Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Continue to use premises as 1 dwelling units 1st fl as lobby management office and multi purpose comunity accessory senior adult day care center Permit id: Use2015-01932 | |||||
Replacing (3) obsolete antennas with new model type. Replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas as per plans as per code Permit id: Com2013-01645 | |||||
Original permit description:(com2012-09570)exterior work: remove and replace existing antennas on existing structure antenna will be located at same rad center as existing. Install 1 new equipment cabinet at existing location as per plans. If installing s Permit id: Com2013-04099 | |||||
Add (2) microwave dish to existing cell site as per plans and as per code if installing suppression system in equipment cabinet then a separate permit is required. Permit id: Com2012-22933 | |||||
Exterior work: remove and replace existing antennas on existing structure antenna will be located at same rad center as existing. Install 1 new equipment cabinet at existing location as per plans. If installing suppression system in equipment then a separ Permit id: Com2012-09570 | |||||
Non structural alterations: adding 3 antennas to roof of existing building and placing an equipt cabinet and panel a 4 x 12 grated platform on the rooftop as shown on the attached plans. As per plans as per code. If installing suppression system in equ Permit id: Com2012-06566 | |||||
Remove 6 antennas and install 6 antennas upgrade equipment cabinets. As per plans and as per code. If installing suppression system in equipment cabinet then separate permit is required. Permit id: Com2011-25605 | |||||
Request for time extension on permit # com2010-088 issued on 04-28- with original completion date of 10-28-10. Original permit description:(com2010-08850)exterior work - upgrade existing electric service from 2 amp to 4 amps - 2 circuits as per co Permit id: Com2010-24072 | |||||
Exterior work - upgrade existing electric service from 2 amp to 4 amps - 2 circuits as per code. Permit id: Com2010-08850 | |||||
Request for time extension onpermit#com2009-11444 issued on 6-10-09 with original completion date of 12-9-09. Amend permit#com2009-11444 issued on 6-10-09 with plans #2009-635 to add prime contractor aslisted above. Original permit description:(com2009-1144 Permit id: Com2010-01122 | |||||
"install (2) 24"" backhaul dish antennas on existing rooftop as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required." Permit id: Com2009-11444 | |||||
Install one microwave dish antenna and related eqiupment on existing steel platform as per plan as per code. Permit id: Com2008-16587 | |||||
"amend permit #com2006-32571 issued on 12/7/06 w plans #2006-1686 to add contractor as stated above. Original permit description:(com2006-32571)replace (5) existing antennas with three new cdma and giden antennas on existing building. Install 7-6""x13-3"" c" Permit id: Com2007-09256 | |||||
"replace (5) existing antennas with three new cdma and giden antennas on existing building. Install 7-6""x13-3"" cabinet on existing steel platform. Install additional cables and power service and telephone service to new cabinet as per plans and code." Permit id: Com2006-32571 | |||||
Improvement of sector antennas relocated from the penthouse to a new stealth antennas screening mount with non penetrating on the roof top as per plans and as per code. Permit id: Com2006-14635 | |||||
Amend permit # com2004-20743 for final inspection Permit id: Com2005-34083 | |||||
Install 1-5 gal highland above ground storage tank with accessories (fire guard) Permit id: Com2005-14940 | |||||
Remove (1) 5 gallon underground heating oil tank under concrete. Permit id: Com2005-13377 | |||||
Amend permit# com2004-20793 issue date 9/14/04 with electrical contractor as listed above. Permit id: Com2004-29169 | |||||
Installation (9) telecommunication antennas with (4) related equipment cabinets to be placed on roof of existing building per bmza 351-04. Permit id: Com2004-20793 | |||||
Installtemp sercice 200ampsand 1 circuit. Permit id: Com2002-11076 | |||||
Amend permit com2002-043 to add electrical contractor Permit id: Com2002-08248 | |||||
Amend permit #com2002-043 issued 7/12/02 to name contractors as stated above Permit id: Com2002-06906 | |||||
"flush-mount 6 panel antennas (each not to exceed 6 long x 8"" wide x 2. 75"" deep) on existing penthouse on roof of the building. Place 2 equipment cabinets (each not to exceed 6 high x 5 wide) on a x 15 steel platform to be constructed on the roof." Permit id: Com2002-04360 | |||||
