Install new faces in existing pylon sign

Removal and replacement of three (3) roof top mechanical units on an existing retail store as per approved plans. Work to include reinforcement of existing roof structure to support rtus.

Retail sale of fireworks as part of retail sales of merchandise. All sales within enclosed buildings.

Interior renovations

Retail sale of fireworks as part of retail sales of general merchandise. All sales within enclosed buildings.

Tenant fit-out to inclusde new light fixtures, recepts, swithches, signs, tle-data and cabling and door bell. The service and roof top units will be done by others. All work done in accordance with 2008 nec(commercial)(south dist)

Install receptacles, occupancy sensors, light fixtures, emergency and exit lights (south dist)

Install water closet, lavy, mop sink, and water cooler

Replacing service with 4 o al to ct cabinet and feeding 2 panels with 3 o conductors as per 2005 nec (south district)

Erect one flat wall sign & one pylon sign (five window grapic signs) acc. To a t-mobile store- space #2.

Reface one (1) freestanding accessory sign. Sign accessory to existing retail sale of consumer goods in space #2 of existing area shopping center with other uses as previously approved.

Flat wall sign installation per prescribed limitations noted on the wall sign application. The approved reference site plan is attached. Activity will take place in space #10. Post this permit post the project information sign

Open floor and connect to existing drain, new fixtures

Interior fit-out for medical office.

Interior alterations for retail tenant space #5 (dollar general) as part of a multi-tenant retail commercial building to incl. Vct, acoustical ceilings, interior partitions

For the removal of one (1) existing flatwall sign. For the erection of one (1) accessory internally illuminated (non flashing non intermittent) flat wall sign, face change for a double faced panel on an existing accessory freestanding sign (31. 75 sq. Ft each), and legalization of the erection of a double face sign panel on an existing accessory freestanding sign. Size and location as shown on application plan.

Install 1 - 100amp sub panel, install 2 circuits for fluorescent lights as per 2008 nec (south district)

For selective interior demolition and a change in occupancy classification and interior alterations to create a new educational space in an existing building. Separate permits required for mechanical, electrical, and plumbing systems. All asbestos to be treated & removed prior to commencement of work.

For the removal of one (1) existing wall sign and for the erection of one (1) accessory internally illuminated (non intermittent non flashing) wall sign in space # & for the face change on an existing accessory freestanding sign.

For the repositioning of an existing cabinet wall sign, replacing a face plate and replacing face flates on an existing multi tenant freestanding plyon as per plans.

For the installation of 1 internally illuminated flat wall sign cabinet mounted to building fascia in space 5 and the installation of double faced panels in pylon 1 and pylon 2.

Install 25 receptacles & 6 phone data lines.

1- 60a sub-panel (3ph, 208 120v sub-panel) for new installation of 7- light fixtures, 6- receptacles, 3- exit emerg lights in accordance with 2008 nec no fire alarm work on this permit

Install water closet, lavatory, 2- urinal, mop sink, water cooler drain

For the erection of one(1) flatwall sign sign accessory to existing business support ( retail paints shop) on space # as part of existing area shopping center with all other uses as previously approved. Size location as shown in the application.

Low voltage. Install cat 6 four pair cabs voice, data, and pos applications. All cabs will supports in j hooks above drop ceiling and home run from the comm closet dev location as per 2008 nec (commercial)(south dist)

Relocate existing outlets only, no work lighting service low voltage work as per 2008 nec

Relocate 5 vents thruout

Replacing older t-12 fixtures with new t-8 fixtures (58), relocating 12 existing devices (recepts) all service, hvac, remain existing, replace existing em and exits packs (south district)

"relocate 18 diffusers" permit to include the relocation of 18 diffusers no additional ductwork or equipment approved under this permit.

Fixture installation

Relocate 8 sprinkler heads.

Retails sales of consumer goods in tenant space #5 as part of a multi-tenant building

Level 2 alteration: installation of non load bearing wall. See prior permit ap# 934 for tenant fit-up.

Install 2 wc 2 lavs 1 prep sink and 1 water cooler(commercial retail)

Install 2 light fix, 4 recept ckts and 1 switch in accordance with 2008 nec(commercial retail)

Install lighting sub-panel, receptacles as per nec 2008 & fire alarm as per nfpa 72

Install 10-outlets, repair 12-outlets, 5-switches, install 6-new emergency lights to existing 200amp panel -lighting already exist as per nec 2008 (comm) south district

Relocate ten sprinkler heads

Relocate diffusers.

Tenant fit-up for t-mobile

Tenant fit-up for t-mobile-ductwork

Lay in fxts, sws, 25 recept outlets, 25 voice data outlets tenant fit out (south dist)

Interior alterations to include erection of non-load bearing partitions, gypsum wall board throughout, drop ceiling, flooring and doors as per plans. Separate permits required for interior wall sign and any mechanical or electrical work.

Install water closet and lav

Military recruiting office in shopping center

Retail sale of fireworks as part of retail sales of merchandise. All sales within enclosed buildings.

Install new: 2 wc, 2 lavs, 1 ks, 1 drink f