New construction of the unfinished portion of building to renovate and fit-out approximately 5,5 square feet of gmp support space and expansion of existing utilities to support operations.

New hvac, ducting and vaccuum pipe

Would like for construction to be coordinated with project #bld2015-08092, which is currently awaiting permit approval.

Permit to build out a previously unfinished area in the building.

Relocating fan coil box.

Installing miscellaneous process piping.

Fire sprinklers

Add a nac extender next to the existing fire alarm panel on the second floor. Use circuits on the nac panel for the expansion of area c on the first floor as shown on the drawings. Add a duct smoke detector on ahu- located on the mezzanine and connect to existing idnet circuit maintaining class a circuits. Add a new gentex a v to the existing circuit located in room 1190, maintain class a circuiting.

Fire suppresion system - area b and room 1190

Project includes the build-out of existing unfinished shell space and the remodel of other finished spaces. New spaces include: wash room, storage rooms, and several pharmaceutical manufacturing production clean rooms. These spaces will be served by new mechanical units located on the mezzanine above, and future boilers in a new 1-hour rated room, also on the mezzanine. Penetrations for new doors will be made in the existing 3-hour rates wall on the south.

Re-roof.

Installing miscellaneous process piping.

Relocating fan coil box.

Add a nac extender next to the existing fire alarm panel on the second floor. Use circuits on the nac panel for the expansion of area c on the first floor as shown on the drawings. Add a duct smoke detector on ahu- located on the mezzanine and connect to existing idnet circuit maintaining class a circuits. Add a new gentex a/v to the existing circuit located in room 1190, maintain class a circuiting.

Electrical for b575 production core expansion for actavis

Provide vav boxes, exhaust fans, and pumps.

Provide waste, vent, water, and gas piping.

Fire suppresion system - area b and room 1190

Add 3 av devices and door holders to existing panel

Electrical for new storage areas

This is a small t. I. Project. The fire sprinkler system is existing with quick response uprights being fed off of a fire pump. They will be installing a few walls with a hard lid ceiling, our intent is to simply turn the existing sprig-ups down and install new 155 degree quick response pendants.

Fire alarm renovation for watson labs.

5 appliances & 1 exhaust fan

Add and relocate existing fire sprinkler heads 6/18

Fire sprinklers for area a & c, levels 1 & 2

Fire alarm

Remodel of area b only. (see plan)

Install 2 air handlers, 8 appliances.

Install 2 sinks, 1 water heater, 65 drains, and medical gas piping

Watson labs research park area a, b & c fitout permit issue. This will be the second of two permit applications for this project.

Project includes the build-out of existing unfinished shell space and the remodel of other finished spaces. New spaces include: wash room, storage rooms, and several pharmaceutical manufacturing production clean rooms. These spaces will be served by new mechanical units located on the mezzanine above, and future boilers in a new 1-hour rated room, also on the mezzanine. Penetrations for new doors will be made in the existing 3-hour rates wall on the south.

Elec work for watson labs research park area a, b & c fitout. Any modifications to fire alarm, or need to temp power or power to panel are authorized by seperate permits.

Racking permit t. B. Zone: rp interior work only n. L. Conditional: man doors reqd every 1 with 1-1/2" outlets within 3 of latch side of each door (east half) d. W.

Locker and restroom remodel, lobby remodel

Interior t. I. (rhm signed for tb on 7/10/2013, called tb to verify), no zoning issues a. M.

Addition of h-rated storage closet in room 1504, including associated mechanical, plumbing, and electrical work. Also, we are making changes to existing doors and adding others.

Electrical modifications to existing facility

Project includes the build-out of existing unfinished shell space and the remodel of other finished spaces. New spaces include: wash room, storage rooms, and several pharmaceutical manufacturing production clean rooms. These spaces will be served by new mechanical units located on the mezzanine above, and future boilers in a new 1-hour rated room, also on the mezzanine. Penetrations for new doors will be made in the existing 3-hour rates wall on the south.

Install a concrete pad with 6 high max chainlink fence.

Remodel

New hvac, ducting and vaccuum pipe

Provide & install racking in warehouse/bldg t. B. No zoning issues a. M. T. I.

Adding heating and cooling and various exhaust systems throughout the building

Temporary use for an employee function 5/19-5/21

Install a concrete pad with 6 high max chainlink fence.

Addition of h-rated storage closet in room 1504, including associated mechanical, plumbing, and electrical work. Also, we are making changes to existing doors and adding others.

Racking permit t. B. Zone: rp interior work only n. L. Conditional: man doors reqd every 1 with 1-1/2" outlets within 3 of latch side of each door (east half) d. W.

Temporary use for an employee function 5 19-5 21

Adding heating and cooling and various exhaust systems throughout the building

Provide & install racking in warehouse bldg t. B. No zoning issues a. M. T. I.

New hvac, ducting and vaccuum pipe

Addition of h-rated storage closet in room 1504, including associated mechanical, plumbing, and electrical work. Also, we are making changes to existing doors and adding others.

Remodel

Install a concrete pad with 6 high max chainlink fence.

New construction of the unfinished portion of building to renovate and fit-out approximately 5,5 square feet of gmp support space and expansion of existing utilities to support operations.

Watson labs research park area a, b & c fitout permit issue. This will be the second of two permit applications for this project.

Elec work for watson labs research park area a, b & c fitout. Any modifications to fire alarm, or need to temp power or power to panel are authorized by seperate permits.

Install 2 air handlers, 8 appliances.

Install 2 sinks, 1 water heater, 65 drains, and medical gas piping

Remodel of area b only. (see plan)

Fire alarm

Fire sprinklers for area a & c, levels 1 & 2

Racking permit t. B. Zone: rp interior work only n. L. Conditional: man doors reqd every 1 with 1-1 2" outlets within 3 of latch side of each door (east half) d. W.

Locker and restroom remodel, lobby remodel

Add and relocate existing fire sprinkler heads 6 18

5 appliances & 1 exhaust fan

Fire alarm renovation for watson labs.

Interior t. I. (rhm signed for tb on 7 10 2013, called tb to verify), no zoning issues a. M.

This is a small t. I. Project. The fire sprinkler system is existing with quick response uprights being fed off of a fire pump. They will be installing a few walls with a hard lid ceiling, our intent is to simply turn the existing sprig-ups down and install new 155 degree quick response pendants.

Electrical for new storage areas

Add 3 av devices and door holders to existing panel

Addition of h-rated storage closet in room 1504, including associated mechanical, plumbing, and electrical work. Also, we are making changes to existing doors and adding others.

1 - monument 32 sq ft

Re-roof.

Electrical modifications to existing facility

Project includes the build-out of existing unfinished shell space and the remodel of other finished spaces. New spaces include: wash room, storage rooms, and several pharmaceutical manufacturing production clean rooms. These spaces will be served by new mechanical units located on the mezzanine above, and future boilers in a new 1-hour rated room, also on the mezzanine. Penetrations for new doors will be made in the existing 3-hour rates wall on the south.

Fire suppresion system - area b and room 1190

Provide waste, vent, water, and gas piping.

Provide vav boxes, exhaust fans, and pumps.

Electrical for b575 production core expansion for actavis

Add a nac extender next to the existing fire alarm panel on the second floor. Use circuits on the nac panel for the expansion of area c on the first floor as shown on the drawings. Add a duct smoke detector on ahu- located on the mezzanine and connect to existing idnet circuit maintaining class a circuits. Add a new gentex a v to the existing circuit located in room 1190, maintain class a circuiting.

Fire sprinklers

Installing miscellaneous process piping.

Relocating fan coil box.