ACTIVITY
PERMITS VALUATION
RENOVATIONS
Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Non-structural alterations category 1/non-structural alterations/interior work 1 1 sq. Ft. - demo interior non-bearing walls and sheetrock as per code. Demo only separate permit will be pulled for tenant fit-out  Date: March 7, 2016 Value: $3,500Expiration date: September 7, 2016 | Permit id: Com2016-05495 | |||||
Structural alterations/interior work 444 sq ft - 12 x 366" of underpinning drawings per basement plans per engineer plans and drawings. Replace slab (12 x 366"). Install drain tile and underpinning of foundation wall as per engineer cert. The engineer cert. Is required at the completion of work with exact dates of periodic inspection during construction. Existing height is 6 and proposed height is 76". Engineer certified within days of completion. All work per code and drawings. Date: March 8, 2016Value: $14,600Expiration date: September 8, 2016 | Permit id: Com2016-05659 | |||||
Install new water and waste lines to 16 new fixures. Install new lines to a 75 0 btu furnace and 46 0 btu stove. Install gal electric water heater. Install new drain tile and sump pump and sewage ejector in basement. Work done to code. Date: March 23, 2016Value: $5,500Expiration date: September 23, 2016 | Permit id: Com2016-07270 | |||||
Up grade service to 2 amp install new circuits as per code. Date: April 20, 2016Value: $5,000Expiration date: October 20, 2016 | Permit id: Com2016-10023 | |||||
Install new 75 0 btu gas furnace with 2. 5 ton a/c system. Work per code and gas by others. Date: May 6, 2016Value: $6,200Expiration date: November 6, 2016 | Permit id: Com2016-11731 | |||||
Reconstruct waste & water for 9 plumbing fixtures; reconstruct all gas for 2 gas fixtures; 2 furnaces 90k btu/dryer 30k as per code. Date: May 17, 2016Value: $3,000Expiration date: November 17, 2016 | Permit id: Com2016-12849 | |||||
Amend permit#com2016-11731 issued on 5-16-16 to add the following additional work: exhaust duct work supply duct work from new system: original permit# com2016-11731 install new 75 0 btu gas furnace with 2. 5 ton a/c system. Work per code and gas by others. ) Date: May 26, 2016Expiration date: November 6, 2016 | Permit id: Com2016-13708 | |||||
Non-structural alterations/interior work 1007 sq ft - demo all interior non-structural walls. Frame new 2 x 4 @ 16" o/c. Interior walls insulate r- in walls and r-49 in ceiling. Drywall trim 8 interior doorsexterior work - 3 exterior doors 7 windows gutter/downspouts. Replace existing windows and doors same size same locationall work will be done as per code. As per plans. Date: March 21, 2016Value: $15,000Expiration date: September 21, 2016 | Permit id: Com2016-06786 | |||||
Reinstatement(original permit:com2016-10023:up grade service to 2 amp install new circuits as per code.) Date: December 12, 2016Expiration date: January 12, 2017 | Permit id: Com2016-31323 | |||||
Use ptremises as a single family dwelling Date: December 22, 2016Permit id: Use2016-00924 | |||||
Non-structural alterations category 1 non-structural alterations interior work 1 1 sq. Ft. - demo interior non-bearing walls and sheetrock as per code. Demo only separate permit will be pulled for tenant fit-out Date: March 7, 2016Value: $3,500Expiration date: September 7, 2016 | Permit id: Com2016-05495 | |||||
Structural alterations interior work 444 sq ft - 12 x 366" of underpinning drawings per basement plans per engineer plans and drawings. Replace slab (12 x 366"). Install drain tile and underpinning of foundation wall as per engineer cert. The engineer cert. Is required at the completion of work with exact dates of periodic inspection during construction. Existing height is 6 and proposed height is 76". Engineer certified within days of completion. All work per code and drawings. Date: March 8, 2016Value: $14,600Expiration date: September 8, 2016 | Permit id: Com2016-05659 | |||||
Install new 75 0 btu gas furnace with 2. 5 ton a c system. Work per code and gas by others. Date: May 6, 2016Value: $6,200Expiration date: November 6, 2016 | Permit id: Com2016-11731 | |||||
Amend permit#com2016-11731 issued on 5-16-16 to add the following additional work: exhaust duct work supply duct work from new system: original permit# com2016-11731 install new 75 0 btu gas furnace with 2. 5 ton a c system. Work per code and gas by others. ) Date: May 26, 2016Expiration date: November 6, 2016 | Permit id: Com2016-13708 | |||||
Reinstatement(original permit:com2016-05659:structural alterations interior work 444 sq ft - 12 x 366" of underpinning drawings per basement plans per engineer plans and drawings. Replace slab (12 x 366"). Install drain tile and underpinning of foundation wall as per engineer cert. The engineer cert. Is required at the completion of work with exact dates of periodic inspection during construction. Existing height is 6 and proposed height is 76". Engineer certified within days of completion. All work per code and drawings.) Date: December 14, 2016Expiration date: January 14, 2017 | Permit id: Com2016-31599 | |||||
Non-structural alterations interior work 1007 sq ft - demo all interior non-structural walls. Frame new 2 x 4 @ 16" o c. Interior walls insulate r- in walls and r-49 in ceiling. Drywall trim 8 interior doorsexterior work - 3 exterior doors 7 windows gutter downspouts. Replace existing windows and doors same size same locationall work will be done as per code. As per plans. Date: March 21, 2016Value: $15,000Expiration date: September 21, 2016 | Permit id: Com2016-06786 | |||||
Reconstruct waste & water for 9 plumbing fixtures; reconstruct all gas for 2 gas fixtures; 2 furnaces 90k btu dryer 30k as per code. Date: May 17, 2016Value: $3,000Expiration date: November 17, 2016 | Permit id: Com2016-12849 |
