Install liquid motor fuel dispensers and double walled fiberglass product piping approved for dispensing of motor fuels into the fuel tanks of motor vehicles operated by persons other than a fuel dispensing facility attendant from storage tanks. Compliance with the 2013 phila fire code for motor fuel dispensing facilities and all other applicable codes or standards is required. Approval of this permit notwithstanding. Code design professional: robert irons, p. E. Six -3 grade gasoline dispensers; two - 3 & 1 gasoline and diesel dispensers; fiberglass product piping and other incidental work

Install 1- 120v gfi circuit for hot holding warmer.... In accordance with 2008 nec

Sewer connections, laterals and house traps for new sitework and building construction - (2)6" sanitary sewer connections, laterals and house traps - (2)12", (1)12"x24", (2)15"x24" & (1)15"x27" storm sewer connections and laterals - pa1 call # 20140410348 - note: sewer connections to the city mains only - sitework "by others" (separate permit required), no l & i permit required for the 2" and 4" water service connections noted on the approved plans

Complete demolition of existing two (2) story detatched building as per approved plans and submitted documentation. Work must comply with code bulletin b-1302. Safety plan must be on-site at all times. Separate streets department street closure permit is required prior to the start of construction.

Furnish 2-ckts & wire 2-sign as per nec 2008 (retail) east district

New construction: install 6 gilbarco 500s gas dispensers and 2 gas plus diesel dispensers, 5 - 2 hp 5tp motors, 5 mechanical leak detectors, 3 interstitial sensors, sump sensors, 8 dispenser pan sensors, 5 mag probes and 1 veeder root 3 as per 2008 nec (east district)

Install 800amp 3 phase, 4 wire 120 208v service, panels, lighting, recepts, switches, and hvac wire as per 2008 nec (east district)

Excavation for and installation of three (3) underground fiberglass tanks (20,0 gallon capacity per tank), concrete slabs at grade level above tanks and at fuel dispensing areas. Permit does not authorize dispenser piping installation - separate approval required. All work shall be completed in accordance with pennsylvania d. E. P. Regulations, nfpa and all other applicable codes.

Fire alarm and security system wiring per 2008 nec & nfpa 72 (retail)

Constructing modular block retaining walls and light post for grading purposes at future wawa retail site as per plans.

2" & 4" domestic water service (comm)pa20141391028 "self-certifications are no longer permitted" - "all excavations and plumbing trenches in excess of 5 feet in depth must have approved shoring in place at the time of inspection"

New plumbing installation for wawa store (commercial) - interior plumbing to a point 5-0" outside only - site sewer water connections to the city mains are "by others"

For interior alterations to an existing structure to include new partitions, new accessible toilet rooms and all other alterations as per approved plans.

Installation of exterior signs as per engineers design and sketches. Includes this permit pylon signs and footings, wall signs and accessory directional , informaiton signs

Install 1-3 sided plyon sign @254 sq ft each side total 762. 2 sf (100" high) (engineer sealed sketches enclosed).