Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Removing 3 existing antennas and replacing with 3 new antennas adding related ancillary equipment as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Permit id: Com2015-17279 | |||||
Original permit description:(com2012-10012)exterior work-remove and replace existing antennas on existing sturcture. Antenna will be located at same rad center as existing. Add (1) support equipment cabinet at excisting location as per plans as per code. Permit id: Com2013-03340 | |||||
Improve existing industrial steel siding building with new steel siding. Keeping the same footprint but raising the roof on part of the building (building size is approximately x 600) as per plans and as per code. Permit id: Com2012-19435 | |||||
Exterior work-remove and replace existing antennas on existing sturcture. Antenna will be located at same rad center as existing. Add (1) support equipment cabinet at excisting location as per plans as per code. Permit id: Com2012-10012 | |||||
Add 1 circuit upgrade 1 cabinet on steel beams on grade. Remove /replace 3 antennas on tower. Remove 3 antennas on tower as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Permit id: Com2012-01683 | |||||
Amend permit#com2010-191 issued on 9/2/ with plans32010-1164 to add contractors as listed above andoriginal permit description:(com2010-19110)2 dish antennas on existing tower with required equipment as per code and plans. Permit id: Com2011-24444 | |||||
Original permit description:(com2010-20315)addition of three antennas on existing communications structure . No change in height as per plans as per code. If installing supressions system in equipment cabinet(s) then a separate permit is required. Permit id: Com2011-16713 | |||||
Addition of three antennas on existing communications structure . No change in height as per plans as per code. If installing supressions system in equipment cabinet(s) then a separate permit is required. Permit id: Com2010-20315 | |||||
2 dish antennas on existing tower with required equipment as per code and plans. Permit id: Com2010-19110 | |||||
Upgrade existing 2 amp service to 4 amp & 2 ckts as per code Permit id: Com2010-04229 | |||||
Request for time extension on permit com2009-13047 issued on 07/17/09 with original completion date of 01/17/10. Original permit description:(com2009-13047)addition of 2 antennas on existing communication structure. No change in height. If installing sup Permit id: Com2010-01019 | |||||
Addition of 2 antennas on existing communication structure. No change in height. If installing suppression system in equipment cabinets then a separate permit will be required. Clear wireless llc atc 305202. Permit id: Com2009-13047 | |||||
Original permit description:(com2008-12216)addition of antennae on existing telecommunication structure (no height increase) addition of equipment cabinet and pad / platform and addition of meter box as per plans ans as per code. Permit id: Com2009-06532 | |||||
Install 200amp underground service to feed 40amp equipment cable as per code Permit id: Com2008-31159 | |||||
Addition of antennae on existing telecommunication structure (no height increase) addition of equipment cabinet and pad / platform and addition of meter box as per plans ans as per code. Permit id: Com2008-12216 | |||||
(use) use portionof premises for freight terminal w/ accessory office(s). Permit id: Use2008-01123 | |||||
(use) use premises as materials recovery facility. Permit id: Use2008-01124 | |||||
Swapping antennas and adding cables on (9) antennas one antenna per sector will stay the same as per plans and code. Permit id: Com2007-25268 | |||||
Reinstate permit # com2005-25891 for thirty (30) days for final inspection. Original permit description:(com2005-25891)amend permit # com2005-12118 issued on 6/1/05 w/ plan # 563 to add low voltage contractor as listed Permit id: Com2006-36933 | |||||
Amend permit #com2006-10262 issued 5/4/06 w/plans #2006-465 to add contractors as listed. Original permit description:(com2006-10262)an unmanded telecommunications facility consisting of installing a new ground equipment cabinet inside the existing fenced Permit id: Com2006-17361 | |||||
Attach 2 dish antennas to existing tower with 1 cabinet at base inside existing compound. Zoned-m3 Permit id: Com2006-14031 | |||||
