie industries-bldg 6 - install natural gas piping from east production aisle in the truss space and then cap off. Applicant: Jacob Leclair | Permit type: Mechanical - otc | Permit id: Mech-2015-04231 | Parcel: 8802000020 | |||||
SCORE 99 Genie industries-bldg 6 - install new 1-1 2in reduced pressure backflow preventor Applicant: Jacob Leclair | Permit type: Plumbing - otc | Permit id: Plum-2015-04234 | Parcel: 8802000020 | |||||
SCORE 84 Terex genie-bldg 6 column e-7 - tie into existing 6in sanitary sewer clean-out. Install a 4in drain and clean out approximately away. Located near column e7 on the west side of the building Applicant: J J Setera | Permit type: Plumbing - otc | Permit id: Plum-2015-05761 | Parcel: 8802000020 | |||||
SCORE 88 Convection oven - genie industries - bldg 7 - 206-367-5115 - installation of new convection oven for existing powder coating line. Roof exhaust shall be painted to match roof. Applicant: Cory Slack | Permit type: Mechanical plan review | Permit id: Mech-2015-06089 | Parcel: 8802000010 | |||||
SCORE 88 Genie - terex - 206-227-3135 - installation of a new gas line to the new powder coating oven. Includes (1) gas piping only. Applicant: Cory Slack | Permit type: Mechanical - otc | Permit id: Mech-2015-06463 | Parcel: 8802000010 | |||||
SCORE 64 Genie building 6 - powder coat system - install outdoor dust collection system for indoor blaster booth system. Scope includes installation of ductwork and (1) outdoor vent fan. Applicant: William Strouse | Permit type: Mechanical plan review | Permit id: Mech-2015-07534 | Parcel: 8802000020 | |||||
SCORE 100 Genie - building 7 - installation of new exhaust fan and ductwork. Exhaust fan to be painted to match color of room. Applicant: Ivy Levangie | Permit type: Mechanical - otc | Permit id: Mech-2016-06343 | Parcel: 8802000010 | |||||
SCORE 95 Genie building 6 - first floor mezzanines - installation of three (3) rooftop units ductwork and grilles diffusers. Applicant: Alex Burkhart | Permit type: Mechanical plan review | Permit id: Mech-2016-07961 | Parcel: 8802000020 | |||||
SCORE 99 Replace plasma cutting equipment with new laser cutting machine o2 & air lines. Applicant: Nathan Isbell | Permit type: Mechanical - otc | Permit id: Mech-2013-06088 | |||||
SCORE 88 Relocating blast booth from bldg 2 to bldg 6. Provide and install duct supports and bracing for existing ducting located on roof. 3 sq ft interior remodel. 1 sq ft exterior alteration. Reinstated permit b110136 Applicant: Cory Slack | Permit type: Commercial | Permit id: Bldg-2013-05075 | |||||
SCORE 99 Reinstatement of mech-2013-01707 - add new natural gas piping to service future oven in manufacturing facility ties into existing piping removed from existing meter 6 ft total piping. Applicant: Kevin Almon | Permit type: Mechanical plan review | Permit id: Mech-2013-09573 | |||||
SCORE 99 Add new natural gas piping to service future oven in manufacturing facility ties into existing piping & existing meter. 1. 5 million btu. Applicant: Kevin Almon | Permit type: Mechanical plan review | Permit id: Mech-2013-01531 | |||||
SCORE 99 Terex-bldg 6alter existing receptacle circuit install 3in conduit sleeve. Customer paid for:(1) new circuit Applicant: Randy Dreyer | Permit type: Electrical - otc | Permit id: Elec-2013-12093 | |||||
SCORE 86 Genie bldg 6- calt cantiliever rack storage on existing exterior concrete pad Applicant: Ed Medrano | Permit type: Rack storage | Permit id: Bldg-2014-01452 | |||||
SCORE 100 Sopa - genie - add saftey lights at exterior loading area customer paid for:(1) new circuit Applicant: Kent Vanderweide | Permit type: Electrical - otc | Permit id: Elec-2014-04577 | |||||
SCORE 100 Terex industries-bldg 7 - replacement of existing fire alarm panel two power boosters-at the facp room (existing location) and installing new addressable monitoring modules to supervise existing detection devices. Installing a new radio frequency monitoring panel next to the facp. Applicant: Gabe Orozco | Permit type: Electrical - otc | Permit id: Elec-2015-04457 | |||||
SCORE 99 Genie industries-bldg 6 - install natural gas piping from east production aisle in the truss space and then cap off. Applicant: Jacob Leclair | Permit type: Mechanical - otc | Permit id: Mech-2015-04231 | |||||
