Install seven stainless tie-rods at the 2nd floor level of the facade, stabilize an area of brick masonry on 2nd floor facade as per vcc permit #13-35360-vcgen.

To re-install previously existing shutters on ursulines elevation making repairs as necessary. To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows to match previously existing conditions: shutters sw6925 envy,semigloss

Street cut permit to remove and replace existing vault.

To renovate building and correct violations as per architecture committee approval of 10 24 17 and materials stamped vcc approved 11 09 17. Work includes but is not limited to: brick tuck-pointing throughout property as needed utilizing mortar and details found on vcc standard detail sheet (attached) removal of exterior vinyl and plastic materials including vinyl siding, plastic lattice, and vinyl windows and doors removal of existing infill panels on the st. Philip elevation and installation of recessed stucco infill installation of new wood louvered shutter doors to replace existing plastic lattice material installation of new wood doors matched to existing to replace existing vinyl doors painting of the exterior to match existing colors and finishes unless otherwise noted on the approved plans, all repair replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or vcc mortar as spe