An unmanded telecommunications facility consisting of installing a new ground equipment cabinet inside the existing fenced compound and two (2) dish antennas mounted on existing tower as per code and plans. Permit id: Com2006-10262 | |||||
Amend permit # com2005-12118 issued on 6/1/05 w/ plan # 563 to add low voltage contractor as listed Permit id: Com2005-25891 | |||||
Maintenance upgrade - replacementof 9 antennas and 6 antennas on a exist self support and install one equipment cabinet with in a exist unmanned equipment shelter Permit id: Com2005-12118 | |||||
Amend permit# com2004-28495 with plans# 2004-1447 issue date 12/9/04 to name electrical contractor as stated above. Permit id: Com2004-31979 | |||||
Addition of antennas to existing tower and placement of equipment shelter on the ground. Site location 5 rear - nextel Permit id: Com2004-28495 | |||||
(use) a portion of the premises for the placement of a cellular antenna tower. Permit id: Com2004-20653 | |||||
Construct x 15 concrete pad with equipement cabinets. And install antennas on existing tower and install 55 lin. Ft of fencing to match existing fencing per plans on the m-3 portion of premises. Note: an amended site plan to be submitted showing rel Permit id: Com2002-08460 | |||||
Install 20 amp service and new lighting within old building for furture equiptment Permit id: Com2002-02743 | |||||
Request for time extension on permit com2009-13047 issued on 07/17/09 with original completion date of 01/17/10. Original permit description:(com2009-13047)addition of 2 antennas on existing communication structure. No change in height. If installing suppression system in equipment cabinets then a separate permit will be required. Clear wireless llc atc 305202. Expiration date: July 19, 2010 | Permit id: Com2010-01019 | |||||
Remove three antennas and install six antennas three rrus and one hybrid cable to an existing self-support tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Expiration date: June 30, 2016 | Permit id: Com2015-28891 | |||||
Construct x 15 concrete pad with equipement cabinets. And install antennas on existing tower and install 55 lin. Ft of fencing to match existing fencing per plans on the m-3 portion of premises. Note: an amended site plan to be submitted showing relocation of equipment concrete pad and fence. The relocation meets zoning approval. Expiration date: February 28, 2003 | Permit id: Com2002-08460 | |||||
Install wiring to recycling system equipment and make connections equipment as follows 1 - 200a main control panel 2 - 2hp mtrs 3 - 5 hp mtrs 2- 71/2 mtrs 1 -1 15 hp mtr 1 -15 hp cardboard boiler total 17ckts including lighting ckts Expiration date: October 8, 2003 | Permit id: Com2002-12948 | |||||
Install new 2 amp service upgrade adding 4 new circuits . Expiration date: May 12, 2003 | Permit id: Com2002-15695 | |||||
Install 1 additional equip cabinet on exist concrete pad per plans Expiration date: May 23, 2004 | Permit id: Com2003-25788 | |||||
Amend permit no. Com2003-25788 issued 5/23/03 to name prime contractor as listed above Expiration date: December 2, 2003 | Permit id: Com2003-29193 | |||||
This will be a "one for one" switchout of the existing cellular antennas located on this telecommunications tower. There will be no additional antennas added to this site. Please see attached drawings. Expiration date: January 28, 2004 | Permit id: Com2003-31456 | |||||
The installation and relocaton of an unmanned telecommunication facility on an existing telecommunication lattice tower consisting of the construction of a 98"x18 concrete pad with up to 4 equipment cabinets along with the addition of up to 9 panel antanna and associated coax and all related equipment. Expiration date: April 30, 2005 | Permit id: Com2004-05986 | |||||
Amend permit# com2004-05986 to add new license electrician name. Expiration date: December 23, 2004 | Permit id: Com2004-15167 | |||||
Amend permit #com2006-10262 issued 5/4/06 w/plans #2006-465 to add contractors as listed. Original permit description:(com2006-10262)an unmanded telecommunications facility consisting of installing a new ground equipment cabinet inside the existing fenced compound and two (2) dish antennas mounted on existing tower as per code and plans. Expiration date: November 4, 2006 | Permit id: Com2006-17361 | |||||