SCORE 100 Sopa terex- seq #31129 - provide power to powder coat system customer paid for:(2) feeder (2) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2015-04629 | |||||
SCORE 99 Genie industries-bldg 6 - install new 1-1 2in reduced pressure backflow preventor Applicant: Jacob Leclair | Permit type: Plumbing - otc | Permit id: Plum-2015-04234 | |||||
SCORE 100 Terex industries-bldg 7 - replace existing facp with a new mircom fx-20 at the existing location. Replace existing nac panels with new inx-10a nac panels at their existing location. Replace existing smoke detector with new compatible smoke detector at the existing location. Replace existing monitoring modules with new compatible modules to supervise existing detection devices (w f tampers pull stations duct det.) at their existing location. Replace all existing a v devices at their existing location with new ones in order to provide synchronization (same brand new model) note: no relocation and or modification to existing notification system. One transmitter one control panel two sub power supply 14 devices Date: July 14, 2015 Contractor: The Safety Team Applicant: Gabe Orozco | Permit type: Fire alarm | Permit id: Fire-2015-04459 | |||||
SCORE 84 Terex genie-bldg 6 column e-7 - tie into existing 6in sanitary sewer clean-out. Install a 4in drain and clean out approximately away. Located near column e7 on the west side of the building Applicant: J J Setera | Permit type: Plumbing - otc | Permit id: Plum-2015-05761 | |||||
SCORE 88 Convection oven - genie industries - bldg 7 - 206-367-5115 - installation of new convection oven for existing powder coating line. Roof exhaust shall be painted to match roof. Applicant: Cory Slack | Permit type: Mechanical plan review | Permit id: Mech-2015-06089 | |||||
SCORE 88 Genie bldg 7 convection cure oven- install a convection oven on their existing conveyorized powder coating system. Date: August 24, 2015 Contractor: Industrial Air Systems Inc Applicant: Cory Slack | Permit type: Fire installation | Permit id: Fire-2015-06057 | |||||
SCORE 88 Genie - terex - 206-227-3135 - installation of a new gas line to the new powder coating oven. Includes (1) gas piping only. Applicant: Cory Slack | Permit type: Mechanical - otc | Permit id: Mech-2015-06463 | |||||
SCORE 80 Calt - installation of a powder coat system including overhead conveyor blast booth wash booths ovens (3) powder coat booths. Installation of outdoor dust collector to be placed on structural slab - with screening. Total of roof vent penetrations 6 ft. In height. Total area of work 24 560. Applicant: William Strouse | Permit type: Commercial | Permit id: Bldg-2015-03029 | |||||
SCORE 100 Sopa - 206-762-14 - powder coat area - extend the existing sprinkler protection to cover (4) powder coat booths area below new cure oven mezzanine and access platform. Plans available on site Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2015-07778 | |||||
SCORE 64 Genie building 6 - powder coat system - install outdoor dust collection system for indoor blaster booth system. Scope includes installation of ductwork and (1) outdoor vent fan. Applicant: William Strouse | Permit type: Mechanical plan review | Permit id: Mech-2015-07534 | |||||
SCORE 88 Genie - building 6 - powder coat system - install 4 manual powder booths for the genie bldg 6 project Applicant: Lindsey Mclain | Permit type: Fire installation | Permit id: Fire-2015-07535 | |||||
SCORE 100 Sopa genie bldg 6 wiring for paint booths customer paid for:(8) subpanel Applicant: Laurie Baker | Permit type: Electrical - otc | Permit id: Elec-2015-08858 | |||||
SCORE 80 Genie industries-bldg 6 powder coat - installation of three ovens for a powder coat system (dry-off oven gel oven cure oven; all function in the 4 degree range) moon construction is the contractor therma-tron x is the manufacturer. Installation is by contractor manufacturer terex. Overall coordination by terex. (technical questions can be directed to trevor schultz 206-284-1181x106) Date: September 25, 2015 Contractor: Moon Construction Company Applicant: William Strouse | Permit type: Fire installation | Permit id: Fire-2015-06808 | |||||
