Content | Date | Cost | Contractor Rank | Address | Contractor |
---|---|---|---|---|---|
Alteration permit Date: March 28, 2012 Client: Lajara Alexis A | Permit status: Completed | Permit id: 396116 | |||||
Permit for a rooming house with four (4) rooming units for a maximum of seven (7) occupants within an existing three (3) story attached structure; all occupants capable of self preservation and self sustaining; no occupant under the jurisdiction of any court system. Date: April 29, 2010 Client: Mejia Jetty A | Applicant: Franklin Munoz | Permit type: Appeal | Permit status: Withdrawn | Permit id: 11565 | |||||
Alteration permit Date: March 28, 2012 Client: Lajara Alexis A | Permit status: Completed | Permit id: 396116 | |||||
Permit for a rooming house with four (4) rooming units for a maximum of seven (7) occupants within an existing three (3) story attached structure; all occupants capable of self preservation and self sustaining; no occupant under the jurisdiction of any court system. Date: April 29, 2010 Client: Mejia Jetty A | Applicant: Franklin Munoz | Permit type: Appeal | Permit status: Withdrawn | Permit id: 11565 | |||||
SCORE 100 Ez plumbing permit standards - work to include replace curb trap, main drain, replace rain leader cesspool. "self-certifications are no longer permitted" - "all excavations and plumbing trenches in excess of 5 feet in depth must have approved shoring in place at the time of inspection" Date: May 2, 2017 Contractor: Jack Edmondson Inc Client: Perez Isabel Colon Victor | Permit type: Plumbing permit | Permit status: Completed | Completion date: May 19, 2017 | Permit id: 779995 | |||||
Stucco front wall of single family home. Owner occupied. Work being done by owner. No employees. Stucco_-_exterior plaster. Installation of these materials shall be in compliance with astmc926 and astmc1063 and the provisions of this code. R703. 6. 1 lath. All lath and lath attachments shall be of corrosion- resistant materials. Expanded metal or woven wire lath shall be attached with 1-1 2-inch-long (38 mm), 11 gage nails having a 7 16-inch (11. 1 mm) head, or 7 8-inch-long (22. 2 mm), 16 gage staples, spaced at no more than 6 inches (152 mm), or as otherwise approved. Contact inspector at district office for wall inspection prior to starting work. Date: March 28, 2012 Client: Lajara Alexis A | Permit type: Alteration permit | Permit status: Completed | Completion date: June 5, 2014 | Permit id: 396116 |