Fit out nail salon 8 pedicure chairs,3 hand sink,1 mop sink,1 washer and hot and cold (shopping center)

Electrical permit already pulled a p # 2583 as per nfpa 72 (south district)

Interior renovations. Remove 1 existing partition. Install new partitions

Relocate 1 sprinkler head to cover hallway - replace heads

Interior alterations to a proposed nail salon to include new interior non-load bearing partitions to create one accessible toilet room, waxing rooms and all other alterations as per approved plans. See app# 551369 for approved mechanical permit.

Install water meter & back flow preventor increase existing meter (shopping center)

Roof recovering (24 guage metal roof).

For the installation of one (1) statically illuminated wall sign to exist. Exterior wall. Separate permit required for electrical work.

One non rated-non rated structural partition, floor tile and shelving.

First floor install one hand sink and one 3 compartment sink with grease trap.

Reconnect sign onto exsisting wiring

For the erection of one(1) flatwall sign and for the face change of existing four(4) faces box sign ( 78"x162"). Size and location as shown in the application. Sign accessory to existing consumer goods on space # 14 as part of an existing shopping center with all other uses as previously approved.

Tenant fit out of branch circuits, outlets switches lights, reusing existing service to feed circuits as per nec 2008 (strip mall retail store)

Upgrade existing fire suppression system to ul-300

Installation of new hvac, including ductwork.

Extend fire alarm system from sprinkler room, install pull stations, notification appliances & ansul monitor module.

6 fixtures with piping,tenant fit out

Hotworks: welding cutting soldering torch work - permit expires:03 06 18

`

Hotworks: welding cutting soldering torch work - permit expires 11 10 2015

Mechanical alterations to proposed nail salon to include new registers diffusers and a ventilation system to supply a minimum airflow rate of 6 cfm based on number of stations at cfm per station as per table 403. 3 of imc and per approved plans. See app# 549991 for approved plans.

Hvac, duct work and diffusers as per plan.

Installation of a new packaged rooftop unit, exhaust fans, supply, return and exhaust duct, exhaust hoods, grilles, registers and diffusers as per plans.

For the retail sale of cellular phones and accessories in store #15 as part of an existing stopping center with parking and uses as previously approved.

Fast form building permit

Hotworks: welding cutting soldering torch work - permit expires: 5 3 18

Renovation of existing retail store, replacement of 12 lights, recepts, re - using existing panel, install 12 cat5 tel data lines plenum rated longest run 50, 1 roof top unit as per 2005 nec (south district)

Fast form building permit

Replace 32-lighting fixtures, 12-outlets & 8-switches, - no additional wiring as per nec 2008 (comm)

For the refacing of four (4) existing roof signs. Size and location as shown on plans. Sign accessory to existing consumer goods on space # 14 as part of an existing shopping center with all other uses as previously approved.

For the installation of a new hvac system including (1) 3 ton rooftop unit, new duct work with n existing 6 ton rooftop unit. Alterations toexisting duct for new layout as per plans.

For the erection of four (4) faces at existing roof sign & supporting aluminum frame backing for connection to exist. Rooftop sign structure. Separate permit required for electrical work.

Installation of signs

Relocate approx 21 sprinkler heads to conform to new floor and ceiling layout

Interior plumbing alterations in tenant space #24 for use as personal services (hand & stone massage & facial spa) - note: "abs pvc" drainage piping is prohibited in this occupancy per section p-902. 5 and "cpvc" water supply piping is also prohibited per section p-809. 2 of the philadelphia plumbing code 2004 - the installation will be per the approved plans and the philadelphia plumbing code 2004

General lighting & power- install receptacles, rough wire circuiting to space & run ckts to lighting locations as per nec 2008 south district

Relocate 33 heads to conform to new floor and ceiling layout.

Interior alterations to tenant space #24 to include demolition and erection of nonbearing partitions, millwork, accessibility upgrades and finishes. Space for use as personal services (spa salon). Space to be fully sprinklered. Separate permit required for plumbing, mechanical, electrical and fire suppression.

Water closet, lav, mop receptor, drinking fountain

Install 2 wc, 2 lavs, 1-3 compartment sink, 2 hand sinks, 1 prep sink, 1 mop sink, 6 floor drains, 5 indirect wastes

Fit out bldg. Service is existing and all wiring asper 2008 nec. Fa system as per nfpa-72(shopping center)(south dist)

Removal of one (1) accessory sign and for the installation of two (2) illuminated signs as per approved plans. Separate electrical permit required.

Erect a flatwall letters on raceway as per plans

Supply - install 1-1 2 drain utility sink, hot - cold water line 1 2" to utility sink, 1 2" water line to water fountain

Three 3 pole amp breakers & 4 single pole amp breakers & 3 amp disconnects

Install one set of channel letters in raceway to front wall per submitted plan.

Install new facp and devices in new ati physical therapy fitout space as per 2008 nec & nfpa 72(offices)

Furnish and install new 400amp service and panels as per 2008 nec(shopping center)(south dist)

Relocating 26 sprinklers

Hotworks: welding cutting soldering torch work - permit expires 07 13 2013

Hotworks: welding cutting soldering torch work - permit expires 2 23 12.

Installation of (9) new fixtures: (2) water closets, (2) lavatories, (1)mop receptor, washing machine drain and (3)floor drains