SCORE 100 Sopa - terex building 6 - warehouse - 206-762-14 - tie in the suppression system for the dust collector to the facp. Customer paid for:(1) low voltage Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2015-06734 | |||||
SCORE 100 Sopa - terex #6 - warehouse - 206-762-14 - tie in the supression system for the dust collector to the facp. Plans available on site. Date: September 3, 2015 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2015-06733 | |||||
SCORE 80 To store and use hazardous materials in accordance with hmis. Applicant: Lindsey Mclain | Permit type: Fire installation | Permit id: Fire-2015-09513 | |||||
SCORE 89 Sopa - terex - bldg 7 - warehouse - 206-762-14 - provide sprinkler coverage for new powder coat booth. Plans available on-site. Date: December 10, 2015 Contractor: Safety Team Inc The Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2015-09276 | |||||
SCORE 64 Genie building 6 - installation of fixed explosion suppression system for dust collection system. Total 6 devices. Applicant: Lindsey Mclain | Permit type: Fire fixed suppression | Permit id: Fire-2015-07536 | |||||
SCORE 100 Sopa terex chris ward 206-793-4041 seq #37444 - electrical support to install pre-skidded and pre-assembled wiring method to facilitate the new inwheelabratorin machine. Customer paid for:(1) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2015-09754 | |||||
SCORE 88 Terex genie - bldg 7 - powder coating booth - 425-754-3934 - removal of current blue topcoat booth with automatic guns on the conveyorized line and installation of new replacement powder booth with new automatic guns. This new booth will allow for the faster color changes and the ability to reclaim all powder coatings being sprayed. The dust collection system is similar to the booth we installed in blg 3 the end of 21042015 the main difference is the new booth has a cyclone to sperate the powder from the prior to the dust collector so the powder can be reused rather than wasted Date: December 14, 2015 Contractor: Industrial Air Systems Inc Applicant: J.R. Rogers | Permit type: Fire installation | Permit id: Fire-2015-08620 | |||||
SCORE 100 Sopa terex-bldg 7 mezzanine 206-762-1450 retrofit the existing fire sprinkler system to provide coverage underneath the mezzanine. Date: February 9, 2016 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2016-00946 | |||||
SCORE 89 Sopa genie-bldg 6 terex 206-762-1450 provide and install eleven (11) audio visual devices for columns powder coat booths and prime booth. Provide and install one (1) pull station for manual activation. Customer paid for:(11) fire alarm customer paid for:(12) fire alarm Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-01568 | |||||
SCORE 100 Sopa genie-bldg 6 terex 206-762-1450 provde install eleven (11) audio visual devices in powder coat booths and prime booth area. Provide install one (1) pull station for manual activation at colymn between blast booth and powder booth. Date: March 2, 2016 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-01571 | |||||
SCORE 67 Cofo - comm ext alt - genie e-coat demolition - bldg 6 - change of occupancy from h-7 to f-1 in area of work. Demolition of existing e-coat paint system and supporting structure and demolition of rooftop mechanical equipment. Associated repairs of concrete slab on grade walls and roof. Includes the infill of (1) existing door and the replacement of (1) existing door. Total area of work = 38 0 sq ft. Applicant: Lindsey Mclain | Permit type: Change of occupancy | Permit id: Bldg-2016-01158 | |||||
SCORE 100 Genie - building 7 - installation of new exhaust fan and ductwork. Exhaust fan to be painted to match color of room. Applicant: Ivy Levangie | Permit type: Mechanical - otc | Permit id: Mech-2016-06343 | |||||
SCORE 100 Sopa - terex - 206-639-8832 - install (4) 30a 3-ph 480v circuits (1) 100a 480v 3-ph feeder (1) 75kva transformer (1) 225a panel and (10) 20a 120v branch circuits from this panel to facilitate production line relocation. Customer paid for:(14) new circuit (2) feeder Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-07271 | |||||
SCORE 100 Genie building 6 - first floor mezzanines - modify the existing sprinkler system to accommodate the new mezzanines total 86 heads. Applicant: Jeff Smith | Permit type: Fire sprinkler - commercial | Permit id: Fire-2016-06519 | |||||
