Installation of motorola supplied equipment for chicago dept. 1 antenna 3 cabinet racks on existing parking garage.

Installation of (1) s f non illuminated interior wall sign

Installation of (1) internally illuminated wall sign located within terminal 3 of the airport

Interior, non-structural remodel of an existing mercantile occupancy with no intended change of occupancy.

Non-structural remodel of existing restaurant bar area for goose island; scope includes minor demo, electrical, painting and plumbing (conditional permit subject to field inspection)(no hvac work or cooking or refrigeration equipment within permit scope) (existing exit signs signs to remain; no changes)

Interior alteration to an existing mercantile space. No change in use.

Interior non-structural remodel of an existing mercantile occupancy with no intended change of occupancy. Mech, elec, and plumb. Conditional permit subject to field inspection

Installation of (1) interior mounted illuminated sign to be installed within o'hare international airport terminal 2 concourse ef spaces 18-19

Remove & replace existing 15kv feeder #28 at o'hare airport. Db job t-7658.

Installation of (1) s f internally illuminated sign cabinet to be mounted inside of o'hare airport in terminal 1 concourse c

Installation of (1) d f non illuminated sign cabinet to be mounted inside of o'hare airport in terminal 1 concourse c

Installation of (1) non illuminated sign mounted inside ohare international airport terminal 1b

Installation of (1) non illuminated sign mounted inside ohare international airport terminal 3hk

Remove and replace existing fire pumps (2 electric & 1 deisel) that services terminal 1,2,3 at o'hare international airport. New electrical service, concrete restoration and misc. Carpentry work.

Interior build out for fast food restaurant as per plans. Conditional permit subject to field inspections

Change of electrical contractor for general contractor building permit #100316637 for electrical buildout of new tenant space at terminal 1, concourse c for america's dog

Installation of (1) set of internally illuminated channel letters to be mounted to the east elevation of the space located within terminal 2 of o'hare international airport.

Installation of (1) set of internally illuminated channel letters to be mounted to the north elevation of the space located within terminal 2 of o'hare international airport.

Install five 120 volt 20 amp circuits for the power poles in gates e9, e10, e11, e12 & e13for delta airlines at ohare airport. Power from panels on the lower level

Sign installation on existing circuit.

Install 8 electric car chargers

Install level iii car charging station

Installation of (1) set of internally illuminated channel letters and (1) set of fco letters to be mounted together to make the one sign.

Installation of (1) internally mounted interior illuminated sign that measures less than 4 square feet.

Install 1 new antenna on an existing tower for the oemc and the chicago fire department communications system

Electrical maintenance for month of june 2012 in areas controlled by smg. Areas not included: all escalators, elevators, all doors (includging overhead, rollup & respective operators, all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage.

Electrical maintenance for month of july 2012 in areas controlled by smg. Areas not included: all escalatorrs, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of bulding-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage.

Electrical maintenance for month of august 2012 in areas controlled by smg. Areas not included: all escalatorrs, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of bulding-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage.

Electrical maintenance for month of september 2012 in areas controlled by smg. Areas not included: all escalatorrs, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of bulding-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage.

Running conduit to sign - 25'

Electrical maintenance for month of october 2012 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage.

United 20ft logo

United 10ft logo

Elevation on swiss air cargo bldg 616 south access road

Electrical maintenance for month of november 2012 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage.

Install 2 - 4' fixtures using existing circuit in sunglass hut #3411 - chicago o'hare - concourse h k

Electrical maintenance for month of october 2012 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage

Electrical maintenance for month of january 2013 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage

Installation of new technology cellular antennas, equipment and cabling. T-mobile site # ch94167a wigdahl job # il-01-25482

Installation of new technology cellular antennas, equipment, and cabling. T-mobile site # ch74863a wigdahl job # il-01-25483

Install new floor box with (2) duplex receptacles on separate circuits in terminal 1, checkpoint 1

Electrical maintenance for month of february 2013 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage

Install conduit and wiring for new hot water heater

Electrical maintenance for month of march 2013 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage

Innerduct, fiber, and coaxial cable installation at terminals 1,2,3, and 5.

Electrical maintenance for month of april 2013 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage.

Install 2- electrified signs and 4 - non-electric acrylic signs.

Installing new coaxial cable to each tarmac antenna location in terminal three for sprint cellular coverage

Led illuminated reverse channel letters

Install led illuminated blade sign

Remove and replace 300kw generator and transformer switch

Electrical maintenance for month of may 2012 in areas controlled by smg. Areas not included: all escalators, all elevators, all doors (including overhead, roll-up & respective operators), all jet bridges (responsible only for power to exterior of building-line side), all overhead lighting under terminals, all exterior roadway lighting, all parking lot lighting, all aircraft roadway lighting along with runway lights and directional signage

Install interior led illuminated blade sign

Install interior led illuminated channel letters

Electrical installations and revisions of the cart return corrifor to one stop exspress. Passageway at terminal 5. Work is associated with building permit number 100485355

Install led illuminated blade sign

Install led illuminated blade sign

Install led illuminated channel letters

Permit expires on 12 11 2013 erection starts: 10 16 2013, erection ends: 10 17 2013. Temporary tent for the ohare intl. Airport runway commission, oct. 17, 2013. 1 - 82' x 164' tent. Partytime hdo productions, inc.

Hardwire (73) open area office workstations with 8 duplex receptacles per station. Circuits by general contractors electrician. Ohare airport united airlines building 710 service center

Disconnextion two ramp kiosks and reconnecting both of them at o'hare airport

Terminal 1 - blade sign

Terminal 3 - spa sign

Remove and replace motor contact controls. Feed new pumps. The work is being done at o'hare airport at 10000 w. O'hare avenue

T1 - c councourse advertising panel #1

Advertising panel - t1 - concourse c - #2

Advertising panel - t1 - b concourse - panel #1

T1 - b concourse - advertising panel #2

Repair existing code violations to existing ductwork installation @ subway t3 rotunda.

Removal and replacement of 391,841 sf roof system on o'hare airport international terminal 5 to include 2,012 sf of modular green roof trays. No electrical work. No plumbing work.

Electrical hook up for lighting in a kiosk at o'hare airport.

Install one mitsubishi 3 1 2 ton split system,air cooled, r410a,located on roof terminal 3. The split system serves garrett popcorn.

Demolition of a 1 story building previously owned by american airlines.

Ec registraction

Tear off and replace roof of o'hare heating and refrigeration building #450