Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
(apt. #5) at private hall, restore water damaged oak plank floor. Stain and finish to match existing flooring, 15 sq. Ft. Remove all work related d Permit type: Gc | Permit id: E309622 | |||||
Apt.#5 :remove damaged oak floor at foyer ( sq. Ft.) replace with same type oak flooring or similar type. Sand and polyurethane to a good finish Permit type: Gc | Permit id: E325897 | |||||
(apt. #4) trace and correct condtions preventing an adequate supply of hot water from reaching all fixtures thru-out building. Remove all work relat Permit type: Heat | Permit id: E405035 | |||||
Boiler room remove rubbish, some flamable and two section or cast irom boiler. (3 cubic yards) see ms. Gabriel jones for access to cellar through Permit type: Gc | Permit id: E300773 | |||||
Location ; front areaway , stairs ; supply all labor , materials and welded plate with angle irons , to stringers ; to repair stringer and to rei Permit type: Gc | Permit id: Eg11661 | |||||
At public parts, windows on all floors properly install the window guards complete with stops and one way screws in the following areas: repair 1 Permit type: Gc | Permit id: Eg18798 | |||||
SCORE 95 Client: Arthur Powers | Client Address: 16 Barrow St Ny Ny 10014 | Client Phone: (212) 929-4200 | Client Company: Aerie Leroy Corp | Permit status: Initial | Permit id: 100368424 | |||||
SCORE 97 Client: Alex Varveris | Client Address: 89-07 34 Avenue Queens Ny 11372 | Client Phone: (718) 899-2800 | Client Company: O-Porto Holding Co. | Permit status: Initial | Permit id: 104133260 | |||||
SCORE 98 Client: Arthur Powers | Client Address: 16 Barrow St Ny Ny 10014 | Client Phone: (212) 929-4200 | Client Company: Aerie Leroy Corp | Permit status: Initial | Permit id: 100368424 | |||||
(apt.# 11) restore heating plant to proper working order heating plant is currently emitting smoke. Note: vendor must sign and return with your b Permit type: Heat | Permit id: E308143 | |||||
Adjust mixing valve and aquastat. Set for 1 degrees note: contractor must contact hpd at 718-636-3026 with start dates. Contractor must sign and Permit type: Heat | Permit id: E618078 | |||||
Install (epuch 60) heat timer, gauge assembly, vaccum and over haul boiler. Note: vendor must sign and return with your bid: contractor is to Permit type: Heat | Permit id: E310105 | |||||
#2 oil boiler: adjust mixing valve to provide adequate hot water to building. Set temp. At 120 to prevent scalding. Note: contractor must cont Permit type: Heat | Permit id: E624838 | |||||
At #2 oil boiler: supply and install a new automatic mixing valve and thermometer. Set temperature at 1 degrees to prevent scalding. Note: co Permit type: Heat | Permit id: E627463 | |||||
At #2 oil boiler: supply and install a new automatic mixing valve and thermometer. Set temperature at 1 degrees to prevent scalding. Note: co Permit type: Heat | Permit id: E627463 | |||||
At #2 oil boiler: supply and install a new automatic mixing valve and thermometer. Set temperature at 1 degrees to prevent scalding. Note: co Permit type: Heat | Permit id: E627463 | |||||
At #2 oil boiler: supply and install a new automatic mixing valve and thermometer. Set temperature at 1 degrees to prevent scalding. Note: co Permit type: Heat | Permit id: E627463 | |||||
At #2 oil boiler: supply and install a new automatic mixing valve and thermometer. Set temperature at 1 degrees to prevent scalding. Note: co Permit type: Heat | Permit id: E627463 |