SCORE 95 Genie building 6 - first floor mezzanines -installation of three (3) thermostats and one (1) co2 sensor. Applicant: Alex Burkhart | Permit type: Electrical - otc | Permit id: Elec-2016-07960 | |||||
SCORE 95 Genie building 6 - first floor mezzanines - installation of three (3) rooftop units ductwork and grilles diffusers. Applicant: Alex Burkhart | Permit type: Mechanical plan review | Permit id: Mech-2016-07961 | |||||
SCORE 100 Sopa - terex 37554 - bldg 7 - 425-864-2119 - seq# 37554. Install (4) 30a 3-ph 480v circuits. (1) 100a 480v 3-ph feeder. (1) 75kva xfer. (1) 225a panel & (10) 20a 120v branch circuits from this panel to facilitate production line relocation. Customer paid for:(14) new circuit (2) feeder Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-07799 | |||||
SCORE 100 Cadd - genie building 6 - first floor mezzanines - construction of two (2) new mezzanine structures north and south totaling 4 643 sf. New square footage is for b occupancy offices. New concrete footings steel structure concrete deck walls and framing ceiling stairs doors windows and related work. Includes two vertical ada lifts. Area of work 4 643 sf. Applicant: Carl King | Permit type: Commercial | Permit id: Bldg-2016-04648 | |||||
SCORE 100 Sopa - genie e-coat demolition - bldg 6 - provide and install fourteen (14) audio visual devices to provide coverage in former e-coat area. Tie in new devices to existing fire alarm panel and test for functionality. Customer paid for:(14) low voltage Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-08778 | |||||
SCORE 98 Sopa- genie bldg 206. 633. 2811.-ti including demo installing lights receptacles moto and mechanical connections. Customer paid for:(3) new circuit. Applicant: Peg Corbett | Permit type: Electrical - otc | Permit id: Elec-2016-08633 | |||||
SCORE 89 Sopa - genie terex building 6 - first floor mezzanines - add three (3) horn strobes and two (2) strobes to the north mezzanine. Add two (2) horn strobes and two (2) strobes to the south mezzanine. Customer paid for:(9) fire alarm Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2016-09313 | |||||
SCORE 100 Sopa - genie terex building 6 - first floor mezzanines - 206-762-14 -add three (3) horn strobes and two (2) strobes to the north mezzanine. Add two (2) horn strobes and two (2) strobes to the south mezzanine. Plans available on site. Date: November 17, 2016 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-09315 | |||||
SCORE 100 Sopa - terex warehouse - rt69 assembly line - seq #37609 - facilitate the power relocation of the gs69 assembly line. Customer paid for:(10) new circuit (2) feeder Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2016-09273 | |||||
SCORE 89 Sopa#47539 - terex #6 - old ine-coatin - center of warehouse - (206) 762-14 - decommission drop down sprinkler coverage for equipment that was removed. Plans available on site. Date: April 21, 2017 Contractor: Safety Team Inc The Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2017-02877 | |||||
SCORE 96 Genie - bldg 7 - mezzanine - installation and rough-in for kitchen fixtures and one new restroom lavatory. Customer paid for (1) bathroom sink and (2) kitchen sink. Applicant: Greg Smalling | Permit type: Plumbing - otc | Permit id: Plum-2017-00413 | |||||
SCORE 89 Sopa - genie - bldg 7 - mezzanine - 206-762-14 - provide and install two(2) wall mount horn strobes to provide adequate notification in the proposed mezzanine. Tie devices into existing fire alarm panel. Customer paid for:(2) fire alarm Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2017-00451 | |||||
SCORE 95 Genie - bldg 7 - mezzanine - installation of (1) thermostat. Customer paid for (1) low voltage. Applicant: Alex Burkhart | Permit type: Electrical - otc | Permit id: Elec-2017-01169 | |||||
SCORE 89 Sopa #49839 fixture replacement terex north & center area 425-258-1882 - combinined installation in north & center area of fixtures;demo existing fixtures & install (273) fixtures utilizing existing branch circuits customer paid for:(1) new circuit Applicant: Kim Smith | Permit type: Electrical - otc | Permit id: Elec-2017-07423 | Parcel: 8802000010 | |||||
