Replace the existing shutters on the burgundy st elevation with fixed louvered shutters of the same proportions/dimensions.

To install a total of six (6) security cameras around property as follows: two (2) on burgundy elevation one (1) on governor nicholls elevation one (1) on barracks elevation two (2) on n. Rampart elevation. All cameras to be onix ipb3mirw bullet style cameras. All camera housings to be painted to match the adjacent wall surface to which they are mounted. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit. To install a model f-2 biometric access reader. Reader to measure 5. 3 x 2. 2 x 1 and be installed in existing alleyway gate. All new installations as per cut-sheets submitted 07/29/15.

To install a total of six (6) security cameras around property as follows: two (2) on burgundy elevation one (1) on governor nicholls elevation one (1) on barracks elevation two (2) on n. Rampart elevation. All cameras to be onix ipb3mirw bullet style cameras. All camera housings to be painted to match the adjacent wall surface to which they are mounted. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit. To install a model f-2 biometric access reader. Reader to measure 5. 3 x 2. 2 x 1 and be installed in existing alleyway gate. All new installations as per cut-sheets submitted 07/29/15.

Walls: "archive" #227, flat or satin finishwooden elements including doors, windows, frames, shop windows, fascia/soffit/outriggers of gallery: "tallow" #203, semiglosstrim: "tallow" #203, semiglossshutters: "card room green," #79, semiglossironwork: "black blue" #95brand name of paint: farrow and ball

For vcc approvalthis is an application to replace the existing shutters on the burgundy st elevation with fixed louvered shutters of the same proportions/dimensions.

Per drawings and materials approved by the architecture committee on 07 26 16 and stamped vcc approved 09 07 16, as follows:remove existing, non-historic louvered shutters,install new, single panel fixed-louver shutters, per attached drawings, using clarks tip hinges, or equal. Shutters shall fit completely within existing openings when in closed position. Panel mouldings, stile and rail dimensions, and exposure of louvers to match typical historic details and existing historic french doors, per drawings. Back prime all millwork and paint shutters to match existing. All repair replacement work shall match existing in color, size, material, detail, profile and exposure (except as otherwise noted). This permit prohibits the application of the following exterior coating materials and paints: sealers, ceramic coatings paints, elastomeric coatings paints, waterproofing water repellent coatings.

To resolve existing vcc violations, per violation case #16-12135:retain existing light fixtures on front elevation, to be relocated to the abat-vent and centered over door openings. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 600-8 lumens per bulb. Remove unused electrical boxes on the front elevation, tighten all wiring and paint to match adjacent surface. Remove address numbering from gateremove unshielded light fixture on barracks elevation and install new remcraft flush mount double-headed bullet sconce, 3. 125" d x 6. 875" lremove inappropriate window screen on governor nichols elevationrepoint masonry chimney using vcc mortar formula (attached) all mortar to be mixed using the vcc recipe (attached) with a maximum of 1 part portland cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted.

Walls: "archive" #227, flat or satin finishwooden elements including doors, windows, frames, shop windows, fascia soffit outriggers of gallery: "tallow" #203, semiglosstrim: "tallow" #203, semiglossshutters: "card room green," #79, semiglossironwork: "black blue" #95brand name of paint: farrow and ball

Replace the existing shutters on the burgundy st elevation with fixed louvered shutters of the same proportions dimensions.

To install a total of six (6) security cameras around property as follows: two (2) on burgundy elevation one (1) on governor nicholls elevation one (1) on barracks elevation two (2) on n. Rampart elevation. All cameras to be onix ipb3mirw bullet style cameras. All camera housings to be painted to match the adjacent wall surface to which they are mounted. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit. To install a model f-2 biometric access reader. Reader to measure 5. 3 x 2. 2 x 1 and be installed in existing alleyway gate. All new installations as per cut-sheets submitted 07 29 15.

To install a total of six (6) security cameras around property as follows: two (2) on burgundy elevation one (1) on governor nicholls elevation one (1) on barracks elevation two (2) on n. Rampart elevation. All cameras to be onix ipb3mirw bullet style cameras. All camera housings to be painted to match the adjacent wall surface to which they are mounted. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit. To install a model f-2 biometric access reader. Reader to measure 5. 3 x 2. 2 x 1 and be installed in existing alleyway gate. All new installations as per cut-sheets submitted 07 29 15.

Renovation of existing kitchen - upgrade cabinets and appliances, sheetrock, paint etc.

Emergency structural repairs to exterior wall - deteriorated sill beam and top plate destabilized exterior wall of existing structure - vcc approval needed to remove weatherboards, repair and stabilize sill beam and wall structure, replace weatherboards to match existing, and repaint exterior wall to match existing.