Install 3 amp service with existing meter - subpanels on each floor - rewire commercial space - as per 2008 nec, fire alarm work as per nfpa 72.

Insulation replacement of fire wall ceilings. Replace sheetrock, framing as per plans. Separate use registration permit and certificate of occupancy required for first floor commercial space.

Replace windows on 2nd & 3rd floors, residential units only. Replace roof covering. 10 sq ft install new roof covering as per manufacturers specifications. New roof coverings shall not be installed without first removing all existing layers when the roof has two or more applications of any type of roof covering. Submit roof certification to inspector for final inspection. Stucco exterior - 8 sq ft exterior plaster. Installation of these materials shall be in compliance with astmc926 and astmc1063 and the provisions of this code. R703. 6. 1 lath. All lath and lath attachments shall be of corrosion- resistant materials. Expanded metal or woven wire lath shall be attached with 1-1 2-inch-long (38 mm), 11 gage nails having a 7 16-inch (11. 1 mm) head, or 7 8-inch-long (22. 2 mm), 16 gage staples, spaced at no more than 6 inches (152 mm), or as otherwise approved. Contact inspector at district office for wall inspection prior to starting work.

Install new curb trap (mixed use)

21 fixtures with piping for 3 family dwelling w water heaters

1st floor use as a restaurant and cafe. 2nd floor use as a residential dwelling. 3rd floor use as a residential dwelling.

Interior demolition of non load bearing walls and ceilings only. No other work allowed under this permit. Contact streets department for dumpster permit and footway closure. Three sets of plans drawn to professional quality are to be submitted for review and approval by the department before work on renovation starts.