SCORE 100 Sopa #49715 genie-bldg 6 425-864-2119 - seq #37814 - branch circuitry for assembly line customer paid for:(45) new circuit (2) feeder (2) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-07223 | Parcel: 8802000020 | |||||
SCORE 88 Genie - bldg 7 - powder coat preparation - replace and relocate a blast booth and a wash booth used in the preparation of parts for powder coating. Install an in-floor conveyor to advance parts through the system. Applicant: Bryan Schnexnayder | Permit type: Commercial | Permit id: Bldg-2017-06612 | Parcel: 8802000010 | |||||
SCORE 84 Comm ti genie-bldg 6 - tunnel wall demo - remove lower half of non-load bearing wall and install new support structure for remaining upper half of wall. Total area of work = 1 7 sf Applicant: Carl King | Permit type: Commercial | Permit id: Bldg-2017-04291 | |||||
SCORE 100 Otc fire installation place of assembly genie bldg 7 mezzanine - place of assembly seating plan for new 1 6 sf mezzanine for breakroom. Date: August 16, 2017 Contractor: Foushee And Associates Co Inc Applicant: Chris Ackerman | Permit type: Fire installation | Permit id: Fire-2017-06047 | |||||
SCORE 100 Otc fire installation place of assembly genie bldg 7 mezzanine - place of assembly seating plan for new 1 6 sf mezzanine for breakroom. Date: August 16, 2017 Contractor: Foushee And Associates Co Inc Applicant: Chris Ackerman | Permit type: Fire installation | Permit id: Fire-2017-06047 | Parcel: 8802000010 | |||||
SCORE 88 Genie - bldg 7 - dry-off oven relocation - relocation of (1) industrial oven used to dry parts before powder coating. Date: September 29, 2017 Contractor: Industrial Air Systems Inc Applicant: Cory Slack | Permit type: Fire installation | Permit id: Fire-2017-06484 | Parcel: 8802000010 | |||||
SCORE 88 Genie - bldg 7 - cure oven relocation - project includes relocation of (2) existing industrial ovens. Applicant: Bryan Schnexnayder | Permit type: Commercial | Permit id: Bldg-2017-06528 | Parcel: 8802000010 | |||||
SCORE 100 Sopa #50135 - terex bldg 7 - 425-864-2119 - seq #378 - alter (5) amp circuits customer paid for:(5) new circuit Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-07962 | Parcel: 8802000010 | |||||
SCORE 88 Genie - bldg 7 - dry-off oven - project includes the relocation of (1) existing industrial oven. Applicant: Bryan Schnexnayder | Permit type: Commercial | Permit id: Bldg-2017-06530 | Parcel: 8802000010 | |||||
SCORE 89 Sopa - genie - bldg 7 - mezzanine - 206-762-14 - provide and install two(2) wall mount horn strobes to provide adequate notification in the proposed mezzanine. Tie devices into existing fire alarm panel. Customer paid for:(2) fire alarm Applicant: Anne Simonovich | Permit type: Electrical - otc | Permit id: Elec-2017-00451 | Parcel: 8802000010 | |||||
SCORE 88 Genie - bldg 7 - cure ovens relocation - relocate (2) industrial ovens used to cure powder coating Date: October 6, 2017 Contractor: Industrial Air Systems Inc Applicant: Cory Slack | Permit type: Fire installation | Permit id: Fire-2017-06485 | Parcel: 8802000010 | |||||
SCORE 99 Otc genie - bldg 7 - cure oven relocation - extend existing 2in connection 5psi gas feet to drop down to regulator at 2 ovens. During off hours perform a live hot tap 3in ng line with 1-1 2in isolation hot tap valve. Provide 11 2in tee of isolation valve. Drops: supply and install isolation ball valve with 11 2 in gas piping to oven vendor regulators for cure oven 1&2. Paid for 1 gas piping. Applicant: Mason Chaussee | Permit type: Mechanical - otc | Permit id: Mech-2017-07576 | |||||
SCORE 84 Genie - bldg 6 - install new condensate drain piping for new powder coat booth. Connect to existing drain lines. Customer paid for (1) floor drain. Applicant: Allister Mackinnon | Permit type: Plumbing - otc | Permit id: Plum-2017-08377 | |||||
SCORE 89 Sopa #50047 terex industries building 6 206-762-14 - add one (1) wall mount horn strobe below the mechanical room center of west wall and tie into the fire alarm control panel. Plans on site Date: November 2, 2017 Contractor: Safety Team Inc The Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2017-07806 | |||||