Request for time extension on permit # com2010-088 issued on 04-28- with original completion date of 10-28-10. Original permit description:(com2010-08850)exterior work - upgrade existing electric service from 2 amp to 4 amps - 2 circuits as per code. Expiration date: April 27, 2011 | Permit id: Com2010-24072 | |||||
Install (2) 24" backhaul dish antennas on existing rooftop as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: December 9, 2009 | Permit id: Com2009-11444 | |||||
Request for time extension onpermit#com2009-11444 issued on 6-10-09 with original completion date of 12-9-09. Amend permit#com2009-11444 issued on 6-10-09 with plans #2009-635 to add prime contractor aslisted above. Original permit description:(com2009-11444)install (2) 24" backhaul dish antennas on existing rooftop as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Expiration date: July 20, 2010 | Permit id: Com2010-01122 | |||||
Original permit description:(com2012-09570)exterior work: remove and replace existing antennas on existing structure antenna will be located at same rad center as existing. Install 1 new equipment cabinet at existing location as per plans. If installing suppression system in equipment then a separate permit is required. Expiration date: May 17, 2013 | Permit id: Com2013-04099 | |||||
Non structural alterations: adding 3 antennas to roof of existing building and placing an equipt cabinet and panel a 4 x 12 grated platform on the rooftop as shown on the attached plans. As per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: April 12, 2013 | Permit id: Com2012-06566 | |||||
Exterior work: remove and replace existing antennas on existing structure antenna will be located at same rad center as existing. Install 1 new equipment cabinet at existing location as per plans. If installing suppression system in equipment then a separate permit is required. Expiration date: May 17, 2013 | Permit id: Com2012-09570 | |||||
Amend permit #com2006-32571 issued on 12/7/06 w plans #2006-1686 to add contractor as stated above. Original permit description:(com2006-32571)replace (5) existing antennas with three new cdma and giden antennas on existing building. Install 7-6x13-3" cabinet on existing steel platform. Install additional cables and power service and telephone service to new cabinet as per plans and code." Expiration date: June 7, 2007 | Permit id: Com2007-09256 | |||||
Flush-mount 6 panel antennas (each not to exceed 6 long x 8" wide x 2. 75" deep) on existing penthouse on roof of the building. Place 2 equipment cabinets (each not to exceed 6 high x 5 wide) on a x 15 steel platform to be constructed on the roof. Connect the antennas to the equipment with coaxial cable. Per bmza 197-02 with conditions therin. Expiration date: January 12, 2003 | Permit id: Com2002-04360 | |||||
Request time extension on permit com2002-043 issued 07/12/02 with new completion date of 08/14/03 Expiration date: August 14, 2003 | Permit id: Com2003-21407 | |||||
Replace (5) existing antennas with three new cdma and giden antennas on existing building. Install 7-6"x13-3" cabinet on existing steel platform. Install additional cables and power service and telephone service to new cabinet as per plans and code. Expiration date: June 7, 2007 | Permit id: Com2006-32571 | |||||
Amend permit #com2006-32571 issued on 12/7/06 w plans #2006-1686 to add contractor as stated above. Original permit description:(com2006-32571)replace (5) existing antennas with three new cdma and giden antennas on existing building. Install 7-6"x13-3" cabinet on existing steel platform. Install additional cables and power service and telephone service to new cabinet as per plans and code. Expiration date: June 7, 2007 | Permit id: Com2007-09256 | |||||
Remove and replace two antennas and add one rru as per plans as per code. Expiration date: November 12, 2017 | Permit id: Com2017-05682 | |||||
Amend permit #com2006-32571 issued on 12 7 06 w plans #2006-1686 to add contractor as stated above. Original permit description:(com2006-32571)replace (5) existing antennas with three new cdma and giden antennas on existing building. Install 7-6"x13-3" cabinet on existing steel platform. Install additional cables and power service and telephone service to new cabinet as per plans and code. Expiration date: June 7, 2007 | Permit id: Com2007-09256 | |||||
Request time extension on permit com2002-043 issued 07 12 02 with new completion date of 08 14 03 Expiration date: August 14, 2003 | Permit id: Com2003-21407 | |||||
Amend permit# com2004-20793 issue date 9 14 04 with electrical contractor as listed above. Expiration date: September 14, 2005 | Permit id: Com2004-29169 | |||||
Amend permit #com2002-043 issued 7 12 02 to name contractors as stated above Expiration date: January 18, 2003 | Permit id: Com2002-06906 |