Original permit description:(com2015-17279)removing 3 existing antennas and replacing with 3 new antennas adding related ancillary equipment as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: October 28, 2016 | Permit id: Com2016-10954 | |||||
Install (1) panel to existing cell site (no ground work disturbance) as per plans as per code. Expiration date: October 19, 2017 | Permit id: Com2017-06721 | |||||
Install 1 80kw diesel generator on new 8 x concrete pad for existing telecom facility as per plans as per code. Expiration date: December 1, 2017 | Permit id: Com2017-07989 | |||||
Amend permit: add contractor . Extend original permit.(original permit:com2017-07989:install 1 80kw diesel generator on new 8 x concrete pad for existing telecom facility as per plans as per code.)original permit description:(com2017-07989)install 1 80kw diesel generator on new 8 x concrete pad for existing telecom facility as per plans as per code. Expiration date: December 1, 2017 | Permit id: Com2017-56957 | |||||
Reinstatement(original permit:com2015-28891:remove three antennas and install six antennas three rrus and one hybrid cable to an existing self-support tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.) Expiration date: March 16, 2017 | Permit id: Com2017-03693 | |||||
Addition of antennae on existing telecommunication structure (no height increase) addition of equipment cabinet and pad platform and addition of meter box as per plans ans as per code. Expiration date: March 1, 2009 | Permit id: Com2008-12216 | |||||
Original permit description:(com2008-12216)addition of antennae on existing telecommunication structure (no height increase) addition of equipment cabinet and pad platform and addition of meter box as per plans ans as per code. Expiration date: April 23, 2009 | Permit id: Com2009-06532 | |||||
Amend permit# com2004-28495 with plans# 2004-1447 issue date 12 9 04 to name electrical contractor as stated above. Expiration date: December 9, 2005 | Permit id: Com2004-31979 | |||||
Amend permit # com2005-12118 issued on 6 1 05 w plan # 563 to add low voltage contractor as listed Expiration date: June 1, 2006 | Permit id: Com2005-25891 | |||||
Amend permit #com2006-10262 issued 5 4 06 w plans #2006-465 to add contractors as listed. Original permit description:(com2006-10262)an unmanded telecommunications facility consisting of installing a new ground equipment cabinet inside the existing fenced compound and two (2) dish antennas mounted on existing tower as per code and plans. Expiration date: November 4, 2006 | Permit id: Com2006-17361 | |||||
Amend permit#com2010-191 issued on 9 2 with plans32010-1164 to add contractors as listed above andoriginal permit description:(com2010-19110)2 dish antennas on existing tower with required equipment as per code and plans. Expiration date: December 8, 2011 | Permit id: Com2011-24444 | |||||
Request for time extension on permit com2009-13047 issued on 07 17 09 with original completion date of 01 17 10. Original permit description:(com2009-13047)addition of 2 antennas on existing communication structure. No change in height. If installing suppression system in equipment cabinets then a separate permit will be required. Clear wireless llc atc 305202. Expiration date: July 19, 2010 | Permit id: Com2010-01019 | |||||
Add 1 circuit upgrade 1 cabinet on steel beams on grade. Remove replace 3 antennas on tower. Remove 3 antennas on tower as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required. Expiration date: December 31, 2012 | Permit id: Com2012-01683 | |||||
Reinstate permit # com2005-25891 for thirty (30) days for final inspection. Original permit description:(com2005-25891)amend permit # com2005-12118 issued on 6 1 05 w plan # 563 to add low voltage contractor as listed Expiration date: December 29, 2006 | Permit id: Com2006-36933 | |||||
Install wiring to recycling system equipment and make connections equipment as follows 1 - 200a main control panel 2 - 2hp mtrs 3 - 5 hp mtrs 2- 71 2 mtrs 1 -1 15 hp mtr 1 -15 hp cardboard boiler total 17ckts including lighting ckts Expiration date: October 8, 2003 | Permit id: Com2002-12948 | |||||
(use) use portionof premises for freight terminal w accessory office(s). Permit id: Use2008-01123 | |||||
Amend permit no. Com2003-25788 issued 5 23 03 to name prime contractor as listed above Expiration date: December 2, 2003 | Permit id: Com2003-29193 |