SCORE 88 Genie - bldg 7 - powder coat preparation - replace and relocate a blast booth and a wash booth used in the preparation of parts for powder coating. Install an in-floor conveyor to advance parts through the system. Applicant: Bryan Schnexnayder | Permit type: Commercial | Permit id: Bldg-2017-06612 | |||||
SCORE 100 Sopa #50012 gr weld center gr weld center - install overhead branch circuitry for relocated gr weld-cells customer paid for:(21) new circuit (2) feeder Applicant: Kent Vanderweide | Permit type: Electrical - otc | Permit id: Elec-2017-07739 | Parcel: 8802000020 | |||||
SCORE 100 Sopa #48166 - terex bldg 7 - hydraulic power unit - seq #7015813 - provide power to new hydraulic power unit at door # customer paid for:(1) new circuit Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-04083 | Parcel: 8802000010 | |||||
SCORE 100 Sopa #48838 terex bldg 6 large slab assembly 425-864-2119 - seq #37741 - extend an existing or alter a 400a feeder. Provide 400a panelboard customer paid for:(1) feeder (1) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-05424 | Parcel: 8802000020 | |||||
SCORE 84 Comm ti genie-bldg 6 - tunnel wall demo - remove lower half of non-load bearing wall and install new support structure for remaining upper half of wall. Total area of work = 1 7 sf Applicant: Carl King | Permit type: Commercial | Permit id: Bldg-2017-04291 | Parcel: 8802000020 | |||||
Cadd - genie - bldg 7 - mezzanine - construction of one (1) new mezzanine structure totally 1 6 sf. New concrete footings steel structure concrete deck walls and framing ceilings stairs doors windows partial selective demolition and related work. Includes one (1) new ada platform lift. Minor changes in 4 sq ft of floor below. Total area of work = 20 sq ft. Date: August 3, 2017 Value: $450,000 Applicant: Chris Ackerman | Permit type: Commercial | Permit id: Bldg-2016-10117 | Parcel: 8802000010 | |||||
SCORE 86 Calt - genie terex b6 test tower enclosure - installation of a test tower the building and a roof pop-up insulated enclosure exterior to the bldg to provide the needed height for proper testing of large scissor lifts. Work to include creating roughly 9 x 38 penetration in the roof of bldg #6 using steel f beams and channel beams between the existing truss and wf beam structure. New scissors equipment tower will extend approx 12 above surrounding parapet system and 15 above roof. Applicant: William Strouse | Permit type: Commercial | Permit id: Bldg-2017-03275 | Parcel: 8802000020 | |||||
SCORE 89 Sopa #49839 fixture replacement terex north & center area 425-258-1882 - combinined installation in north & center area of fixtures;demo existing fixtures & install (273) fixtures utilizing existing branch circuits customer paid for:(1) new circuit Applicant: Kim Smith | Permit type: Electrical - otc | Permit id: Elec-2017-07423 | |||||
SCORE 100 Sopa #49715 genie-bldg 6 425-864-2119 - seq #37814 - branch circuitry for assembly line customer paid for:(45) new circuit (2) feeder (2) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-07223 | |||||
SCORE 88 Genie - bldg 7 - cure ovens relocation - relocate (2) industrial ovens used to cure powder coating Date: October 6, 2017 Contractor: Industrial Air Systems Inc Applicant: Cory Slack | Permit type: Fire installation | Permit id: Fire-2017-06485 | |||||
SCORE 100 Sopa #48166 - terex bldg 7 - hydraulic power unit - seq #7015813 - provide power to new hydraulic power unit at door # customer paid for:(1) new circuit Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-04083 | |||||
SCORE 100 Sopa #48838 terex bldg 6 large slab assembly 425-864-2119 - seq #37741 - extend an existing or alter a 400a feeder. Provide 400a panelboard customer paid for:(1) feeder (1) subpanel Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-05424 | |||||
SCORE 95 Genie - bldg 7 - mezzanine - installation of one (1) rooftop unit w screening one (1) gas piping outlet one (1) exhaust fan ductwork and grilles diffusers. Customer paid for (1) gas piping only (1) heating equipment including ductwork and (1) vent fan. Applicant: Alex Burkhart | Permit type: Mechanical plan review | Permit id: Mech-2017-01170 | |||||
