Replace (1) pole and install 433 ft of oh cable as indicated on attached prints - wr# 3461549 - hduperly - dac

Replace (1) pole, (2) guys, and install 299 ft oh cable at 1101 howard rd se, as indicated on attached prints. Wr# 3461549 - hduperly - dac

Replace (1) pole, (2) guys, and install 299 ft oh cable at 1101 howard rd se, as indicated on attached prints. Wr# 3461549 - hduperly - dac

Replace (1) pole, (2) guys, and install 299 ft oh cable at 1101 howard rd se, as indicated on attached prints. Wr# 3461549 - hduperly - dac

Replace (1) pole and install 433 ft of oh cable as indicated on attached prints - wr# 3461549 - hduperly - dac

Replace (1) pole and install 433 ft of oh cable as indicated on attached prints - wr# 3461549 - hduperly - dac

Replace (1) pole, and (2) guy wires, install 299' oh cable at 1101 howard rd se, as indicated on attached prints. Wr# 3461549 - hduperly - dac

Other reserved parking

Construction staging area

Construction staging area

Over head work; pole installation (single or first one), over head work; pole removal (single or first one), over head work; string electrical wire

Over head work; guy wire installation (each addl), over head work; guy wire installation (single or first one), over head work; pole installation (single or first one), over head work; pole removal (single or first one), over head work; string electrical wire

Over head work; pole installation (single or first one), over head work; pole removal (single or first one), over head work; string electrical wire

Replace (1) pole, and (2) guy wires, install 299' oh cable at 1101 howard rd se, as indicated on attached prints. Wr# 3461549 - hduperly - dac

Replace (1) pole and install 433 ft of oh cable as indicated on attached prints - wr# 3461549 - hduperly - dac

On behalf of the district of columbia water and sewer authority (dc water), the dc clean rivers (dccr) project requests the approval to abandon a monitoring well (bpc-36) and a vibrating wire piezometer (vwpz: bps-35). The monitoring well and vwpz were installed by dccr during the investigation and design phase to provide information regarding subsurface conditions. Construction of the tunnel and near surface structures under division a is now complete. Therefore, the wells installed as part of this division is no longer needed and will be abandoned. The monitoring well will be abandoned by either removing the well casing or perforating the well casing in the screened interval and filling the well with a cement bentonite slurry, or by backfilling with medium, hydrated, bentonite pellets in accordance with the well regulations (1831. 5). All wells will be abandoned following doee regulations. See attached work plan for more details.

Excavation; boring test pit (each addl)

Refer to approved traffic control plan (tcp ) for permitted hours of work; drill 1 soil boring in the grass area 41 feet from the edge of howard road. The boring is in support of the dc water ltcp. The boring will be eight inches diameter and up to feet deep and drilled using a hand auger and air knife/vacuum extraction.

Over head work; guy wire installation (each addl), over head work; guy wire installation (single or first one), over head work; pole installation (single or first one), over head work; pole removal (single or first one), over head work; string electrical wire

Over head work; pole installation (single or first one), over head work; pole removal (single or first one), over head work; string electrical wire

Over head work; guy wire installation (each addl), over head work; guy wire installation (single or first one), over head work; pole installation (single or first one), over head work; string electrical wire, over head work; pole removal (single or first one)

On behalf of the district of columbia water and sewer authority (dc water), the dc clean rivers (dccr) project requests the approval to abandon a monitoring well (bpc-36) and a vibrating wire piezometer (vwpz: bps-35). The monitoring well and vwpz were installed by dccr during the investigation and design phase to provide information regarding subsurface conditions. Construction of the tunnel and near surface structures under division a is now complete. Therefore, the wells installed as part of this division is no longer needed and will be abandoned. The monitoring well will be abandoned by either removing the well casing or perforating the well casing in the screened interval and filling the well with a cement bentonite slurry, or by backfilling with medium, hydrated, bentonite pellets in accordance with the well regulations (1831. 5). All wells will be abandoned following doee regulations. See attached work plan for more details.

Construction staging area

Construction staging area