SCORE 100 Genie bldg 7 mezzanine - modify the existing sprinkler system to accommodate the new mezzanine. Total # of heads = 27 Date: February 1, 2017 Contractor: Smith Fire Systems Inc Applicant: Tangi Alfred-Norris | Permit type: Fire sprinkler - commercial | Permit id: Fire-2017-00518 | |||||
SCORE 84 Comm ext alt - genie - bldg 7 - first floor - expand existing door #35 vertically by 4 ft per detail 1 s-2. Install horizontal channel reinforcement. Saw-cut and remove concrete. Total area of work = 18 sq ft. Applicant: Allister Mackinnon | Permit type: Commercial | Permit id: Bldg-2016-09597 | |||||
SCORE 98 Sopa - genie - bldg 7 - mezzanine - 206-633-2811 - ti including lighting and receptacles. Titan job 175001 customer paid for:(20) new circuit Applicant: Peg Corbett | Permit type: Electrical - otc | Permit id: Elec-2017-00493 | |||||
SCORE 84 Comm ext alt - genie - bldg 7 - first floor - expand existing door #35 vertically by 4 ft per detail 1 s-2. Install horizontal channel reinforcement. Saw-cut and remove concrete. Total area of work = 18 sq ft. Applicant: Allister Mackinnon | Permit type: Commercial | Permit id: Bldg-2016-09597 | Parcel: 8802000010 | |||||
SCORE 98 Sopa - genie - bldg 7 - mezzanine - 206-633-2811 - ti including lighting and receptacles. Titan job 175001 customer paid for:(20) new circuit Applicant: Peg Corbett | Permit type: Electrical - otc | Permit id: Elec-2017-00493 | Parcel: 8802000010 | |||||
SCORE 95 Genie - bldg 7 - mezzanine - installation of (1) thermostat. Customer paid for (1) low voltage. Applicant: Alex Burkhart | Permit type: Electrical - otc | Permit id: Elec-2017-01169 | Parcel: 8802000010 | |||||
SCORE 89 Sopa #50047 terex industries building 6 206-762-14 - add one (1) wall mount horn strobe below the mechanical room center of west wall and tie into the fire alarm control panel. Plans on site Date: November 2, 2017 Contractor: Safety Team Inc The Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2017-07806 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - genie - bldg 7 - mezzanine - 206-762-14 - provide and install (2) two wall mount horn strobes to provide notification to the proposed mezzanine. Tie devices into existing fire alarm panel. Date: January 20, 2017 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2017-00453 | Parcel: 8802000010 | |||||
1882_faop terex genie bldg 7 Date: January 1, 2017 Permit type: Fire alarm operational | Permit id: Fire-2013-02848 | Parcel: 8802000010 | |||||
1881_faop terex genie bldg 6 Date: January 1, 2017 Permit type: Fire alarm operational | Permit id: Fire-2013-02842 | Parcel: 8802000020 | |||||
SCORE 100 Genie bldg 7 mezzanine - modify the existing sprinkler system to accommodate the new mezzanine. Total # of heads = 27 Date: February 1, 2017 Contractor: Smith Fire Systems Inc Applicant: Tangi Alfred-Norris | Permit type: Fire sprinkler - commercial | Permit id: Fire-2017-00518 | Parcel: 8802000010 | |||||
SCORE 100 Sopa - genie e-coat demolition - bldg 6 - provide and install fourteen(14) audio visual devices to provide coverage in former e coat area. Tie in the new devices to exsisting fire alarm panel and test proper functionality. Plans on site Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-08779 | Parcel: 8802000020 | |||||
SCORE 89 Sopa#47539 - terex #6 - old ine-coatin - center of warehouse - (206) 762-14 - decommission drop down sprinkler coverage for equipment that was removed. Plans available on site. Date: April 21, 2017 Contractor: Safety Team Inc The Applicant: Anne Simonovich | Permit type: Fire sprinkler - commercial | Permit id: Fire-2017-02877 | Parcel: 8802000020 | |||||
SCORE 99 Otc genie - bldg 7 - cure oven relocation - extend existing 2in connection 5psi gas feet to drop down to regulator at 2 ovens. During off hours perform a live hot tap 3in ng line with 1-1 2in isolation hot tap valve. Provide 11 2in tee of isolation valve. Drops: supply and install isolation ball valve with 11 2 in gas piping to oven vendor regulators for cure oven 1&2. Paid for 1 gas piping. Applicant: Mason Chaussee | Permit type: Mechanical - otc | Permit id: Mech-2017-07576 | Parcel: 8802000010 | |||||
SCORE 84 Genie - bldg 6 - install new condensate drain piping for new powder coat booth. Connect to existing drain lines. Customer paid for (1) floor drain. Applicant: Allister Mackinnon | Permit type: Plumbing - otc | Permit id: Plum-2017-08377 | Parcel: 8802000020 | |||||
SCORE 86 Calt - genie terex b6 test tower enclosure - installation of a test tower the building and a roof pop-up insulated enclosure exterior to the bldg to provide the needed height for proper testing of large scissor lifts. Work to include creating roughly 9 x 38 penetration in the roof of bldg #6 using steel f beams and channel beams between the existing truss and wf beam structure. New scissors equipment tower will extend approx 12 above surrounding parapet system and 15 above roof. Applicant: William Strouse | Permit type: Commercial | Permit id: Bldg-2017-03275 | |||||
SCORE 88 Genie - bldg 7 - dry-off oven relocation - relocation of (1) industrial oven used to dry parts before powder coating. Date: September 29, 2017 Contractor: Industrial Air Systems Inc Applicant: Cory Slack | Permit type: Fire installation | Permit id: Fire-2017-06484 | |||||
SCORE 100 Sopa #50012 gr weld center gr weld center - install overhead branch circuitry for relocated gr weld-cells customer paid for:(21) new circuit (2) feeder Applicant: Kent Vanderweide | Permit type: Electrical - otc | Permit id: Elec-2017-07739 | |||||
SCORE 88 Genie - bldg 7 - dry-off oven - project includes the relocation of (1) existing industrial oven. Applicant: Bryan Schnexnayder | Permit type: Commercial | Permit id: Bldg-2017-06530 | |||||
SCORE 88 Genie - bldg 7 - cure oven relocation - project includes relocation of (2) existing industrial ovens. Applicant: Bryan Schnexnayder | Permit type: Commercial | Permit id: Bldg-2017-06528 | |||||
SCORE 100 Sopa #50135 - terex bldg 7 - 425-864-2119 - seq #378 - alter (5) amp circuits customer paid for:(5) new circuit Applicant: Julie Durrant | Permit type: Electrical - otc | Permit id: Elec-2017-07962 | |||||
SCORE 100 Sopa - genie - bldg 7 - mezzanine - 206-762-14 - provide and install (2) two wall mount horn strobes to provide notification to the proposed mezzanine. Tie devices into existing fire alarm panel. Date: January 20, 2017 Contractor: The Safety Team Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2017-00453 | |||||
SCORE 67 Reinstated from bldg-16-01158: cofo - comm ext alt - genie e-coat demolition - bldg 6 - change of occupancy from h-7 to f-1 in area of work. Demolition of existing e-coat paint system and supporting structure and demolition of rooftop mechanical equipment. Associated repairs of concrete slab on grade walls and roof. Includes the infill of (1) existing door and the replacement of (1) existing door. Total area of work = 38 0 sq ft. Applicant: Lindsey Mclain | Permit type: Change of occupancy | Permit id: Bldg-2017-00077 | |||||
SCORE 67 Reinstated from bldg-16-01158: cofo - comm ext alt - genie e-coat demolition - bldg 6 - change of occupancy from h-7 to f-1 in area of work. Demolition of existing e-coat paint system and supporting structure and demolition of rooftop mechanical equipment. Associated repairs of concrete slab on grade walls and roof. Includes the infill of (1) existing door and the replacement of (1) existing door. Total area of work = 38 0 sq ft. Applicant: Lindsey Mclain | Permit type: Change of occupancy | Permit id: Bldg-2017-00077 | Parcel: 8802000020 | |||||
SCORE 100 Sopa - genie e-coat demolition - bldg 6 - provide and install fourteen(14) audio visual devices to provide coverage in former e coat area. Tie in the new devices to exsisting fire alarm panel and test proper functionality. Plans on site Applicant: Anne Simonovich | Permit type: Fire alarm | Permit id: Fire-2016-08779 | |||||
SCORE 96 Genie - bldg 7 - mezzanine - installation and rough-in for kitchen fixtures and one new restroom lavatory. Customer paid for (1) bathroom sink and (2) kitchen sink. Applicant: Greg Smalling | Permit type: Plumbing - otc | Permit id: Plum-2017-00413 | Parcel: 8802000010 | |||||
SCORE 95 Genie - bldg 7 - mezzanine - installation of one (1) rooftop unit w screening one (1) gas piping outlet one (1) exhaust fan ductwork and grilles diffusers. Customer paid for (1) gas piping only (1) heating equipment including ductwork and (1) vent fan. Applicant: Alex Burkhart | Permit type: Mechanical plan review | Permit id: Mech-2017-01170 | Parcel: 8802000010 |